Are there plans to integrate the two programs? As a noob i find it quite confusing how the settings

Are there plans to integrate the two programs? As a noob i find it quite confusing how the settings from the Configurator influence the Telem effects.

AAndre Are there plans to integrate the two programs? As a noob i find it quite confusi...

walmis•1/14/24, 12:24 PM

No, the scope of both programs is very different, so they will stay separate. Mostly the "volume" sliders in the configurator Settings tab affect the telem effects, but those will be available to control via telem too.

smitty•1/14/24, 3:04 PM

think of Configurator settings as allowed hardware maximums, and TelemFFB just reads game data and makes effects up to those maximums

Ssmitty think of Configurator settings as allowed hardware maximums, and TelemFFB just r...

Dudeman•1/14/24, 3:57 PM

How would you tune Configurator then? Just move all the sliders to 100%?

smitty•1/14/24, 3:59 PM

for spring, maybe yes. telem doesnt change inertia or friction though, so set them how you like.

AndreOP•1/14/24, 4:10 PM

So what effects are used by Telem? Spring, Constant, Damper?

walmis•1/14/24, 4:13 PM

Telem mainly generates various

Periodic

Periodic

rumble effects, some use

Constant

Constant

such as elevator droop effect,

Spring

Spring

- for dynamic spring forces in MSFS

Number481•1/14/24, 4:16 PM

you can also adjust dampening in some of the effects too... But as of today, the %s you set in TelemFFB are not equal to the slider %s in configurator. Rather, they are a % of whatever the slider in configurator is set to

AndreOP•1/14/24, 7:37 PM

Thank you!

Mack•1/14/24, 11:28 PM

Anyone use a virpl constellation grip on the boeing NLR sim seat? If so what size of extension do you use?

RAFFT•1/15/24, 12:12 AM

Hey guys I'm in need of your recommendations, Settings for DCS helicopters. Additionally, how I might set a force release button on my stick just like you would find in the UH60 and AH64.

RRAFFT Hey guys I'm in need of your recommendations, Settings for DCS helicopters. Addi...

JIGGAwest•1/15/24, 2:27 AM

are you having trouble with something specific? I did my inital setup with the VP Force configurator settings and running a stock config file for TelemFFB works fine for me. the force trim works with the binings in DCS. additionally you can override the force trim in dcs and have the VP Force configurator handle this.

spacebeaver380•1/15/24, 4:38 AM

!status

Sspacebeaver380 !status

VPforceBot•1/15/24, 4:38 AM

Hey @spacebeaver380,
So the last Shipped RHINO is #0342 on 2024-01-12
Average waiting time from preorder to shipped is 216 days, median is 228 days, max is 407 days
336 Rhinos are shipped in total

MMonkee The rudder movement on this bird is more akin to a jet than other helos or am I ...

原

原子力Hoshino•1/15/24, 9:57 AM

It looks like a reversed(?) pendular mechanism? To my knowledge lots of aircraft share this design, from GA to airliner, and helo; some fighter(F-14)/attacker(A-10) uses a pendular version similar to the TPR; the ones on newer fighter like 16 35? has very limited travel and requires strong force to operate and don't like any design in the consumer market(18 is also short travel+strong force but seems to be a different mechanism)https://forum.dcs.world/topic/215458-rudder-pedals-animation/?do=findComment&comment=5133172

The ones from virpil seem to be more RUS style; I'm not familiar with the mechanism used by MFG/WW, this is the only one I know one:https://forum.dcs.world/topic/159858-jet-provost-rudder-pedal-conversion/

ED Forums

rudder pedals animation

ED Forums

Jet provost rudder pedal conversion

Hi all thought I would share a little project I have taken on. Still waiting for delivery but should be here this week. A set of jet provost rudder pedals with toe brakes. I plan to use a Leobodnar board and hopefully hall sensors, but will take a closer look once it arrives. EDIT: Had to remove ...

VPforceBot•1/15/24, 10:50 AM

:package:

RHINO #0343 Has Shipped!

Jon (Bounty_V)•1/15/24, 12:51 PM

https://tenor.com/view/halo-elite-sangheili-halo4elite-gif-26688556

Tenor

Jon (Bounty_V)•1/15/24, 12:52 PM

there's like no good 343 gifs lol

omohat•1/15/24, 5:28 PM

Anyone used their Rhino in Star Wars Squadrons or another space sim? Just looking for ideas what the correct settings/profile should be

B34ker•1/15/24, 5:41 PM

I'd imagine for space you'd want fairly light resistance with a bit of light damping, plus a limited throw so your arm doesn't get tired from moving it around all over

Boggy•1/15/24, 8:19 PM

For those that fly the F5 in DCS , what are your settings for the ailerons/roll? It rolls faster than an A4 if you leave it as standard.

Stryker990•1/15/24, 10:16 PM

How long should i make the horizontal arm of a monstertech style centermounted deskmount with a rhino+WW f-16ex Combo (without extention) so i get good travel without bumping into the vertial beam?

