Good deal, I'm about 80 to go in the queue - wondering if this is going to be overpriced and obsolet

Good deal, I'm about 80 to go in the queue - wondering if this is going to be overpriced and obsolete in a year. If you fly warbirds and it gets your stamp of approval, then that's something.

MMashedPotato The Rhino has a ton of power as it is, as the other dude said, it just needs a b...

WhereNoLarkFlewOP•4/10/24, 12:21 AM

Yeah that's a big point in the favor of the Rhino is the software seems like it's quite good. With the growing number of owners it also seems like there's going to be a lot of profiles for different aircraft, let alone the updates that are coming from Walmis and company.

WWhereNoLarkFlew Good deal, I'm about 80 to go in the queue - wondering if this is going to be ov...

I/JG7_Moto•4/10/24, 12:36 AM

I think the Rhino is great, that was my only complaint and is going to addressed , I really enjoy it, the stall buffeting is just like a real plane, also the flaps, and gear movement, machine guns and cannons I suppose so, never fired those IRL

The engine rumble is great too, you will enjoy it for sure.

II/JG7_Moto I think the Rhino is great, that was my only complaint and is going to addressed...

Col. Sanders•4/10/24, 1:35 AM

What type(s) of warbird do you fly? Cool to hear from someone who has hands on experience. I don't think my Cessna flying qualifies me to know if it feels real

Sunshine•4/10/24, 1:53 AM

So what is the latest on the MFG Crosswind FFB kits? I filled out the pre-order

Ice•4/10/24, 2:09 AM

In DCS, if myself and a buddy are in a multicrew helicopter together and he has control and is flying, will my Rhino follow his stick movements?

Ice•4/10/24, 2:09 AM

I believe in DCS it replicates the stick movements on your end if you watch the stick or the RCTRL + Enter controls window

SSunshine So what is the latest on the MFG Crosswind FFB kits? I filled out the pre-order

WhereNoLarkFlewOP•4/10/24, 2:57 AM

Probably getting closer all things considered.

IIce I believe in DCS it replicates the stick movements on your end if you watch the ...

Sunshine•4/10/24, 2:59 AM

I have the Brunner stick base, I was CP/G, my friend was the pilot, my stick was not following him, except when he did the force trim, my stick jumped to his new position in the Apache.

WWhereNoLarkFlew Probably getting closer all things considered.

papiplanes•4/10/24, 3:11 AM

Where’s the preorder list?

CCol. Sanders What type(s) of warbird do you fly? Cool to hear from someone who has hands on e...

I/JG7_Moto•4/10/24, 3:20 AM

This one, CJ6. https://youtu.be/G8Bci2260-U

YouTubeBackcountry182

Warbird Aerobatic and tail chase

For more videos and tips visit
www.Backcountry182.com

Stryker990•4/10/24, 7:49 AM

Poggers got the mail that my rhino is supposed to arrive in like 3-4 hours lets see if DPD can measure up to their claims :poggerschelm3m:

VPforceBot•4/10/24, 8:39 AM

:package:

RHINO #0480 Has Shipped!

VPforceBot•4/10/24, 9:55 AM

:package:

RHINO #0481 Has Shipped!

SSunshine I have the Brunner stick base, I was CP/G, my friend was the pilot, my stick was...

MashedPotato•4/10/24, 1:13 PM

Yeah, this is a DCS limitation, not a hardware limitation; DCS is not coded to have the not in control stick send or receive any inputs

Fr4Ged•4/10/24, 1:32 PM

probably isn't a big deal if you use the trim up correctly in the Apache

Vakarian•4/10/24, 4:10 PM

For DCS users

MP. When started after a DCS client, a local dedicated server "steals" Force Feedback from the DCS client - fixed.

Stryker990•4/10/24, 6:35 PM

which branch of TelemFFB are you guys using? stable or WIP?

Bozo VFA-86•4/10/24, 6:37 PM

what is a client?

Stryker990•4/10/24, 6:50 PM

maybe stupid question but what would be the correct way to turn off the rhino?

BBozo VFA-86 what is a client?

FlatSpin•4/10/24, 6:52 PM

the actual game

AndyHill•4/10/24, 6:55 PM

I have the rhino on an extension I can turn off

AndyHill•4/10/24, 6:55 PM

the big red button should do the trick

mmcmah•4/10/24, 7:10 PM

Hi, I'm going to repost a question I wrote yesterday, in case anyone has any input.

My place in the queue is coming up and I need to make the purchase decision. I searched for Puma and found scant few messages. I'm assuming no one here has incorporated the Puma controls into a Rhino setup? If anyone has, any comments would be appreciated, as I would prefer to continue to use the Puma, along with the Rhino on the cyclic. Thank you.

Ppapiplanes Where’s the preorder list?

