Yes, axis curves and FFB do not get along at all.
Yes, axis curves and FFB do not get along at all.
V:package: 
RHINO #0458 Has Shipped!
RHINO #0458 Has Shipped!V:package: 
RHINO #0459 Has Shipped!
RHINO #0459 Has Shipped!![SR-F_Winger_[73]_David](https://cdn.discordapp.com/avatars/98037306870472704/f924b51d2e4486c1eb873c2f4fb7f6a3.webp?size=40)
SSelling a VPForce Rhino DIY Base. PM if interested. SOLD!
![SR-F_Winger_[73]_David](https://cdn.discordapp.com/avatars/98037306870472704/f924b51d2e4486c1eb873c2f4fb7f6a3.webp?size=16)
PLooks great! Plan on making more?
SI am not a competitor to Walmis. PM me if youre interested.
SFYI i asked him if its fine to offer a base here. @walmis if you change mind let me know and ill take it off
Mso for the apache reset the curves and its feeling much better! with the force trim now working (confirmed by keeping the joystick position box open on the monitor next to me - just wondering how I can bring up the DCS joystick position monitor in game?) - only issue I had was when I then moved onto test some fixed wing aircraft (p51 and spitfire) the stick centre seemed off, the stick sometime drifted down and ffb on the aircraft didn't feel right (note I corrected the DCS curve on these aircraft vut didnt seem to help) also tried restarting the software and something still didnt feel right in the FFB - didnt have time to test but guessing it might be necessary to power down the base between flights (to reset everything) or might these planes need completely different settings in the VPforce software for the FFB to feel right?
WCenter drift is normal on non-FBW aircraft, for example F-14 center pos noticeably drifts with AoA and different airspeed
WThere's no need to restart the base on every flight, DCS does a good job of resetting it's effects
FRCtrl+Enter is the command to display the joystick position in game
SCurves are broken in dcs, they dont apply to ffb so the position mismatch. Also you should have enough precision to avoid curves if you use a stick extension
SCenter will drift depending on triming and wind. When you have high airspeed Centering should strengthen to trim position.
Tis there an equivalent curves setting for the stick outside of dcs?
Tor more importantly for me, the saturation level
Fyou can set something akin to curves in the software
Fbut personally ive never used it
SYes, there should be for normal axis. Or ffb the software of your stick needs to support it but in theory with high end stick like the rhino, laserwing or ffbeast the curves are unnecessary
Tcool. I dont use curves, but I do reduce the saturation on the gazelle and AH64 just to give me a bitmore finesse
SAh, so you limit travel?
TYeah
TI dont need full deflection really
SThats kind of like similar but instead of altering the axis linearity you alter the deflection
Ffor helis ffb changes the game entirely
Fdont really need a curve at all
SOr even saturation
Tthats what Im hoping 
Tim running a CM3 base with no springs and clutch, works well but Im sure the Rhino will be better
SYeah hehe
SAre you running the cm3 with extension
SAnd is the stick positioned just above your legs
SFFB helps but having good ergonomics helps way more
Fdont worry, it is. Havent used the cm3 so cant comment on the feel personally but heard the rhino is better, and actual ffb trim is amazing
Trunning the 20cm extension with the T50, it sits a little bit too high
SWhere does it sit
Tbetween my legs, but my arm doesnt rest on my leg, so I think its a bit too high. its perfectly comfortable, but I'd prefer it a little lower
SYou should be able to rest your wrist on your legs while flyng and just control the stick with finger tips
SIts really important. Not only stopping your hand from tiring and leaning on the stick but to give it a reference point. Its a lot harder to control your whole arm precisely in air then it is a small portion of your hand
TAye, Im sure it'll make things a lot more precise
TI've held off fixing it til now. Next up is a DOF reality H3 !
SJeez
Tmight need to wait tho
SIsnt it more simple to configure the stick properly
TI'm sure it is
DQuick question can I mount the directly to my simrig floor?, I got a Simlab GT1 EVO with optional metal floor.
Fits has a few mounting holes on the bottom
Fso if you have a drill, probably
Fif not youll have to use the #
faq to see if the holes line up
faq to see if the holes line up
Mthanks - note your comments so with something like the spitfire or the p51 I should see some noticeable centre position drift - note I had seen this but assumed flying the ah64 just before (with the force trim) may have somehow reset or messed up the centre - so I am guessing after reading reply as I load a new aircraft the centre (initially) should go back to the old calibrated centre (from the VPforce software but may drift as you fly? - also noticed on the p51 and spitfire the ffb didnt feel right (like when the apache had the curves applied even though I had reset all the curves!) - to correct this guessing the best way is just to tweak the VPforce configurator software settings? - if yes are they any particular settings I might need for helicopters (apache now feels good!) but that might not be required for fixed wing?
Malso unrelated question - currently using a virpil z with the mongoose grip but tempted to try the thrustmaster f18 grip instead - has anyone tried this and is it a worthwhile change?( just concerned it might not work as well as the mongoose - while the f18 is a better grip (all metal) its also much heavier so unsure how it might effect the performance of the rhino)
II went up 40 places in 1 day. 46 more to go boys! Almost there!