VPforce Controls•2y ago

I dont have the aircraft but I see this on their discord. The probably has the info you need.

Number481OP•2/26/24, 11:37 PM

look at the document as specified for setting up SPAD/FSUIPC.. will have the same L:var info you need for TelemFFB

NNumber481 I dont have the aircraft but I see this on their discord. The probably has the ...

MGBDave•2/26/24, 11:49 PM

Wow! Thanks for the amazingly fast response. I will check out that info and post an update back here.

Cowboy10uk•2/27/24, 1:02 AM

Hi guys, I’m currently on the waiting list and with the current numbers it’s looking like I may get invoiced around June / July. Sadly my car has just cost me all my savings, after it broke down. Does anyone know if there is a way I can request my order get delayed until later on In the year, ( October / November ish ) to allow me to save up again?

Duchess ✈•2/27/24, 1:47 AM

Super, super excited to hear the blurb about “FFB” in the latest z Heatblur F-4E video.

TTrigaNZ I had this, but I fixed it, sorry I can’t recall how, but it was easy.

R7-Cedar•2/27/24, 3:02 AM

I'll try the special code from Number481. Thanks anyway though!

CCowboy10uk Hi guys, I’m currently on the waiting list and with the current numbers it’s loo...

PiNKSH!T•2/27/24, 3:11 AM

hey m8, I'd talk to walmis maybe he can swap your #SN with a later one?

Cowboy10uk•2/27/24, 3:18 AM

@PiNKMuD hey there, ok thanks for that I’ll send him a PM

Mmechsicko https://discord.com/channels/965234441511383080/1169287017268531225/116928721465...

SR-F_Winger_[73]_David•2/27/24, 12:52 PM

thanks mate. This one doesnt fit all too well. I constructed one for the DIY i used wich is designed to simply be put in place with doublesided tape.

SR-F_Winger_[73]_David•2/27/24, 12:53 PM

didnt try em out yet. but currently printing.

Bildschirmfoto_2024-02-27_um_11.53.26.png

X-Cover.stl75.96KB

Y-Cover.stl64.68KB

SR-F_Winger_[73]_David•2/27/24, 12:53 PM

for anyone who also needs some cause of curious cats or babies that crawl around

SR-F_Winger_[73]_David•2/27/24, 12:55 PM

probably this should rather go to DIY-forum? Apologies if so.

SSR-F_Winger_[73]_David probably this should rather go to DIY-forum? Apologies if so.

walmis•2/27/24, 1:15 PM

You can make a new thread in #

knowledge-base

Wwalmis You can make a new thread in #📙knowledge-base

SR-F_Winger_[73]_David•2/27/24, 1:34 PM

OK, will do. thanks!

VPforceBot•2/27/24, 1:53 PM

:package:

RHINO #0418 Has Shipped!

VPforceBot•2/27/24, 1:53 PM

:package:

RHINO #0419 Has Shipped!

Glaive(Rikk)•2/27/24, 1:56 PM

Can around advise how I get rid of this popping up as once it does I can't click on it or remove it in anyway.

GGlaive(Rikk)Can around advise how I get rid of this popping up as once it does I can't click...

walmis•2/27/24, 1:59 PM

If you make chrome or brave default browser it should override this one, Edge has some kind of bug that you cannot close it

Glaive(Rikk)•2/27/24, 2:00 PM

I use forefox as my default browser, don't really want to change that

walmis•2/27/24, 2:00 PM

or disable WebUSB device detection: about://flags/#enable-webusb-device-detection

Glaive(Rikk)•2/27/24, 2:00 PM

I'll try that again as I did disable it but it dodn't change anything

VPforceBot•2/27/24, 2:43 PM

:package:

RHINO #0420 Has Shipped!

MMGBDave I just bought the COWS DA-42 for MSFS, but not having any luck at all trying to ...

smitty•2/28/24, 2:50 AM

these are working for me in the COWS DA42's

MGBDave•2/28/24, 3:04 AM

Yes agreed. Tested tonight. I did try the manual scaling as the lvar was listed as +-100% but the correct scale is +-1 as you show there.

VPforceBot•2/28/24, 9:07 AM

:package:

RHINO #0421 Has Shipped!

VPforceBot•2/28/24, 1:24 PM

:package:

RHINO #0422 Has Shipped!