Stoned Kakapo•1/15/24, 10:16 PM

trying to update vpforce config, but every time i click on the link, im hit with forbidden?

SStoned Kakapo trying to update vpforce config, but every time i click on the link, im hit with...

Number481•1/15/24, 10:44 PM

@walmis, looks like the main webserver is down.. can't get to main site or downloads via .com or .eu (order form link re-direct to google forms seems to be working).

hexpod•1/16/24, 12:54 AM

general•1/16/24, 1:09 AM

So I was looking into this and the kit, what does it come with? Like just a parts box and build it youself?

FlatSpin•1/16/24, 1:12 AM

control board and motors and grip adapters optional.

Hhexpod Click to see attachment

RAFFT•1/16/24, 1:39 AM

same

NNumber481 @walmis, looks like the main webserver is down.. can't get to main site or down...

walmis•1/16/24, 5:22 AM

Oh sh*t, slept through it. It's back online!

Wwalmis I'll provide kits with the necessary stuff to mount the FFB kit on the MFG. Only...

J2_NobiWan•1/16/24, 8:41 AM

patiently waiting, holding credit card in hand...

VPforceBot•1/16/24, 8:58 AM

:package:

RHINO #0344 Has Shipped!

VPforceBot•1/16/24, 9:58 AM

:package:

RHINO #0345 Has Shipped!

Wwalmis I'll provide kits with the necessary stuff to mount the FFB kit on the MFG. Only...

Stryker990•1/16/24, 9:59 AM

Aaaah shiii ima go bankrupt

JJ2_NobiWan patiently waiting, holding credit card in hand... 😅

Eraseri•1/16/24, 10:02 AM

Same

Stryker990•1/16/24, 10:05 AM

FFB throttle when?

Oomohat Anyone used their Rhino in Star Wars Squadrons or another space sim? Just lookin...

Dr. No•1/16/24, 10:28 AM

Elite Dangerous! There is a github for it and you can add effects.

Dr. No•1/16/24, 10:30 AM

For squadrons would have to find some telemetry and then have these guys teach you how to hook it up

SStryker990 FFB throttle when?

Don_prince (AJ) 📎📎📎•1/16/24, 11:07 AM

Im working on a haptic feedback trottle with bldc

VPforceBot•1/16/24, 12:24 PM

:package:

RHINO #0346 Has Shipped!

DDon_prince (AJ) 📎📎📎Im working on a haptic feedback trottle with bldc

原

原子力Hoshino•1/16/24, 1:59 PM

Does it also support auto throttle? For which platforms?

原原子力Hoshino Does it also support auto throttle? For which platforms?

Don_prince (AJ) 📎📎📎•1/16/24, 2:02 PM

Will support whatever you want to do with it, right now its early early stage and my initial focus is the nautical world

Don_prince (AJ) 📎📎📎•1/16/24, 2:03 PM

Its basically 3 smartknobs from Scott Bezz bodged together with I2C with ESP32-S3 instead of the Lilligo

VVPforceBot :package: 🇺🇸 **RHINO #0346** Has Shipped!

CaptFlushGarden (John Liberto)•1/16/24, 5:13 PM

YES!!!!!!!!!!!!!!!!!

Sunshine•1/16/24, 7:16 PM

Anyone use the Rhino or DIY kit with the F15E in DCS? How well does the Auto pilot work? I have the Brunner stick and the center is mushy enough to effect the AP.

MashedPotato•1/16/24, 9:47 PM

Autopilot in the F-15E seems kind of wonky in general this patch, it likes to follow the trim rather than holding altitude. When it was working though, it held true, followed courses, didn't get flipped to ATT mode out of NAV or HDG

TrigaNZ•1/16/24, 10:09 PM

I have found the A/P's to work better with little to no Friction or Damping or Inertia. In the AV8B and F/A-18 anyway.

Duchess ✈•1/16/24, 10:26 PM

Best way to get the TM F-18 grip at an angle without using an extension? Will the plug on the Rhino "move" or rotate a little?

Tayga•1/17/24, 1:33 AM

It hab arrived

SSunshine Anyone use the Rhino or DIY kit with the F15E in DCS? How well does the Auto pil...

Tinman•1/17/24, 8:48 AM

If you feel you've done all you can on the Rhino side, you can also add a slight deadzone in DCS axis. Used to do so in the FA18 but was able to dial in my settings in the Rhino software and removed the deadzone.

Strikkflypilot•1/17/24, 9:45 AM

How do I get off the order list?

DDuchess ✈Best way to get the TM F-18 grip at an angle without using an extension? Will t...

MichalK•1/17/24, 10:21 AM

There's no way to do that easily. When you order the Rhino, you can ask Walmis to have a custom joystick socket angle, like 20 degrees to the left.

Are there plans to integrate the two programs? As a noob i find it quite confusing how the settings

Similar Threads