VPforce Controls•2y ago

all VPC grips are supported. Also all TM grips. VKB with adapter and also Winwing with adapter

all VPC grips are supported.
Also all TM grips.
VKB with adapter and also Winwing with adapter

SR-F_Winger_[73]_DavidOP•4/16/24, 12:14 PM

at least i got this info. please correct me if i am wrong;)

SSR-F_Winger_[73]_David all VPC grips are supported. Also all TM grips. VKB with adapter and also Winwin...

YunacPL•4/16/24, 12:20 PM

yep i have 2 alphas and 2 TM grips just wondered if the older VPC stick will work due its not listed

SR-F_Winger_[73]_DavidOP•4/16/24, 12:23 PM

ahh i get it. Walmis will have the answer. Wild guess: it whould work..

walmis•4/16/24, 12:24 PM

Yeah, it should work.

Sudeebare•4/16/24, 12:58 PM

I'm trying to get my preorder # for my Rhino and ship date for my VKB adapter order #907 from the bot but am only getting this response: "Sorry, I don't know what you mean, try !help" How do I get the bot to understand my request?

Spelljammer1•4/16/24, 12:59 PM

Is it safe to keep the Rhino base connector for the grips unscrewed?

This is in the context of static connector on grips such as TMs and RealSimulators, where the mini-din does not stretch out or rotate. I had some damaging consequences when pairing a static connector (like the Rhino) with a static grip connector (like the Realsim/TM grips).

SSudeebare I'm trying to get my preorder # for my Rhino and ship date for my VKB adapter or...

Fr4Ged•4/16/24, 1:29 PM

well, try the !help command and do as the bot says.
you basically want to use the "!info [your e-mail adress]" command.

Sudeebare•4/16/24, 1:51 PM

Just checked my email and now have tracking # for 907. Thanks!

Wwalmis Uh, that was quite a drop 😕 Fill out the http://order.vpforce.eu form, I'll sen...

FEVER 1-2 | FZG_Flav•4/16/24, 2:52 PM

I received the new parts for replacement. Thx you very much.

Sudeebare•4/18/24, 12:00 PM

I would like to find an extension to use with the VPForce VKB adapter. It looks as though the VPC 50/75/100mm adapters might be useable for that purpose. Can anyone confirm that those extensions will accept the VKB adapter threads for mounting to the Rhino?

AndyHill•4/18/24, 1:01 PM

I can't confirm, but the Rhino already basically has a built-in extension so if you haven't I suggest you make some actual measurements to make sure you actually need an extension

SSudeebare I would like to find an extension to use with the VPForce VKB adapter. It looks ...

walmis•4/18/24, 1:12 PM

Yeah, VKB adapter will go on VPC extension without problem

Sudeebare•4/18/24, 2:11 PM

Thanks!

Sup3rToc0!•4/18/24, 10:35 PM

Has anyone had a problem where you get charged twice at payout?

Skete•4/19/24, 3:26 AM

hey all, I know for sure I have seen people talk about this before however my brain can't find anything searching for it.
My question is under what setting in the configurator would cause the stick to wobble back and forth as its trying to recentre itself - I have found reducing the spring gain slows it down but i've definitely touched something months ago and can't remember what it was. sometimes now the stick will exponentially wobble itself out of control.

YunacPL•4/19/24, 6:04 AM

How does the shift register board work ? Is it plug and play? Does it have axis outputs?

YYunacPL How does the shift register board work ? Is it plug and play? Does it have axis ...

walmis•4/19/24, 6:06 AM

It connects to the 5 pin grip connection and allows to wire up to 32 buttons

SSkete hey all, I know for sure I have seen people talk about this before however my br...

walmis•4/19/24, 6:07 AM

I'd recommend loading up the default Rhino configuration - it's included in

configs

configs

directory with the configurator

Wwalmis It connects to the 5 pin grip connection and allows to wire up to 32 buttons

YunacPL•4/19/24, 6:08 AM

Thanks is there any simple small board with at least 3 axis small enough to fit into grip supported by the base ? Im trying to avoid external wiring

walmis•4/19/24, 6:09 AM

It's possible via a microcontroller https://discord.com/channels/965234441511383080/1185807510993637386

Wwalmis It's possible via a microcontroller https://discord.com/channels/965234441511383...

YunacPL•4/19/24, 6:10 AM

That's fantastic thank you !

Will iam•4/19/24, 12:02 PM

super random question

Will iam•4/19/24, 12:03 PM

looking at the website (I know nothing) there are two or one motors offered in a bundle

Will iam•4/19/24, 12:03 PM

Im guessing the motors are rotary ones, so two are needed for 4 axis?

Fr4Ged•4/19/24, 12:13 PM

there are only 2 axes in a joystick. x and y.

WWill iam looking at the website (I know nothing) there are two or one motors offered in a...

