DevHeads IoT Integration Server•2y ago

3:00 uct am or pm?

Eelectro_coco 3:00 uct am or pm?

Petr Dvořák•4/16/24, 9:28 AM

Yyoucef_ali I found a lot of circuits what i need to know for example the filter frequency h...

techielew•4/16/24, 12:05 PM

@ShreeshaN may be able to provide some input here

Yyoucef_ali I found a lot of circuits what i need to know for example the filter frequency h...

ShreeshaN•4/16/24, 12:09 PM

Is there a reason to go with analog circuits, they are available as digital sensors I think?

techielew•4/16/24, 12:12 PM

Any @MCU, MPU & Firmware devs have experience debugging Cortex-M4F? @ddmiller3 needs some help figuring out why he can’t write to flash. He’s using a JLink probe to debug.

🪲-firmware-and-baremetalHow do you debug a bricked Arm device (Unbricking a bricked Arm Cortex M4)

Camila_99$$•4/16/24, 1:37 PM

Hi everyone, Working on a project involving DC current measurement (up to 5A), I tested the ACS712 current sensor but the result is not stable. I have a variation of +/- 500mA. I’m not specifically looking for precision but rather measurement stability. Is there a more stable alternative? I thought about using a 1mohm shunt coupled with an op-amp like the LMV358. What do you think?

Stuart Cording•4/16/24, 1:52 PM

Hi All, this is Stuart, the "Electronics Reporter". I'm an electronics engineer and currently spend some time working for the trade press (like Elektor) looking at new products and technologies and interviewing engineers.

CCamila_99$$Hi everyone, Working on a project involving DC current measurement (up to 5A), I...

aymen ammari•4/16/24, 1:54 PM

Try using LA25-p it's more accurate

aymen ammari•4/16/24, 1:57 PM

https://youtu.be/kiKbcGBL8iQ?si=MTO-IIfKPjc8qpb2

YouTubeAbdelrahman Farghly

LA 55 P current sensor

F28379D LaunchPad DSP playlist videos
https://www.youtube.com/playlist?list=PLUSE6w0Kh7fKkfyzKIF00IQRHhdHkQIUr

Accur4te•4/16/24, 2:10 PM

Which is the ideal iot protocol for battery powered sensors and suitable to be installed in factories ?

Saßì•4/16/24, 2:17 PM

Friendly reminder about Upcoming Event
Save the date & Time
https://discord.com/invite/Qe7tD2Dm?event=1229650069733773332

AAccur4te Which is the ideal iot protocol for battery powered sensors and suitable to be i...

boualleg sabrina•4/16/24, 2:35 PM

I think ZigBee because it's known by it's low power consumption

wafa_ath•4/16/24, 2:53 PM

Hello everyone, am doing metal detector using Arduino, can u segest a kit or sensor i can use to detect with it

SStuart Cording Hi All, this is Stuart, the "Electronics Reporter". I'm an electronics engineer ...

Navadeep•4/16/24, 4:34 PM

Hi Stuart! Your fan here :salute:

Yyoucef_ali I found a lot of circuits what i need to know for example the filter frequency h...

Navadeep•4/16/24, 4:38 PM

you can use simulator like TINA-TI with say a programmable gain amplifier (ex: PGA849) and try to tune it. even filter frequency you can evaluate there once you decide what is your frequency of interest and choose a type of filter(lowpass, bandpass).

Navadeep•4/16/24, 4:39 PM

likely the signal will follow this sequence.

sensor/detector --> pass filter(pick desired freq band) --> more filter stages? --> Amplifier(programmable gain if your reception response is dynamic) --> sampling with ADC

Wwafa_ath Hello everyone, am doing metal detector using Arduino, can u segest a kit or sen...

JeremyCook•4/16/24, 5:01 PM

Hello - this is a friend of mine's kit/design: https://www.tindie.com/products/fourbitindustries/metal-detector-learn-to-solder-kit/

maybe it will give you some ideas.

Tindie

Metal Detector - Learn to Solder Kit by Four Bit Industries on Tindie

Make a metal detector and go hunt for treasure!

nour_oud•4/16/24, 5:17 PM

Friendly Reminder: DevHeads Giveaway Alert!

Hey DevHeads! Don't miss out on your chance to win up to $50 in our awesome giveaway!

How to Enter:

Visit our GiveLab page: Enter Here

Complete the steps to register your entry.

Remember, more steps = more entries, increasing your chances of winning! Open to all engineers and developers. Good luck!

JJeremyCook Hello - this is a friend of mine's kit/design: https://www.tindie.com/products/f...

wafa_ath•4/16/24, 5:36 PM

Interesting

Camila_99$$•4/16/24, 7:52 PM

@aymen ammari I just watched the video, thank you for your effort

CCamila_99$$@aymen ammari I just watched the video, thank you for your effort 🤩

aymen ammari•4/16/24, 7:52 PM

You're very welcome

Camila_99$$•4/16/24, 7:55 PM

Top 15 useful Al websites in 2024

Momen.app - Build Al-native apps, and custom GPTs with No Code
Candylcons -Create app icons with Al
Cohesive - Create magical content
Invideo Create faceless YouTube channel
Opus Pro- Create 10 viral clips instantly 5. Speechify- Create Al voice from text
Durable- Create websites in mins
Synthesia- Create Al-talking avatar
Formulabot- Create Excel formulas from text
Photoroom- Create product and portrait pics
Kickresume- Create Al resume
Tome app- Create presentation slides
Jenni Al - Write research paper
Rytr - write 10x faster
Visme - Create any design
Repurpose io - Repurpose social content