Yeah it is! A classic ZYNQ based board. You can also look at PYNQ-Z2 https://in.element14.com/tul-co

Yeah it is! A classic ZYNQ based board. You can also look at PYNQ-Z2 https://in.element14.com/tul-corporation/1m1-m000127dvb/basic-kit-32bit-arm-cortex-a9/dp/2913032

NNavadeep Yeah it is! A classic ZYNQ based board. You can also look at PYNQ-Z2 https://in....

gKarthikSai•4/5/24, 2:20 AM

Ok....what's the difference between z7 and z2 ?

NavadeepOP•4/5/24, 2:25 AM

Both are from different vendors. Arty Z7-20 and PYNQ-Z2 has the same ZYNQ XC7Z020-1CLG400C part although.
Onboard peripherals, availability and cost will be your to-look factors.
(note: Arty Z7 comes in -10 and -20 variants and these two have different SoC variants)

Saßì•4/5/24, 3:52 AM

@Karl's Biggest Fan Welcome! We're glad you're here. Could you introduce yourself and tell us about your profession?

onky•4/5/24, 4:25 AM

See you at EW. I hope you get some time to visit our booth ADlink Technology. Hall-3 stand 147 we are showcasing our latest products in edge computing.

Chimmuanya Okere•4/5/24, 6:24 AM

What's the major difference between a blind via and a buried via in a PCB design. And when it's it good to use it in a design other than using a through hole via @PCB & Analog

CChimmuanya Okere What's the major difference between a blind via and a buried via in a PCB design...

gKarthikSai•4/5/24, 6:30 AM

Blind via is where the board is not drilled throughout

gKarthikSai•4/5/24, 6:30 AM

gKarthikSai•4/5/24, 6:31 AM

You can go for them in a bga package if you want to lower the layercount

gKarthikSai•4/5/24, 6:32 AM

But it is a tradeoff between redusing the layers or using blind and burried cause they are expensive to manufacture and most manufacturers don't support blinds and burrieds

GgKarthikSai But it is a tradeoff between redusing the layers or using blind and burried caus...

Joseph Ogbonna•4/5/24, 6:38 AM

Sometimes using microvias reduces the cost of your PCB board. According to Happy Holden (aka, God Father of HDI), before using this you should plan for it in your stackup and throughout your design. It can reduce the total cost and layers of your board if planned appropriate.

GgKarthikSai But it is a tradeoff between redusing the layers or using blind and burried caus...

Joseph Ogbonna•4/5/24, 6:40 AM

But it's more useful in sophisticated designs that uses bga. Using this also helps for better Signal Integrity in your board.

Oonky See you at EW. I hope you get some time to visit our booth ADlink Technology. Ha...

techielew•4/5/24, 6:57 AM

I know where you are already

I'm scheduled to be there on Wednesday afternoon to meet with Richard.

Ttechielew I know where you are already 🙂 I'm scheduled to be there on Wednesday afternoon...

onky•4/5/24, 7:35 AM

Great. We can meet. I will be on booth duty to tech support to our sales team. See you there.

techielew•4/5/24, 8:05 AM

What’s your worst experience with an IoT device?

devheads-feedEngine check notification does not provide any value!

LEGIT•4/5/24, 9:38 AM

Need help guys

LEGIT•4/5/24, 9:38 AM

Anyone here

LEGIT•4/5/24, 9:39 AM

@Mod @FW Lead

LLEGIT Need help guys

aymen ammari•4/5/24, 9:42 AM

aymen ammari•4/5/24, 9:43 AM

What I can help with

LEGIT•4/5/24, 9:43 AM

Iot

LEGIT•4/5/24, 9:43 AM

Im in middle of hackathon

LEGIT•4/5/24, 9:43 AM

@aymen ammari

aymen ammari•4/5/24, 9:44 AM

@Marvee Amasi

aymen ammari•4/5/24, 9:44 AM

He can help you alot

Saßì•4/5/24, 10:54 AM

@LEGIT Welcome! We're glad you're here. Could you introduce yourself and tell us about your profession?