Dovivan•4/10/24, 8:39 PM

Write " /info: your email "

DDovivan Write " /info: your email "

papiplanes•4/10/24, 9:00 PM

Oh I was referring to the mfg list to order, or does that command display the information for the FFB MFG kit?

Mmmcmah Hi, I'm going to repost a question I wrote yesterday, in case anyone has any inp...

PiNKSH!T•4/11/24, 2:57 AM

hey m8, won't be able to give you a full answer but, I know the Rhino will work with Thustmaster & Virpil out the box, it will also work with grips that use a shiftregister (though it may need to be a certain type) If you are getting really close you miht consider pinging Walmis for an answer directly? Good luck my, all I can say is no matter what get the Rhino, obviously after the wait time & also the fact I'd rather have the Rhino & figure a way to make it work in my set up rather than not have it, especially if you fly helos, it is a total game changer

Boo Berry•4/11/24, 3:50 AM

Is there a way to set a dead zone for the Rhino in the software vs. the game. For example if I'm using force trim there is ever so slightly a bit of play that is detected center of where ever the stick rests (left, right or anywhere) off center. If you set a deadzone in game it only seems to detect that deadzone when the stick is centered.

PPiNKSH!T hey m8, won't be able to give you a full answer but, I know the Rhino will work ...

mmcmah•4/11/24, 4:59 AM

Thanks mate. Will do.

-= RedBaron =-•4/11/24, 3:11 PM

Anyone use the Rhino is side stick mode like F-16 or F-35?

--= RedBaron =-Anyone use the Rhino is side stick mode like F-16 or F-35?

Chuff•4/11/24, 3:17 PM

I have a real simulator mkII ultra that I use for the f16. Far and away the best option for that plane.

--= RedBaron =-Anyone use the Rhino is side stick mode like F-16 or F-35?

Asdforce•4/11/24, 4:30 PM

I've got mine on the side, along with a TM F-16 grip. It's fine for me, though I've been thinking of center mounting the Rhino and buying a realsim base for F-16 stuff.

哲

哲也•4/11/24, 5:20 PM

I think f16 is better with fssb.

Stryker990•4/11/24, 8:49 PM

does the Winwing F-16EX grip vibration motor still work with the WW adapter?

AndyHill•4/11/24, 8:52 PM

I don't think it does

AndyHill•4/11/24, 8:53 PM

but I don't really know

CChuff I have a real simulator mkII ultra that I use for the f16. Far and away the best...

Duchess ✈•4/11/24, 9:24 PM

I am still waiting for them to get the MKII back in stock so I can order.

Chuff•4/11/24, 9:38 PM

Realsim mfssb and the rhino are definitely my two best flight sim purchases. Covers all of my bases, and the f16 and the tomcat are both so much more fun to fly now. Both worth their high cost and then some.

Chuff•4/11/24, 9:40 PM

Currently have the TM grip on my realsim base and debating buying one of their grips if they ever come back into stock. Not sure. I don’t really love the idea of all the buttons being hat switches, but the grip just looks incredibly nice

Bozo VFA-86•4/11/24, 9:58 PM

CChuff Currently have the TM grip on my realsim base and debating buying one of their g...

Duchess ✈•4/11/24, 10:26 PM

I currently have the WW FSSB with their F-16 grip. Perfectly happy with the grip.

Duchess ✈•4/11/24, 10:28 PM

The whole setup is really the way to go…. WW FSSB, WW TQS and the WW ICP, p,us the TM F-16 MFD frames.

SStryker990 does the Winwing F-16EX grip vibration motor still work with the WW adapter?

TrigaNZ•4/11/24, 10:48 PM

--= RedBaron =-Anyone use the Rhino is side stick mode like F-16 or F-35?

Col. Sanders•4/12/24, 2:20 AM

I use side stick, works best with my setup and find it to work extremely well.

Will3D•4/12/24, 4:00 AM

I own a VP DIY kit with BLF86 motors and have been very happy with the performance. With the addition now of the telemetry software I feel it offers incredible performance.

Will3D•4/12/24, 4:01 AM

I also own a set of Brunner yoke and pedals. However I am playing with the idea of selling these to build VPforce based replacements.

Will3D•4/12/24, 4:04 AM

Mainly due to the Brunners not giving any actual feedback, only simulated from speed or engine rpm.

Will3D•4/12/24, 4:06 AM

Question 1. What is the current wait time for kits ?

Will3D•4/12/24, 4:11 AM

2. Anyone have experience with both ? Thoughts ? Silly idea? just stick with Brunner ( pardon the pun)

Lance•4/12/24, 8:11 AM

what is this like ojn f16s and f18s? is this more more helis only? i fly both. just found out about these 30 mins ago. i only know about virpil and winwing

VPforceBot•4/12/24, 8:18 AM

:package:

RHINO #0482 Has Shipped!

Good deal, I'm about 80 to go in the queue - wondering if this is going to be overpriced and obsolet

Similar Threads