Software Engineering Courses (SECourses)•2y ago

I want to create a space on my mac where i can install and run packages and experiment around but I

I want to create a space on my mac where i can install and run packages and experiment around but I should be able to delete this space/folder and after that none of what i did or installed during my experimentation should remain on my pc. how can I do this?

Bbert I want to create a space on my mac where i can install and run packages and expe...

Furkan Gözükara SECourses•1/21/24, 5:38 PM

sadly i dont know mac. but best would be installing a windows or linux on mac if possible

bertOP•1/21/24, 5:39 PM

does docker do this kind of thing

Bbert does docker do this kind of thing

Furkan Gözükara SECourses•1/21/24, 5:46 PM

are you able to run dockers on mac?

Furkan Gözükara SECourses•1/21/24, 5:46 PM

yes it would do

Furkan Gözükara SECourses•1/21/24, 5:47 PM

but it is important if docker will be able to use your bare metal hardware

ciphermonk•1/22/24, 7:41 PM

@Furkan Gözükara SECourses have you done a tutorial on stable video diffusion

ciphermonk•1/22/24, 7:42 PM

also comfi.ui?

Cciphermonk <@205854764540362752> have you done a tutorial on stable video diffusion

Furkan Gözükara SECourses•1/22/24, 11:11 PM

not yet but will do hopefully

Furkan Gözükara SECourses•1/22/24, 11:11 PM

so many stuff recently

Partha•1/25/24, 3:56 PM

Is anyone online?

PPartha Is anyone online?

Furkan Gözükara SECourses•1/25/24, 6:24 PM

yes

Dazzastrous [4090]•1/26/24, 1:58 PM

https://huggingface.co/spaces/HumanAIGC/OutfitAnyone This shows much promise impressive

OutfitAnyone - a Hugging Face Space by HumanAIGC

DDazzastrous [4090]https://huggingface.co/spaces/HumanAIGC/OutfitAnyone This shows much promise i...

Furkan Gözükara SECourses•1/26/24, 10:24 PM

i agree

DDazzastrous [4090]https://huggingface.co/spaces/HumanAIGC/OutfitAnyone This shows much promise i...

EyeSpyBekoAI•1/27/24, 7:17 PM

very interesting. Is it stable diffusion based? The fact that they only allow the preset model images to be put in there makes me think there is a pre-prepared controlnet going on but it is very smooth none the less. Thanks for sharing.

EEyeSpyBekoAI very interesting. Is it stable diffusion based? The fact that they only allow th...

Dazzastrous [4090]•1/29/24, 2:45 PM

Original message was deleted

Sipriyani•1/30/24, 12:42 AM

im from NJ. what exactly you need?

Tthawadioo OK thank you i will test it 🌹

Chip•1/30/24, 3:40 AM

did you test it? What was your result?

Jillani SoftTech•2/1/24, 3:31 AM

Hey Everyone today I am recently sharing my new updated blog post please check and share your feedback.
https://jillanisofttech.medium.com/redefining-excellence-in-mlops-a-guide-to-optimal-machine-learning-experimentation-environments-0c4ab61905d1

ai

Medium

Redefining Excellence in MLOps: A Guide to Optimal Machine Learning...

Muhammad Ghulam Jillani(Jillani SoftTech), Senior Data Scientist and Machine Learning Engineer

JJillani SoftTech Hey Everyone today I am recently sharing my new updated blog post please check a...

Furkan Gözükara SECourses•2/1/24, 10:53 AM

nice thanks

Evan•2/2/24, 3:14 AM

Hey everyone! After doing a lot of work in the generative AI space I want to start investing in training an LLM to process input - like a chatbot as an example

Evan•2/2/24, 3:14 AM

Any good videos/articles on how to train my own?

EEvan Hey everyone! After doing a lot of work in the generative AI space I want to sta...

Furkan Gözükara SECourses•2/2/24, 9:13 AM

this is a good topic. sadly i couldnt find time yet

FFurkan Gözükara SECourses this is a good topic. sadly i couldnt find time yet

Evan•2/2/24, 9:18 PM

will report back, i did find this which claims to be the automatic 1111 UI for text models: https://github.com/oobabooga/text-generation-webui

GitHub

GitHub - oobabooga/text-generation-webui: A Gradio web UI for Large...

A Gradio web UI for Large Language Models. Supports transformers, GPTQ, AWQ, EXL2, llama.cpp (GGUF), Llama models. - GitHub - oobabooga/text-generation-webui: A Gradio web UI for Large Language Mod...

KaanCan•2/4/24, 4:57 PM

Hello, I want to replace my AMD graphics card with an Nvidia graphics card for stable diffusion. I wanted to buy a 3080, but since my PSU is 600W, the healthiest and newest generation card I can go for is RTX 4060, but with 8GB VRAM, I'm not sure if it's sufficient for stable diffusion. Therefore, I'm torn between 3060 12GB and 4060 due to VRAM, as I don't have any other alternatives due to my PSU

KKaanCan Hello, I want to replace my AMD graphics card with an Nvidia graphics card for s...

