Actually really enjoy mine. Get SimShaker for Aviators (free) while you're at it.
Actually really enjoy mine. Get SimShaker for Aviators (free) while you're at it.
Vnice..is it sturdy enough?
VThat plate is you highlitghed is too low, and you would not have the space to mount the rhino (it would be obstructed by the keyboard tray and by the central arm).
What I plan to do is to mount that central arm lower (to the next holes) and use a 3d printed plate which attaches directly to it.
I found this one on the internet...it's for the winwing orion 2....
https://www.printables.com/model/636215-joystick-adapter-for-next-level-racing-flight-simu
maybe someone with the skills can design a larger one for the rhino
or the same can be adapted some way. A wooden base with the same dimensions of the Rhino lower base can be screwed to it.
The alternative is to don't mount the central arm...and floor mount the rhino with a large wooden base.
It would not be optimal for me as I don't want to use extensions...but it could be a solution
What I plan to do is to mount that central arm lower (to the next holes) and use a 3d printed plate which attaches directly to it.
I found this one on the internet...it's for the winwing orion 2....
https://www.printables.com/model/636215-joystick-adapter-for-next-level-racing-flight-simu
maybe someone with the skills can design a larger one for the rhino
or the same can be adapted some way. A wooden base with the same dimensions of the Rhino lower base can be screwed to it.
The alternative is to don't mount the central arm...and floor mount the rhino with a large wooden base.
It would not be optimal for me as I don't want to use extensions...but it could be a solution
LThat's what I did, I took an MDF base plate of 55 x 90 cm, some 2 by 4 and an Ikea chair (which Buttkicker broke already 
). But if you can lower the round plate low enough, I'd try attaching base plate to that first 
). But if you can lower the round plate low enough, I'd try attaching base plate to that first 
Ahttps://youtu.be/BUxMyIdAb6Q?feature=shared
This could be a nice base for a FFB Yoke. At 13:30 min. you can see the inside.
This could be a nice base for a FFB Yoke. At 13:30 min. you can see the inside.
YouTubeRuss Barlow
A detailed review of the features and performance of the new SmartFly Yoke from Ray Dynamics in India. Similar to the Yoko+ in many ways but at a fraction of the cost could this be for you? See it in action and hear my pros and cons before a final recommendation.
ACosts 399$ without Tax, shipping, etc.
SI preorded mine in may of this year, so what 7ish months?
SHonestly way less than I thought it would be. I trully wasn't expeting it till next year
SAnd now the bottleneck to playing with it is lack of mount lol. Never thought monstertec would be the delay here
SMonster tech has been out of stock for all kinds of thing. I had to order the MiP thing from Germany.
SI guess I have a ways out to start planning on how to set it up.
SNo, the dimentions are all diffrent. You'll need to either purchase one or make one unfrotunatly. The Virpil mouse pad "plate" is actually big enough, but you'd still need to at least drill your own holes through the steel.
Soh boy lol
SI thought there was an option to order the Mostertech mounting plate. Maybe I read that wrong
SThere is. But I don't have ANY monstertech stuff so I just ordered a full table mount from them directly. They offer a rhino plate on their site.
SGot it. I have the monstertech stuff already. I was thinking about going with the Chassis setup, but ill probably run in to problems mounting the Rhino on there.
DAh, so it will require a custom mount?
SI've been reading that people are having to drill holes, and modify things to make it work
S3d printing things etc.
DHmmmm. I do not mind drilling to mount it to a QR4Rigs base plate.
SYou would think if monstertech has a mounting plate for it, it should fit on to whatever.
DLike a dummy I did not order the monster tech plate when I paid for my Rhino order.
Swe can switch spots and you can have a second chance lol
SI'm sure you can add it on to your order
BAnd there isn't a need to cue for any of the extras.
Fedex might laugh on the way to the bank, but no need to wait another 7++ months
Fedex might laugh on the way to the bank, but no need to wait another 7++ months
SMonster tech offers a VP rhino mounting option for all their stick mounts on their website. So you can always just get that
DUgh'. Then I have to get a quick release for the monster tech mount. Imagine if there was a common mounting system! The mind boggles!
AHi everyone. I build custom flight simulators and am looking at adding force feedback to one of them. What kit should I order that will be the most powerful? We have a dual linked yoke setup and will connect the motors into the control system but it will need to be rather powerful. Are these system tested for high load for 5+ minutes, or will they overheat/break? Any tips would be great.
DWhat does that offer that the software doesn’t already?
JFrom what I gathered (not an expert) it was just much more catered to flying instead of driving sims.
JI’ve never used the shipped software
DWhat does the software look like, what options does it have?
JIt automatically chooses what type of aircraft you’re flying. Like when I hop in a helo versus a jet airplane
JIntensity, zone testing, etc.
JIt’s free, so worth a try
DThis is what the native software looks like
Jpleasantly surprised they're putting work into it
Dan example of the pad motor options turning them on/off and setting a desired vibration amount
Dthis is a generic setup an won't modify per aircraft chosen, but it's a good start
Dfor flight sims, it only offers MSFS, Xplan11 and DCS, no IL-2, BMS, Prepar3D etc
Dor Warthunder.
V
RHINO #0322 Has Shipped!V 
RHINO #0323 Has Shipped!V 
RHINO #0324 Has Shipped!DGetting closer to mine being shipped!
Vwow 3 rhinos in a day
Dhe is a machine.. or a robot.. terminator?
BIt actually says out for delivery now.
Guess it made it through customs like a bullet, well a bullet would not go through customs, but you get my drift.
Guess it made it through customs like a bullet, well a bullet would not go through customs, but you get my drift.
BSo, who here thinks the driver will take half a look at my street as it is a 15° incline and say "nope"
Athe shipping game was a far more exciting sport back when the labels still said something about rhino horns and other parts