Saßì•4/5/24, 11:32 AM

Friendly reminder about Upcoming Event
Save the Time & Get Ready

https://discord.com/invite/5cu3UzXn?event=1224832746271150194

mixedgreens•4/5/24, 12:49 PM

Question for the chat: I am applied math/cs major starting a career out in IoT. I really like this field and think it is going to become a passion of mine. I am looking for a mentor to help guide me and just chat about the field, etc. Would anyone be interested in this? I am in Chicago. : )

techielew•4/5/24, 1:11 PM

What specifically are you looking to focus on? Start with HW vs SW

Ttechielew What specifically are you looking to focus on? Start with HW vs SW

mixedgreens•4/5/24, 1:26 PM

Software in particular. I also like learning about market relevance/commercialization potential of IoT. I still wouldn't mind learning the basics of the hardware side.

Petr Dvořák•4/5/24, 2:06 PM

@techielew It looks like daylight saving change in my timezone moved the Office Hours to one-hour later time. Is it possible?

techielew•4/5/24, 2:16 PM

Hey Petr, I have been looking at this too. However for me it says it’s in 45 minutes.

techielew•4/5/24, 2:17 PM

I’m going by the Discord server event time since everyone’s time zones shifted

youcef_ali•4/5/24, 2:55 PM

Is it possible to do ota update with mqtt in esp32 ? Send all the firmware not the download link of the firmware thanks.

Phoenix•4/5/24, 3:01 PM

Hey @everyone! Come join this week's Office Hours Meetup! https://discord.gg/VpA7PPYT?event=1224832746271150194

barafael•4/5/24, 3:02 PM

i'm just seeing an empty page at livestorm. Is that normal?

Bbarafael i'm just seeing an empty page at livestorm. Is that normal?

NavadeepOP•4/5/24, 3:03 PM

no, if you haven't logged in, you're asked to enter a name and join the room. Join the Stage as Presenter.

barafael•4/5/24, 3:04 PM

it's an empty page, nothing else, I can't enter anything. Tried various browsers and networks

Phoenix•4/5/24, 3:04 PM

@barafael https://app.livestorm.co/devheads-community/devheads-weekly-office-hours-1/live?s=066e5cb4-c707-4013-b591-bf9c471f0978

DevHeads Weekly Office Hours | ThroughPut Marketing

barafael•4/5/24, 3:05 PM

Saßì•4/5/24, 3:08 PM

@StoniGaming Welcome! We're thrilled to have you here. Would you mind introducing yourself and sharing what you do professionally?

PPhoenix Hey @everyone! Come join this week's Office Hours Meetup! https://discord.gg/VpA...

techielew•4/5/24, 3:10 PM

@everyone, we're about to get started with @barafael and @wafa_athmani who will be sharing their experience with Rust and Micropython as well! Jump in and join us!

kristof-at-embeetle•4/5/24, 4:14 PM

kristof-at-embeetle•4/5/24, 4:14 PM

We'll be at Embedded World 2024

kristof-at-embeetle•4/5/24, 4:14 PM

Visit us at booth 3A-322

kristof-at-embeetle•4/5/24, 4:15 PM

We share the booth with Geehy

Ttechielew @everyone, we're about to get started with @barafael and @wafa_athmani who will ...

barafael•4/5/24, 4:26 PM

Was fun! Thanks for hosting

Bbarafael Was fun! Thanks for hosting

techielew•4/5/24, 4:31 PM

Thank you! Great insight. You and @wafa_athmani . I’m looking forward to going deeper into such topics with you in the future! And some great resources!

I’ll drop them in the discussion thread when I get to Europe!

techielew•4/5/24, 4:33 PM

See you all on Sunday for Engineering Hour! https://discord.gg/sCauRvgn?event=1212290859433992202

Bbarafael Was fun! Thanks for hosting

techielew•4/5/24, 4:34 PM

“Micropython will be your first programming language and Rust will be your last.” - @barafael, 4/5/2024

barafael•4/5/24, 4:39 PM

I didn't say that

Python is A great first and Rust A great last language.

Yeah it is! A classic ZYNQ based board. You can also look at PYNQ-Z2 https://in.element14.com/tul-co

Similar Threads

Similar Threads

Similar Threads