Virus•2/28/24, 1:55 PM

@walmis the bot /info command is not working at the moment...just to tell you

CaiJ•2/28/24, 1:56 PM

Has anyone figured out how to get FFB to give vibrations and such in helicopters in DCS?

Edit nvm

VVirus @walmis the bot /info command is not working at the moment...just to tell you

walmis•2/28/24, 1:56 PM

Try again

Virus•2/28/24, 1:57 PM

Fixed

VPforceBot•2/28/24, 3:30 PM

:package:

RHINO #0423 Has Shipped!

VVPforceBot :package: 🇧🇪 **RHINO #0422** Has Shipped!

Knuck👨✈•2/28/24, 5:46 PM

That’s me!! It’s arrived already so fully pumped to get started on it!

Bblave549 I might've missed earlier discussion about this, but (a) what grip is that and (...

CaptFlushGarden (John Liberto)•2/28/24, 5:47 PM

sorry for late reply, I bought a fairly expensive warthog extension on ebay, and used the bottom cap to screw it onto the rhino and bought a 45 degree aluminum tube and cut it to size and ran the wire through a hole in the front

VPforceBot•2/29/24, 9:33 AM

:package:

RHINO #0424 Has Shipped!

VPforceBot•2/29/24, 10:03 AM

:package:

RHINO #0425 Has Shipped!

VPforceBot•2/29/24, 10:18 AM

:package:

RHINO #0426 Has Shipped!

Swoop•2/29/24, 12:57 PM

Hey chaps - design im building specifies an APS5063 motor but I was planning on buying the 57BLF03 and board from the site. Does anyone know what the difference between these two are? Will I need to compensate elsewhere in terms of gearing?

Fierce_Fire•2/29/24, 1:22 PM

I think you'll need to find a new design cause the 2 are very different

Fierce_Fire•2/29/24, 1:22 PM

Wait this is 86blf04

Fierce_Fire•2/29/24, 1:24 PM

https://www.amazon.com/Davitu-DC-Motor-Brushless-57BLF03/dp/B09FY6NZRT

Davitu DC Motor - ACT Motor Brushless DC Motor 57BLF03 24V 188W 300...

Davitu DC Motor - ACT Motor Brushless DC Motor 57BLF03 24V 188W 3000RPM 3Phase Single Shaft CNC Router

Fierce_Fire•2/29/24, 1:24 PM

That has spec in description

Fierce_Fire•2/29/24, 1:25 PM

https://alienpowersystem.com/shop/brushless-motors/50mm/aps-5065-outrunner-brushless-motor-60kv-1800w/

Alien Power System

APS 5065 Outrunner brushless motor 60KV 1800W

Fierce_Fire•2/29/24, 1:26 PM

Compare the 2 and you'll notice they're very different

Swoop•2/29/24, 1:54 PM

I think i might be ok @Fierce_Fire - I'm using this design (https://github.com/farm/bldc-ffb-joystick-base/tree/main) which states APS5065 in the readme but models the 57BLF03. Just concerned about belt length now.

GitHub

GitHub - farm/bldc-ffb-joystick-base: CAD files for force feedback ...

CAD files for force feedback joystick base. Contribute to farm/bldc-ffb-joystick-base development by creating an account on GitHub.

Swoop•2/29/24, 2:13 PM

Has anyone built this before?

Mach_Point_Yuh•2/29/24, 7:35 PM

!status

MMach_Point_Yuh !status

VPforceBot•2/29/24, 7:35 PM

Hey @Mach_Point_Yuh,
So the last Shipped RHINO is #0424 on 2024-02-29
Average waiting time from preorder to shipped is 213 days, median is 222 days, max is 436 days
420 Rhinos are shipped in total

AndyHill•2/29/24, 8:03 PM

who is the lucky dude(tte) at 436?

Fr4Ged•2/29/24, 8:13 PM

yeah, how does that even happen? missed the e-mail?

MashedPotato•2/29/24, 9:58 PM

Missed the email would mean the order got canceled, no? Maybe it was like the very first pre-order, and the mass of production lately has brought the average and median way the fuck down

Piola•2/29/24, 10:00 PM

!status

I dont have the aircraft but I see this on their discord. The probably has the info you need.

Similar Threads

Similar Threads

Similar Threads