Good evening! I had a question regarding order#587. I was invoiced and paid the order, and the ord

Good evening!

I had a question regarding order#587. I was invoiced and paid the order, and the order status changed to "paid." Then I was invoiced again, but this time for a lower amount? The charge shows on my credit card statement.

Ttomatoflames Good evening! I had a question regarding order#587. I was invoiced and paid th...

walmis•1/11/24, 7:42 AM

You can disregard that, clerical error. Will ship it today.

Snubblaren•1/11/24, 10:31 AM

anyone who had problems with avira moving telemffb to quarantine?

SSnubblaren anyone who had problems with avira moving telemffb to quarantine?

Number481•1/11/24, 12:17 PM

🧰support

DAPA•1/11/24, 5:54 PM

Hi @walmis ...I have a question for you - I recently bought the new v2 Realsimulator FA-18 stick handle to use with my RS FSSB side stick. I'd really like to use it with the Rhino as well, and for the most part it works with the 64-button Generic Grip profile in the VPforce configurator, except for a few buttons which won't register or map in the button mapping section. They show as buttons 62 & 63 in the Realsimulator config tool, but no dice on VPForce. Is there something I can do to help troubleshoot this to figure it out?

DAPA•1/11/24, 5:55 PM

This is the handle I bought (F18CGRH v2):

DAPA•1/11/24, 5:55 PM

https://realsimulator.com/f-18-center-grips/

Realsimulator

F-18 Center Grips - Realsimulator | Online Shop

F-18 center grips have the true and ergonomic F/A-18E Super Hornet shape and are manufactured in high density resin in a one-piece body construction. Visit us for more info.

DAPA•1/11/24, 5:55 PM

FYI - the RS F-16 grip works great with the Rhino profile.

356thFS_Piranha•1/11/24, 6:05 PM

Is there a way to turn down the volume of the buzzing the VPforce makes when lowering and raising the landing gear? The flaps are fine, not that load.

Number481•1/11/24, 6:13 PM

356thFS_Piranha•1/11/24, 9:17 PM

Can the Telem adjustments be made while flying the sim? And it says to turn shake to ) in IL2 but do you check IL2 Shake Master in the Telem App?

3356thFS_Piranha Can the Telem adjustments be made while flying the sim? And it says to turn shak...

Number481•1/11/24, 9:30 PM

They can, yes. IL2 is a bit strange since it stops sending telemetry when the window focus changes, so if you change a setting you wont feel the effects until the game window regains focus.

All of the IL2 effects under the 'shake master' are duplicates of existing effects in IL2 natively (that I personally thought are done poorly so implemented my own in TelemFFB). You don't strictly need to disable the shake force in IL2, but it might be...weird... if you have both enabled at the same time

356thFS_Piranha•1/11/24, 9:35 PM

Why are there 2 buffetting choices, same with weapons etc.

356thFS_Piranha•1/11/24, 9:35 PM

one has a value and the other doesn't?

356thFS_Piranha•1/11/24, 10:35 PM

Also, How do you save settings?

356thFS_Piranha•1/11/24, 10:36 PM

Everytime I exit out it reverts back to IL2 Shake master in the app.

356thFS_Piranha•1/11/24, 10:36 PM

Do you start up the game first? Does it matter?

356thFS_Piranha•1/11/24, 11:11 PM

Propellor rumble and Shake Master always return on start up . As soon as i turn them off while in game I lose all other FFB functions.

3356thFS_Piranha Why are there 2 buffetting choices, same with weapons etc.

Number481•1/11/24, 11:21 PM

sorry... I don't understand. It should look like this

356thFS_Piranha•1/11/24, 11:23 PM

It does look like that. I have been trying to run without IL2 shalke master selected because I thought you told me that it didn't perform as well with it on.

356thFS_Piranha•1/11/24, 11:23 PM

I turn Shake master off in all the settings but it reverts back on on start up?

Number481•1/11/24, 11:27 PM

If you turn it of, it should stay off for that aircraft until you turn it back on again. Even if you restart TelemFFB. But you told me there were duplicate gear and buffet settings in the window.

