Hi, I am wondering if will be possible to somehow know the force applied to the motor by the user an

Hi, I am wondering if will be possible to somehow know the force applied to the motor by the user and use it as a value (Force sensitive device) this could be great for use as in the F1-16 pedals.

PPickle_Surpr1se got the email that my order is coming up, should I get a throw limiter adapter? ...

Bob Bushman•1/17/24, 11:37 PM

I opted to skip the limiter, its also something you can have 3d printed close by anyways if you want.

And so far I dont feel the need for one still, as I'm not using an extension.

By stock the rhino behave as if it has about a 10cm extension compared to other gimbals.

Pickle_Surpr1se•1/17/24, 11:37 PM

Thanks for the help!

Duchess ✈•1/17/24, 11:40 PM

I have not felt the need for a limiter yet, but I will sure look for one sooner rather than later. Without an extension, the throw is quite good, but I have a part of my rig where the forward throw can bump into the rig itself.

Bob Bushman•1/17/24, 11:40 PM

One reason I opted to skip is i have an old 3d printer i could dust off and try out a few so i have options there.

DDuchess ✈I have not felt the need for a limiter yet, but I will sure look for one sooner ...

Bob Bushman•1/17/24, 11:42 PM

I used to have a font panel with cougar mfd's and the winwing panels, but I just removed it completely and I have no real idea how to get it up in a suitable fashion.

Duchess ✈•1/17/24, 11:54 PM

I have the TM panels plus a F-15E UFC.

CChunky Rat I’m going to be saving up my allowance for it can’t wait

PiNKSH!T•1/18/24, 6:14 AM

good work m8 keep at it, you won't regret it, it's the single best investment I made for flight sim'ing, the difference between this & something good running cams, springs & dampners etc. is imho even greater than the difference between one of those bases & a logitech 3d pro. Also if you fly heli's then again imo it's even more game changing, warbirds benefit the next most followed by fbw. Good luck with the saving & keep at it!

PPiNKSH!T good work m8 keep at it, you won't regret it, it's the single best investment I ...

Chunky Rat•1/18/24, 6:26 AM

Alright that’s the plan I finally got a good pc to run vr for once

Chunky Rat•1/18/24, 6:27 AM

Only problem is I use Hotas mounts on my desk I don’t think the huge base will support it

CChunky Rat Only problem is I use Hotas mounts on my desk I don’t think the huge base will s...

PiNKSH!T•1/18/24, 6:35 AM

ppl have used the desk mount by adding an additional bit that goes down to the floor to support the base

PiNKSH!T•1/18/24, 6:36 AM

just a piece or aluminium t profile that extends from the bottom of the base mount to the floor, taking up the etra weight

Chunky Rat•1/18/24, 6:39 AM

Should I hop on a waitlist I’ll probably buy it next Christmas cause it takes me a bit to get all that money

Chunky Rat•1/18/24, 6:39 AM

Hopefully lawn mowing pays well

Chunky Rat•1/18/24, 6:41 AM

Do you suggest getting the DIY build ? Is it hard?

CChunky Rat Do you suggest getting the DIY build ? Is it hard?

Eraseri•1/18/24, 8:24 AM

It all depends whether you can allocate time for it. Not hard but can be time consuming. You might need access to 3d printer too

VPforceBot•1/18/24, 9:03 AM

:package:

RHINO #0349 Has Shipped!

DDuchess ✈I have the TM panels plus a F-15E UFC.

Mike (Mugs)•1/18/24, 10:04 AM

What F-15 Ufc are you using

VPforceBot•1/18/24, 10:09 AM

:package:

RHINO #0350 Has Shipped!

IIcebeat Hi, I am wondering if will be possible to somehow know the force applied to the ...

Fierce_Fire•1/18/24, 12:11 PM

You can find the amperage to the motors in the configurator, but I'm pretty sure you'll have the same issues as people trying to make fss sticks

VVPforceBot :package: 🇵🇱 **RHINO #0350** Has Shipped!

