VYeah I see this already, but just because the connection was unstable, I thought the stick was not recognized at all. Bug multiplication in a nutshell
Everything works now as it should!
Everything works now as it should!
II've plugged in my 16EX but I'm not getting any button data it seems
II think I'm missing something
FDo you have adapter?
IYes, and selected in the software
IIs there anything I'm supposed to do other than connect the adapter, connect the stick, and select the Winwing adapter in the software?
FThe connector may not have been fully inserted
II took it off and checked, it appears to be.
INo luck 
How would I diagnose if I have a bad stick from WinWing or a bad adapter?
How would I diagnose if I have a bad stick from WinWing or a bad adapter?
WEnable the debug grip profile, it should spam data in the debug tab. Check if it's all FFs or not. All FFs would mean adapter is not communicating with the base.
I
WAll good, so maybe the WW plug is not fully seated, my best guess
IWeird, I took it off and back on a few times and pressed on it pretty good. Didn't twist the stick since I know that can damage the cable.
WI do test the adapter with my F-16EX, first connections are pretty tight sometimes with the 6 pin connector. I usually wiggle the 6pin plug a little while pushing it down.
IDoes it have a positive "click" or something?
IMine didn't snap or click when it went in
IWelp, the Walmis effect is real. I unplugged it, turned the cable a bit, plugged in it. It works.
IThanks! Off to the races!
KSorry
but I am currently experiencing a similar problem.
I have already checked the connections several times
Unfortunately, I'm not sure whether it's the WW adapter or my stick that's causing the problems.
but I am currently experiencing a similar problem.
I have already checked the connections several times
Unfortunately, I'm not sure whether it's the WW adapter or my stick that's causing the problems.
KIs this normal behavior? So much FF
IVery strange problem in DCS, FFB works in single player, in MP in all the servers except our squad server, FFB does not work there, another mate with a Rhino, his FFB works, I repaired DCS, Restarted PC and no joy, any ideas?
BI'm new to rhino but I did notice that the f15e strike eagle gives me no force feedback while all other planes I've tried do. Have you tried different planes?
IYes I tried different planes
3How do I tune down the IL2 shake?
MAny reason why my joystick is not lighting up? All the button inputs are also showing red on the configurator / not registering. Not sure what that means but yea seems joystick is not connected. plugged in before threading on and should be tight.
Mconstellation alpha
MI have my old warbrd base plugged in as well. When I plug grip in there it lights up etc but when vpc is on and plug it in there nothing
FI don't think the Constellation lights up on the Rhino at all.
isn't doing that for me as well.
isn't doing that for me as well.
Mstill if I press buttons I should see them in configurator right?
MI have constellation+prime selected in the configurator
Mjust random buttons are colored red etc. properties in the game controller window show the same thing
Fyou need to calibrate the stick first.
page 11 of the manual.
basically pressing auto calibrate, moving all axes to all extremes etc. and release auto calibrate again.
I can see that you haven't done that yet.
page 11 of the manual.
basically pressing auto calibrate, moving all axes to all extremes etc. and release auto calibrate again.
I can see that you haven't done that yet.
Fmaybe the red will turn white again then. red means pressed.
MSo i pressed the auto calibrate earlier and then unclicked it after moving the stick. Ill try it again
Fyou need to move the HATs, the finger brake etc as well
MAnd then I unclick auto calibrate and say store settings
MJust did that and still the same. I appreciate your help by the way ha
Fthen you might need to calibrate this one I guess:
FI don't know why your buttons are pressed though.
you might have to check the connectors between grip and base. don't know.
best to wait for Walmis's feedback on that.
you might have to check the connectors between grip and base. don't know.
best to wait for Walmis's feedback on that.
Myea so those go to 0 / 0 and do not budge. While in calibration
Fyeah, I suspect something with the connector then.
worked straight when I connected my Constellation Alpha
worked straight when I connected my Constellation Alpha
Minteresting. And then yea I can put my grip on my old virpil base and it just works so might be a connector issue
Fbetter ask Walmis in like 8h then. might as well be something software related. who knows 
M@walmis yea I’m at a loss. Appreciate it whenever you have time to work through this. Essentially when it is plugged into the warbrd virpil base, lights up (I now know it doesn’t on rhino. I usually just use that as an indicator that it is properly plugged in) and when I go to the game pad properties for windows I can press buttons and see it all working. When I plug it into the rhino the only thing working is the axis of the base but nothing from the stick. As also seen some of the buttons are showing pressed but that changes based on the selected grip. I’m the normal constellation alpha grip but going through other ones also doesn’t work. Lastly the debug only states the config applied or config stored. So ultimately yea just feel the stick is not connecting somehow. Again I appreciate it and can get you more details as you need but this sums it up and what I’ve tried.
3How do I tune down the IL2 shake?
NAre you talking about the native game effects or TelemFFB?
3TelemFFB
NI feel like you must be running the legacy (v1.0.0) TelemFFB, else it would be obvious how to turn down the effects.
3I can turn off the effect entirely but there is no slider to adjust it. I have the latest up to date version
3Thanks for the help
