If you do a fetch over the internet instead of a fetch on the binding that would be cause for latenc

If you do a fetch over the internet instead of a fetch on the binding that would be cause for latency. But yes they would both have zero-latency done through binding

UUnsmart If you do a fetch over the internet instead of a fetch on the binding that would...

thipperz•4/10/24, 9:23 PM

How do I do a fetch on the binding? Is it something like BINDING.fetch("/some-route", options)BINDING.fetch("/some-route", options) ? I couldn't find an example on this

一

一块木头•4/11/24, 1:16 AM

Please help me, I don't know why this happened. https://github.com/cloudflare/next-on-pages/issues/740

GitHub

[🐛 Bug]: nextjs local preview succeeded, deployment succeeded, but ...

next-on-pages environment related information System: Platform: darwin Arch: x64 Version: Darwin Kernel Version 23.1.0: Mon Oct 9 21:27:27 PDT 2023; root:xnu-10002.41.9~6/RELEASE_X86_64 CPU: (16) x...

bun•4/11/24, 2:20 AM

pages_build_output_dirpages_build_output_dir should be set to .vercel/output.vercel/output ?

一一块木头 Please help me, I don't know why this happened. https://github.com/cloudflare/ne...

Rafael França•4/11/24, 3:04 AM

You need to set the “nodejs_compat” flag. In my tests, I had success when I configured the flag in the settings of the project on the dashboard.

Rafael França•4/11/24, 3:05 AM

For some reason the flag In wrangler.toml is ignored. However, In my case was a monorepo.

RRafael França You need to set the “nodejs_compat” flag. In my tests, I had success when I conf...

一

一块木头•4/11/24, 3:27 AM

Yes, it's already set.

一

一块木头•4/11/24, 3:36 AM

一一块木头 Please help me, I don't know why this happened. https://github.com/cloudflare/ne...

thanhle•4/11/24, 5:49 AM

try to add the nodejs-compact to the wrangler pages deploy command and try to re deploy because If you manually add the nodejs-compact in the dashboard, you need to redeploy to see the effect

Tthanhle try to add the nodejs-compact to the wrangler pages deploy command and try to re...

一

一块木头•4/11/24, 5:59 AM

https://github.com/hehehai/at4-kit

GitHub

GitHub - hehehai/at4-kit

Contribute to hehehai/at4-kit development by creating an account on GitHub.

一

一块木头•4/11/24, 5:59 AM

I tried again many times

thanhle•4/11/24, 6:00 AM

i saw you have prisma. this maybe not supported by next on pages

Tthanhle i saw you have prisma. this maybe not supported by next on pages

一

一块木头•4/11/24, 6:05 AM

Really? I'm using prisma and d1, so I'll switch to drizzle and give it a try.

一

一块木头•4/11/24, 6:05 AM

Do you know the specific reason why it is not supported? I see that the build and deployment was successful, but the deployed service failed.

一一块木头 Really? I'm using prisma and d1, so I'll switch to drizzle and give it a try.

bun•4/11/24, 8:35 AM

prisma d1 is supported ofc

一

一块木头•4/11/24, 10:35 AM

Yes, I know it is possible. My local preview mode is normal. The problem is that the deployment results are not accessed in pages.

一一块木头 Click to see attachment

一

一块木头•4/11/24, 10:35 AM

it is like this

一一块木头 https://github.com/hehehai/at4-kit

一

一块木头•4/11/24, 10:37 AM

Can someone try deploying this repository on pages to test it?

bun•4/11/24, 10:40 AM

Is DO rpc not supported for pages?

SSeeringPhil Hello again! We've now correctly activated KV cache to handle next.js automati...

SeeringPhil•4/11/24, 2:18 PM

^ Anyone familiar with using the suspense cache (basic fetch request caching, configured to use KV) to share data between build time (static pages) and server rendering time (pages defined with the edge runtime)?