Fierce_Fire•4/19/24, 12:28 PM

The single motor is for diy FFB pedal mods

Will iam•4/19/24, 12:29 PM

ohh, thank you :)

Carmel•4/19/24, 1:56 PM

Hi guys, im strugling with a strange situation on MSFS Fenix A320. When im move the stick on aileron axis the aircraf have a tendency to virtualy center the sidestick and back to normal position in fraction of seconds. Theres no other devices controlling aileron or pitch axis. Im really dont know wqhat is happening. This issue occurs only when TelemFFB is enabled.

Epyon•4/19/24, 2:47 PM

Hi all, I have a weird problem with the Viggen in DCS. This only happens with the Viggen. Trim commands seem to move the stick to the opposite side. in the aircraft, the trim works as intended (left trim moves the stick towards the left) however, the stick moves to the right, which counteracts the trim in the aircraft by physically moving the stick to the opposite side. So any trim input will be nullified by the opposing forces between the aircraft stick, and the physical stick. help?

EEpyon Hi all, I have a weird problem with the Viggen in DCS. This only happens with th...

Jehly•4/19/24, 3:46 PM

Everything else work?

EEpyon Hi all, I have a weird problem with the Viggen in DCS. This only happens with th...

walmis•4/19/24, 4:22 PM

Maybe you need to invert the trim in FFB tune menu in DCS

MichalK•4/19/24, 7:08 PM

Yes, the VIggen is the only one in DCS where I had to invert FFB axis in DCS options

Wwalmis Maybe you need to invert the trim in FFB tune menu in DCS

Epyon•4/19/24, 7:36 PM

This worked. Thank you!

Stryker990•4/20/24, 11:41 AM

@walmis is it possible to turnaround one (not both) of the connector plugs on the winwing adapter 180°?

I/JG7_Moto•4/20/24, 12:22 PM

@walmis The fan on the Rhino goes ON very loud sometimes, is this ok? Sound does not bother me, I have headphones, just want to know if something can get damaged with the Rhino.

SStryker990 @walmis is it possible to turnaround one (not both) of the connector plugs on th...

walmis•4/20/24, 12:31 PM

No, any reason to rotate them? The winwing grip has a free cable in the grip

II/JG7_Moto @walmis The fan on the Rhino goes ON very loud sometimes, is this ok? Sound does...

walmis•4/20/24, 12:31 PM

Yeah, those fans can be a bit whiny, I'll add some tuning in the future to quiet them down a bit

Fr4Ged•4/20/24, 12:38 PM

I haven't managed to turn them on by use yet. lol

Wwalmis No, any reason to rotate them? The winwing grip has a free cable in the grip

Stryker990•4/20/24, 12:39 PM

the extension i bought has the connectors the other way round and since its a goosenecked extension i decided to just turn the connected on the rhino 180°

amadeus•4/21/24, 2:57 AM

any chance of a new firmware update soon?

looking forward to those saturation improvements for force compensation

amadeus•4/21/24, 3:01 AM

well, i guess general saturation, i notice even if i fix it to not be a problem be a problem with 100% spring in the configurator, the F14 DCS module will end up over-saturating and creating that sort of drop off effect (i notice it definitely during takeoff)

amadeus•4/21/24, 3:02 AM

for context, in reference to this issue: https://canary.discord.com/channels/965234441511383080/968208779084701716/1165770657439695008

Hammer•4/21/24, 2:44 PM

@walmis I am having an issue with using any thrustmaster grip to work. I select Generic Grip, apply and save, and every time I push one button the whole Colum of buttons register a press. I have zero issues with my virpil f-14 grip though. What am I missing, why dosen't TM grips work?

Wwalmis Yeah, I get the same behavior if I disconnect the +5V wire going to the grip. So...

Mistic•4/21/24, 4:07 PM

I got it to work! Yes the +5V wire was hanging partially out. Weird but it is working wonderfully now. Truly impressive Walmis!

HHammer @walmis I am having an issue with using any thrustmaster grip to work. I select...

TheAmazinGreat•4/21/24, 5:29 PM

Change to the debug grip profile and post the debug window.

Hammer•4/21/24, 6:51 PM

@TheAmazinGreat

Hammer•4/21/24, 6:52 PM

it continues to log the same over and over

Hammer•4/21/24, 6:53 PM

that was the f/a-18 grip with no buttons being pressed

Hammer•4/21/24, 6:55 PM

this is the a10/ f16 grip with the trigger being held

TheAmazinGreat•4/21/24, 7:31 PM

Walmis may chime in and know right away but I would verify all connections between grip and the board. It could be that the virpil grip hits the pins on the connector just right.

all VPC grips are supported. Also all TM grips. VKB with adapter and also Winwing with adapter

Similar Threads

Similar Threads

Similar Threads