356thFS_Piranha•1/11/24, 11:28 PM

It doesn't stay off.

356thFS_Piranha•1/11/24, 11:31 PM

In the edit sim/class defaults there are two buffeting choices one with a value to selct same with movement, damage, deceleration, gear motion etc.

356thFS_Piranha•1/11/24, 11:32 PM

Not sure if I'm to select both or chose one to select?

Number481•1/11/24, 11:42 PM

In the offline/class editor view you see the on/off toggles for those individual settings which are not shown in the settings tab (but they should be). As well as the intensity values. The ones with the check boxes are toggles, the ones with the decimal values correspond to the sliders in the settings tab.

Number481•1/11/24, 11:44 PM

In the offline editor, you have to select the class you want (but no aircraft), select the default parameter you want to override, change the value and then hit apply....

356thFS_Piranha•1/11/24, 11:45 PM

You hit update? I don't see apply.

356thFS_Piranha•1/11/24, 11:45 PM

Thanks for the help bythe way

Number481•1/11/24, 11:48 PM

yes, the button says 'update value'.. if you don't hit that, nothing gets written to the file. It is not live changes like the sliders and checkboxes in the settings tab

356thFS_Piranha•1/11/24, 11:49 PM

OKAY

356thFS_Piranha•1/11/24, 11:50 PM

So under simulator if I whant all the effects listed do I check them all?

356thFS_Piranha•1/11/24, 11:50 PM

or leave them unchecked

356thFS_Piranha•1/11/24, 11:51 PM

I know it's a dumb question but the App is behaving or seems to be behaving strangely

356thFS_Piranha•1/11/24, 11:52 PM

I have read the manual multiple time but I'm still struggling with this.

356thFS_Piranha•1/11/24, 11:52 PM

sorry to be dense.

356thFS_Piranha•1/11/24, 11:54 PM

As I understand it the tabs under simulator effect class and model. Class affects all models and models are individual to the model

Number481•1/11/24, 11:55 PM

The top row shows you the default settings for any aircraft that matches the values selected in those boxes. So you just set the shake master default value to off for all IL2 prop aircraft. Setting the value at the aircraft category will only change the default value. You can still override it at the aircraft level.

356thFS_Piranha•1/11/24, 11:56 PM

So if i want all available effects do I just need to choose everything under model?

Number481•1/12/24, 12:01 AM

By default, there are very few aircraft that have default settings (in the default config only I can edit) that are different from the class defaults.

Any setting that is available for any aircraft will show when you have a specific aircraft selected (not all aircraft types in all sims have the same available settings)

Remember the left most checkbox is not an enable flag. It is only to enable the setting for editing in the right hand pane. Look at the value column to see what the current setting for any line item is.

356thFS_Piranha•1/12/24, 12:03 AM

OH!! that explains alot. The check box doesn't select. It only selects for editinh

356thFS_Piranha•1/12/24, 12:03 AM

editing

356thFS_Piranha•1/12/24, 12:06 AM

Even though the shaker master box was unselected the check box enabling it was selected , so it enitiated on every startup. Right

Number481•1/12/24, 12:10 AM

Yeah. Think of the left most checkbox as the override checkbox. By ticking it, you say that you want to override the setting from the default value. But, if you don't change the value in the right hand pane, it will remain the same as the default value.

Number481•1/12/24, 12:11 AM

BTW, if you do end up wanting to try those three shake effects in lieu of the default ones in IL2.. you can disable the IL2 shake here:

356thFS_Piranha•1/12/24, 12:11 AM

Okay much clearer

356thFS_Piranha•1/12/24, 12:12 AM

Yes I disabled there

Number481•1/12/24, 12:12 AM

OK.. then you can turn the ones in TelemFFB on (unless you don't like them

)

356thFS_Piranha•1/12/24, 12:14 AM

Thank You!!

356thFS_Piranha•1/12/24, 6:10 AM

Hey thank for the help.

356thFS_Piranha•1/12/24, 6:11 AM

Problem is that sometimes it works and sometime it doesn't at least thats the way it is for me with IL2.

Good evening! I had a question regarding order#587. I was invoiced and paid the order, and the ord

Similar Threads