JJuul `"@cloudflare/next-on-pages": "^1.11.0",` `"next": "^14.0.4",`

James•4/11/24, 6:58 PM

Do you have a reproduction you can share? I wasn't able to reproduce this with Next.js 14.0.4 or 14.1.4

SSeeringPhil Hello again! We've now correctly activated KV cache to handle next.js automati...

James•4/11/24, 7:04 PM

We have no knowledge of what happens when Next.js builds your application, so I don't think it would really be possible for us to do that

Bbun `pages_build_output_dir` should be set to `.vercel/output` ?

James•4/11/24, 7:06 PM

.vercel/output/static

.vercel/output/static

thipperz•4/11/24, 8:35 PM

How can I interact with my production R2 buckets from next-on-pages? I need a way to upload an image and then get its public url

SSeeringPhil ^ Anyone familiar with using the suspense cache (*basic fetch request caching, c...

Nob•4/11/24, 9:20 PM

you can't cache request at build time for ssr

Nob•4/11/24, 9:21 PM

and wdym by "static pages", its not possible to have both static pages and ssr on same project

NNob and wdym by "static pages", its not possible to have both static pages and ssr o...

SeeringPhil•4/11/24, 9:46 PM

We have that working fine right now, so yes, I'm pretty sure it's possible to have some of our routes render pages statically and some other routes be SSR!

The pages we built statically do not call the workers and simply serve what was rendered at build time, while pages using the edge runtime are SSRd just fine! (well, except for the issue I'm tackling right now regarding the sharing of data

)

NNob and wdym by "static pages", its not possible to have both static pages and ssr o...

James•4/11/24, 10:04 PM

it is. only routes marked as edge runtime will be SSR. other routes will be prerendered at build time.

Tthipperz How can I interact with my production R2 buckets from next-on-pages? I need a wa...

一

一块木头•4/12/24, 12:51 AM

This https://dub.co/blog/image-hosting-r2

Building a Scalable & Affordable Image Hosting Pipeline with Cloudf...

We recently migrated our image hosting from Cloudinary to Cloudflare R2. This post details the reasons behind the switch, the pros and cons of Cloudflare R2, and how we implemented it in our codebase.

Kaze•4/12/24, 12:52 AM

Hello! Is there any special configuration to run a fullstack application (with some pages on the server) on cloudflare? Everything is well installed, but when entering the web everything is black

JJames `.vercel/output/static`

一

一块木头•4/12/24, 12:52 AM

Can you take a look at my problem? I saw that other people have encountered the same problem https://github.com/cloudflare/next-on-pages/issues/740

GitHub

[🐛 Bug]: nextjs local preview succeeded, deployment succeeded, but ...

一一块木头 Can you take a look at my problem? I saw that other people have encountered the ...

James•4/12/24, 5:54 AM

i would recommend posting in pages-help or creating a support ticket. it will probably need an employee to check your deployment's logs to see if there is something going wrong there. it's possible your worker bundle might be too big for your plan (e.g. 1mb on workers/pages free)

JJames it is. only routes marked as edge runtime will be SSR. other routes will be prer...

Nob•4/12/24, 9:20 AM

are you sure ?
I get this error when not adding edge to routes
ERROR: Failed to produce a Cloudflare Pages build from the project.
12:27:51.712

12:27:51.712

The following routes were not configured to run with the Edge Runtime:
12:27:51.712

/ark-survival-ascended
12:27:51.712
12:27:51.713 Please make sure that all your non-static routes export the following edge runtime route segment config:
12:27:51.713 export const runtime = 'edge';
12:27:51.713
12:27:51.713 You can read more about the Edge Runtime on the Next.js documentation:
12:27:51.713 https://nextjs.org/docs/app/building-your-application/rendering/edge-and-nodejs-runtimes

Rendering: Edge and Node.js Runtimes | Next.js

Learn about the switchable runtimes (Edge and Node.js) in Next.js.

NNob are you sure ? I get this error when not adding edge to routes ERROR: Failed to...

thanhle•4/12/24, 1:10 PM

yes. only edge route will have ssr, other route will be static prerendering at build time. you can check the static rendered page on .vercel output dir

NNob are you sure ? I get this error when not adding edge to routes ERROR: Failed to...

