I had this, but I fixed it, sorry I can’t recall how, but it was easy.
I had this, but I fixed it, sorry I can’t recall how, but it was easy.
GHow are the joysticks connected to the rhino? are they custom built or are it is compatible with ones built by thrustmaster for example
BYou mean the grips ?
If so yeah, same connector as the thrustmasters or virpil grips.
If so yeah, same connector as the thrustmasters or virpil grips.
Aadapters available for vkb (not the latest gen yet?) and winwing
MI just bought the COWS DA-42 for MSFS, but not having any luck at all trying to get the ailerons/elevator axis to be controlled by TelemFFB. It jumps between actual stick position and centered many times per second, as if there is a conflicting input - but I have nothing else assigned to those axis. It works fine in every other plane. Very odd. I don't think they are using a custom simconnect variable, but how could I find out?
NI dont have the aircraft but I see this on their discord. The probably has the info you need.
Nlook at the document as specified for setting up SPAD/FSUIPC.. will have the same L:var info you need for TelemFFB
MWow! Thanks for the amazingly fast response. I will check out that info and post an update back here.
CHi guys, I’m currently on the waiting list and with the current numbers it’s looking like I may get invoiced around June / July. Sadly my car has just cost me all my savings, after it broke down. Does anyone know if there is a way I can request my order get delayed until later on In the year, ( October / November ish ) to allow me to save up again?
DSuper, super excited to hear the blurb about “FFB” in the latest z Heatblur F-4E video.
RI'll try the special code from Number481. Thanks anyway though!
Phey m8, I'd talk to walmis maybe he can swap your #SN with a later one?
C@PiNKMuD hey there, ok thanks for that I’ll send him a PM
![SR-F_Winger_[73]_David](https://cdn.discordapp.com/avatars/98037306870472704/f924b51d2e4486c1eb873c2f4fb7f6a3.webp?size=40)
Sthanks mate. This one doesnt fit all too well. I constructed one for the DIY i used wich is designed to simply be put in place with doublesided tape.
Sdidnt try em out yet. but currently printing.
Sfor anyone who also needs some cause of curious cats or babies that crawl around
Sprobably this should rather go to DIY-forum? Apologies if so.
![SR-F_Winger_[73]_David](https://cdn.discordapp.com/avatars/98037306870472704/f924b51d2e4486c1eb873c2f4fb7f6a3.webp?size=16)
WYou can make a new thread in #
knowledge-base
knowledge-base
SOK, will do. thanks!
V:package: 
RHINO #0418 Has Shipped!
RHINO #0418 Has Shipped!V:package: 
RHINO #0419 Has Shipped!
RHINO #0419 Has Shipped!
GCan around advise how I get rid of this popping up as once it does I can't click on it or remove it in anyway.
WIf you make chrome or brave default browser it should override this one, Edge has some kind of bug that you cannot close it
GI use forefox as my default browser, don't really want to change that
Wor disable WebUSB device detection: about://flags/#enable-webusb-device-detection
GI'll try that again as I did disable it but it dodn't change anything 
V:package: 
RHINO #0420 Has Shipped!
RHINO #0420 Has Shipped!
Sthese are working for me in the COWS DA42's
MYes agreed. Tested tonight. I did try the manual scaling as the lvar was listed as +-100% but the correct scale is +-1 as you show there.
V:package: RHINO #0421 Has Shipped!
RHINO #0421 Has Shipped!V:package: 
RHINO #0422 Has Shipped!
RHINO #0422 Has Shipped!
V@walmis the bot /info command is not working at the moment...just to tell you
CHas anyone figured out how to get FFB to give vibrations and such in helicopters in DCS?
Edit nvm
Edit nvm
WTry again
VFixed
V:package: 
RHINO #0423 Has Shipped!
RHINO #0423 Has Shipped!
KThat’s me!! It’s arrived already so fully pumped to get started on it!
Csorry for late reply, I bought a fairly expensive warthog extension on ebay, and used the bottom cap to screw it onto the rhino and bought a 45 degree aluminum tube and cut it to size and ran the wire through a hole in the front
V:package: RHINO #0424 Has Shipped!
RHINO #0424 Has Shipped!V:package: 
RHINO #0425 Has Shipped!
RHINO #0425 Has Shipped!V:package: RHINO #0426 Has Shipped!
RHINO #0426 Has Shipped!
SHey chaps - design im building specifies an APS5063 motor but I was planning on buying the 57BLF03 and board from the site. Does anyone know what the difference between these two are? Will I need to compensate elsewhere in terms of gearing?
FI think you'll need to find a new design cause the 2 are very different
FWait this is 86blf04
FDavitu DC Motor - ACT Motor Brushless DC Motor 57BLF03 24V 188W 3000RPM 3Phase Single Shaft CNC Router
FThat has spec in description
FAlien Power System
APS 5065 Outrunner brushless motor 60KV 1800W
FCompare the 2 and you'll notice they're very different
SI think i might be ok @Fierce_Fire - I'm using this design (https://github.com/farm/bldc-ffb-joystick-base/tree/main) which states APS5065 in the readme but models the 57BLF03. Just concerned about belt length now. 
GitHub
CAD files for force feedback joystick base. Contribute to farm/bldc-ffb-joystick-base development by creating an account on GitHub.
SHas anyone built this before?
M!status
