Can you send me that patch again? I'll double check
Can you send me that patch again? I'll double check
AUnfortunately no patch
AIt got upstream 2 months ago
KOh, then all we need is that service?
KThat's easy, I'm happy to add that
AProbably better to pull the patch from the upstream kernel
AIt's part of Linux as of two months ago, see the Asus WMI history for it
KIf it's upstream and simply not in a released kernel then we should be getting 6.7 here within a week or two
AYep
A6.7 should also include the driver for the 323 IMU in the ally. But you still need patch 3 of the series to load it in the allu
APatches 4 and 5 might not be required for hhd but I have not checked
LHow do I update AMD drivers on Bazzite? If I get no signal from the previous driver should I not even update it? Im so confused. After bios screen and selecting which OS version of Bazzite to use, I kept getting no signal on my monitor and a black screen, so I added the nomodeset to the boot options and now I can enter the desktop.
KAMD drivers are built into the Linux kernel, there's nothing to update
KWhat GPU do you have?
LAMD RADEON RX 6800 XT
LIm not sure how to fix whatever is causing the issue so i can put the display mode back to normal
Lthe screen resolution while doing this is terrible
KSomething silly going on, I'm daily driving a 6900 XT without issue
LCould it be a desktop effect in system settings? If so I dont even know how to turn it off if I cant enter the desktop with normal boot options
Lis there a way to put stuff at default for screen resolution etc, for when i boot normally
Lwithout nomodeset
LI tried entering recovery mode with init=/bin/bash/ in grub boot settings, but it had the same issue as starting the desktop normally getting no signal again
LBasically I need to revert the KMS(for display) to default settings somehow, but I have no idea how to do so.
LMade a little summary here; Problem:
Was using desktop normally and had to reboot after desktop froze.
The monitor now gets no signal when attempting to boot into the OS.
I attempted to boot into a recovery mode and that also gets no signal.
Adding nomodeset in grub, allows me to boot into and access and use the desktop.
I'm using an AMD RX 6800 XT GPU.
Possible Solution Question:
How do you revert KMS Display Settings to default if you can only access the desktop with nomodeset? While in nomodeset I don't even see everything I had installed like desktop effects for instance, so I don't know how to remove them if I can't see them. I assume that if I were able to revert KMS display settings to default and save them, that next time I try to boot normally, I will be able to see the desktop again without getting no signal.
Was using desktop normally and had to reboot after desktop froze.
The monitor now gets no signal when attempting to boot into the OS.
I attempted to boot into a recovery mode and that also gets no signal.
Adding nomodeset in grub, allows me to boot into and access and use the desktop.
I'm using an AMD RX 6800 XT GPU.
Possible Solution Question:
How do you revert KMS Display Settings to default if you can only access the desktop with nomodeset? While in nomodeset I don't even see everything I had installed like desktop effects for instance, so I don't know how to remove them if I can't see them. I assume that if I were able to revert KMS display settings to default and save them, that next time I try to boot normally, I will be able to see the desktop again without getting no signal.
Twhen i get on the desktop ill link the draft. It's a public hackmd link. Need to improve it but you can have the link saved somewhere and do it whenever
PIs this something I need to worry about? Unsure if it meant run that now, or after the update has been applied.
Hehh you on a bios install? not uefi install?
PYeah I'm on bios install so that would make sense. Odd that it would notify me about that then...
Hit notifies you about it since bios install is really not expected as far as i know, it is not an expected install due to it being deprecated many years ago so there is no check in place if you are on a bios install or not.
Hbut yes @pure you can ignore the message since its only needed for secure boot
KOut of an abundance of caution it's notifying everyone
KWhen the next update launches next weekend that message will disappear for you and everyone else
KIt was the best way to make sure everyone was aware of it
KI suppose in your case it's also useful because you should not be using the bios mode regardless
M@Kyle Gospo is your Gamescope still built from source or did you also transition over to Chimera’s Gamescope-plus?
KChimera is slightly behind so I made a patch from their commits and applied it against the latest tagged upstream
KAnd that's what we build
Mgot it, thanks. using it as one final testing sample.
MI’m getting close to filing a Gamescope issue for this HDR nits issue totally separate from our refresh rate findings. Going to try one more Neptune kernel build and see if it makes a difference.
Vanilla Neptune seemed promising at first but then after one or two reboots my HDR metadata nits went back to half of what it should’ve been, leading me to believe it’s getting conflicting drm info somehow and then writing that as the new normal. I’m going to double check Bazzite’s output one more time to see if I overlooked anything.
Vanilla Neptune seemed promising at first but then after one or two reboots my HDR metadata nits went back to half of what it should’ve been, leading me to believe it’s getting conflicting drm info somehow and then writing that as the new normal. I’m going to double check Bazzite’s output one more time to see if I overlooked anything.
Munlike refresh rate if this one isn’t kernel dependent it seems in-scope of Valve issue reports
LI have a question about rebasing? Can I rebase without losing files?
Pyou'd want to
systemd should have a target for that, though, I think? every time a user logs in, execstart a script
that, or I just use cron, or monitor for filesystem changes--I have plenty of options, just have to see what the least overkill method would be
find -type d that chmod, but you've got the idea that I had if I did run it as a service, however, I'd also want to trigger it on loginsystemd should have a target for that, though, I think? every time a user logs in, execstart a script
that, or I just use cron, or monitor for filesystem changes--I have plenty of options, just have to see what the least overkill method would be
Hrebasing does not touch your $HOME folder (other than creating config files for new applications when you run the progam for the first time)
however it is strongly discouraged to change between KDE and Gnome due to the 2 separate desktop environments having conflicting configs so you risk getting an unusable userprofile
however it is strongly discouraged to change between KDE and Gnome due to the 2 separate desktop environments having conflicting configs so you risk getting an unusable userprofile
LThank you. I'm just putting my 1tb drive from my LCD onto my OLED. I'll be keeping KDE. I just wanna be on the testing branch for OLED & HDR.
Hthe stuff in testing is getting merged into main/stable next week btw
Bwhy would i need the
findno one else uses my computer but now im interested in setting this up 
FThere is:
if [ -d /sys/firmware/efi ]; then
if [ -d /sys/firmware/efi ]; then
FFor checking if you have UEFI
Felse
BIOS thing
BIOS thing
Fthis is used for Hide GRUB script