SeeringPhil•4/12/24, 1:10 PM

Please make sure that all your non-static routes export the following edge runtime route segment config:"

^ The error is stating that you are trying to render a dynamic page statically, that's what isn't working

SSeeringPhil "⚡️ Please make sure that all your *non-static routes* export the following edge...

Nob•4/12/24, 1:58 PM

that page is static

Nob•4/12/24, 1:59 PM

export default async function Page() {
    return (
        <div
            className={
                "flex flex-col justify-center items-center min-h-screen py-2 w-full"
            }
        >
            test
        </div>
    );
}

export default async function Page() {
    return (
        <div
            className={
                "flex flex-col justify-center items-center min-h-screen py-2 w-full"
            }
        >
            test
        </div>
    );
}

paulc•4/12/24, 2:04 PM

does anyone have authjs sample code working using the app/api/auth/[...nextauth] approach you can point to? When I deploy to pages and view the site I get nextjs' 500 internal server error page .

Kaze•4/12/24, 2:39 PM

hi all!

Kaze•4/12/24, 2:39 PM

I have a problem with @cloudflare/next-on-pages CLI

Kaze•4/12/24, 2:40 PM

When I try to run "npm run deploy" this message appears:

Warning: It seems like you're on a Windows system, the Vercel CLI (run by @cloudflare/next-on-pages

to build your application) seems not to work reliably on Windows so if you experience issues during

the build process please try switching to a different operating system or running

@cloudflare/next-on-pages under the Windows Subsystem for Linux

Kaze•4/12/24, 2:40 PM

then a bash terminal opens, and I run again the "npm run deploy" and again, the same message and opens again a new bash terminal

Kaze•4/12/24, 2:40 PM

an so on

Kaze•4/12/24, 2:40 PM

is there a solution for this? thanks for the help!

paulc•4/12/24, 2:49 PM

Install WSL https://learn.microsoft.com/en-us/windows/wsl/install

Install WSL

Install Windows Subsystem for Linux with the command, wsl --install. Use a Bash terminal on your Windows machine run by your preferred Linux distribution - Ubuntu, Debian, SUSE, Kali, Fedora, Pengwin, Alpine, and more are available.

paulc•4/12/24, 2:50 PM

It's reliable and if you're familiar with linux, is very close experience to working in a linux environment.

Ppaulc 👋 does anyone have authjs sample code working using the app/api/auth/[...nexta...

James•4/12/24, 4:50 PM

Are you using v5 of next-auth, which is currently under next-auth@beta?

JJames Are you using v5 of next-auth, which is currently under next-auth@beta?

paulc•4/12/24, 5:13 PM

Yes - next-auth@5.0.0-beta.16 to be exact.

Ppaulc 👋 does anyone have authjs sample code working using the app/api/auth/[...nexta...

oreq•4/12/24, 8:26 PM

Hi, use this command to see error

npx wrangler pages deployment tail

npx wrangler pages deployment tail

oreq•4/12/24, 8:32 PM

Have any of you used next-auth with middleware on next-on-pages without error? I'm trying to do that and everything works good on

npm run dev

npm run dev

but when I try to start it with

"preview": "npm run pages:build && wrangler pages dev .vercel/output/static",

"preview": "npm run pages:build && wrangler pages dev .vercel/output/static",

req.auth starts be always null and I don't know why because I don't getting any error.

middleware.ts

import { NextResponse } from "next/server"

import { auth } from "./auth"

export default auth((req) => {
  const isAuth = req.auth // always returning null when it is run on wrangler pages dev

import { NextResponse } from "next/server"

import { auth } from "./auth"

export default auth((req) => {
  const isAuth = req.auth // always returning null when it is run on wrangler pages dev

I use drizzle orm with d1 for database

James•4/12/24, 9:09 PM

What is req.auth and why are you trying to modify the request object?

If you do a fetch over the internet instead of a fetch on the binding that would be cause for latenc

Similar Threads

Similar Threads

Similar Threads