Furkan Gözükara SECourses•2/4/24, 5:49 PM

try to go as much as possible VRAM

Furkan Gözükara SECourses•2/4/24, 5:49 PM

if your 600 watt is real

Furkan Gözükara SECourses•2/4/24, 5:49 PM

you can go with RTX 3090 too

Furkan Gözükara SECourses•2/4/24, 5:49 PM

at worst you can do some undervoltage

KaanCan•2/4/24, 6:01 PM

I consulted with my friend, and he also advised me to upgrade to a 3080 and change the PSU later, which didn't seem unreasonable. However, I'm concerned about the inadequacy of the PSU causing damage to other components in the system.

KKaanCan I consulted with my friend, and he also advised me to upgrade to a 3080 and chan...

Furkan Gözükara SECourses•2/4/24, 6:10 PM

i think it would just shut down pc

FFurkan Gözükara SECourses i think it would just shut down pc

KaanCan•2/4/24, 6:16 PM

Everyone I asked recommended getting the 3080, and if you also approve, then it would be best for me to go with the 3080

KKaanCan Everyone I asked recommended getting the 3080, and if you also approve, then it ...

Furkan Gözükara SECourses•2/4/24, 6:17 PM

how much vram it has?

FFurkan Gözükara SECourses how much vram it has?

KaanCan•2/4/24, 6:18 PM

10gb

KKaanCan 10gb

Furkan Gözükara SECourses•2/4/24, 6:18 PM

i would buy RTX 4060 - 16 GB

Furkan Gözükara SECourses•2/4/24, 6:18 PM

much better

Furkan Gözükara SECourses•2/4/24, 6:18 PM

look for it

FFurkan Gözükara SECourses i would buy RTX 4060 - 16 GB

KaanCan•2/4/24, 6:20 PM

I can't buy anything within my budget except 3080

KKaanCan I can't buy anything within my budget except 3080

Furkan Gözükara SECourses•2/4/24, 6:22 PM

i see

Furkan Gözükara SECourses•2/4/24, 6:22 PM

maybe used card?

KKaanCan Hello, I want to replace my AMD graphics card with an Nvidia graphics card for s...

ShaDeRzz•2/4/24, 11:46 PM

What video card do you have now? I have AMD RX 6800XT 16gb and it handles Lora's training and stable diffusion quite well. The only inconvenience is that I had to install Ubuntu 20.04 on a second disk in order to have hardware acceleration

SShaDeRzz What video card do you have now? I have AMD RX 6800XT 16gb and it handles Lora's...

Furkan Gözükara SECourses•2/5/24, 12:15 AM

what are your second / it speed per iteration speed

Jillani SoftTech•2/5/24, 5:13 AM

Hey Everyone today I am recently sharing my new updated blog post please check and share your feedback.

https://jillanisofttech.medium.com/revolutionizing-llms-with-rag-navigating-the-new-frontier-in-ai-knowledge-and-trust-1b68fc3b53ec
ai

Medium

Revolutionizing LLMs with RAG: Navigating the New Frontier in AI Kn...

Muhammad Ghulam Jillani(Jillani SoftTech), Senior Data Scientist and Machine Learning Engineer

SShaDeRzz What video card do you have now? I have AMD RX 6800XT 16gb and it handles Lora's...

KaanCan•2/5/24, 9:52 AM

I use rx6600 and my operating system is Linux but I had to use it with docker because it was arch linux. When I installed stable diffusion directly to the system, it did not recognise the video card and worked with the processor. Somehow I managed to run stable diffusion with the video card using docker, but this time 512x512 20 step outputs took 60-90 seconds and after 4-5 outputs, the photos were distorted. Even when I tried with a proper seed and prompt, I kept getting corrupted outputs, and I was getting a 'cuda out of memory' error at the slightest setting change. I thought these speeds were normal, until I talked to someone using stable diffusion with a 3050 mobile graphics card who mentioned that he was getting outputs between 2-5 seconds. That's when I decided that I should definitely switch to NVIDIA.

JJillani SoftTech Hey Everyone today I am recently sharing my new updated blog post please check a...

Furkan Gözükara SECourses•2/5/24, 10:54 AM

nice thanks

KKaanCan I use rx6600 and my operating system is Linux but I had to use it with docker be...

Furkan Gözükara SECourses•2/5/24, 10:54 AM

true don't waste time with AMD if you are into AI

Dazzastrous [4090]•2/6/24, 10:49 PM

https://anythinginanyscene.github.io/?ref=aiartweekly#paper-outdoor-results

Anything in Any Scene

Photorealistic Video Object Insertion

mikemenders•2/7/24, 2:39 PM

Isn't there a decent, AI, melody generator that can be used offline and the music will have a beginning and an end? Online services have a bunch, and Wondershare already gives you one for Filmora, but no such thing for offline use? The Audiocraft/MusicGen/Magnet line is forgettable, a disaster what it generates.

Mmikemenders Isn't there a decent, AI, melody generator that can be used offline and the musi...

Furkan Gözükara SECourses•2/7/24, 10:53 PM

we have auto installers for audiocraft plus

Furkan Gözükara SECourses•2/7/24, 10:53 PM

you tried it?

Furkan Gözükara SECourses•2/7/24, 10:54 PM

https://www.patreon.com/posts/ai-music-auto-84334460

Patreon

Auto Installer For AudioCraft Plus - MusicGen - AudioGen - An All-i...

Patreon is empowering a new generation of creators.
Support and engage with artists and creators as they live out their passions!

I want to create a space on my mac where i can install and run packages and experiment around but I

Similar Threads