YunacPL•1/18/24, 1:45 PM

Can't wait! Also I've noticed it will be a challenge to fit it into my chair

YunacPL•1/18/24, 1:46 PM

tarpoon•1/18/24, 1:52 PM

nice! have the same problem, using an Audi car seat myself. Might have to do some serious modding to it

YunacPL•1/18/24, 2:13 PM

The main issue is the length of the box and it will colide with chair support

YYunacPL Click to see attachment

Chunky Rat•1/18/24, 2:18 PM

https://tenor.com/view/star-wars-more-gif-21856591

Tenor

CChunky Rat https://tenor.com/view/star-wars-more-gif-21856591

YunacPL•1/18/24, 2:19 PM

"This time it will be the last bit..."

Chunky Rat•1/18/24, 2:19 PM

Must of costed my guess a Cessna 172

CChunky Rat Must of costed my guess a Cessna 172

YunacPL•1/18/24, 2:21 PM

Cost me only a good hobby time

Chunky Rat•1/18/24, 2:24 PM

Feed the addiction need a vr 4090

Chunky Rat•1/18/24, 2:26 PM

https://tenor.com/view/xrd-exrd-crypto-btc-eth-gif-23801255

Tenor

Chunky Rat•1/18/24, 2:26 PM

Winwing when they hear YunacPL

CChunky Rat Feed the addiction need a vr 4090

YunacPL•1/18/24, 2:40 PM

I own 2 VR headset but still prefer to chill with nothing on my head while flying

Bob Bushman•1/18/24, 2:43 PM

At this point I'm loathe to give up vr, but closer to buying a 50" oled and a delanclip than forking out for a 4090

MMike (Mugs)What F-15 Ufc are you using

Duchess ✈•1/18/24, 2:56 PM

It is the one off of Etsy… I cannot remember the exact name, but if you Google F-15E UFC Etsy it should come up. Works great for VR.

Aiva•1/18/24, 7:25 PM

Hi! To combine VPForce base with VKB MCG Ultimate grip is the VKB Black Box needed too?

Sunshine•1/18/24, 7:28 PM

4090? A great second choice is the 7900XTX. Think of it as a 4080 with 24GB, that's available at MSRP.

Sunshine•1/18/24, 7:28 PM

That's what I have

Sunshine•1/18/24, 7:28 PM

It's a good 50% faster than my 3080

Sunshine•1/18/24, 7:28 PM

in VR

Sunshine•1/18/24, 7:29 PM

No more driver issues with VR

AndyHill•1/18/24, 7:41 PM

yes the black box is needed

AndyHill•1/18/24, 7:42 PM

the vkb adapter is just a thing that connects the grip to the base physically and has a passthrough cable for the signal to go to the box

AAndyHill yes the black box is needed

Aiva•1/18/24, 7:43 PM

So you connect the combo with the PC with 2 USB cables. One for the base and one for the grip, Which is not the case for WinWinG and Virpil Grips! Many thanks.

Aiva•1/18/24, 7:59 PM

For the Winwing Grips would you recommend the use of Joystick Extension Rod (https://eu.winwingsim.com/view/goods-details.html?id=311) with the VPForce Base or not?

YYunacPL Click to see attachment

Ophelia•1/18/24, 8:47 PM

what is that throttle?

OOphelia what is that throttle?

YunacPL•1/18/24, 8:49 PM

Winwing orion 2 with f15EX grip plus my own hand made panel

Ophelia•1/18/24, 8:49 PM

that panel is amazing

YunacPL•1/18/24, 8:51 PM

Thanks it was my second build on arduino clone and mmjoy2

Duchess ✈•1/18/24, 10:01 PM

I would like a more F-16 centric panel to accompany my F-16 WW throttle, just have not found anything I like yet. Or better yet, I would love I if WW offered a more Air Force-centric style of equipment.

YYunacPL Click to see attachment

Stryker990•1/18/24, 10:22 PM

Damn full wso setup as well

SStryker990 Damn full wso setup as well ❤️

YunacPL•1/18/24, 10:22 PM

Wso and CPG

Hi, I am wondering if will be possible to somehow know the force applied to the motor by the user an

Similar Threads