Do you have any unpaid invoices, or anything obviously wrong with billing? Otherwise will have to re

Do you have any unpaid invoices, or anything obviously wrong with billing? Otherwise will have to reach out to them and ask why

CChaika Do you have any unpaid invoices, or anything obviously wrong with billing? Other...

./BrunoXing.sh•5/1/24, 3:43 PM

As far as I know, nop
But I can double check that, just allow me 5min for that

./BrunoXing.sh•5/1/24, 3:44 PM

Also, just to adding a note, it is with all the domains I have under my account

All of them are having the same

ChaikaOP•5/1/24, 3:45 PM

yea sounds like an account-wide restriction, billing issues would do that and I believe Trust and Safety can as well (although I'm not really sure how exactly they apply stuff)

./BrunoXing.sh•5/1/24, 3:46 PM

Got one partially paid bill
Was from a domain renew, weird

./BrunoXing.sh•5/1/24, 3:46 PM

But I don't see anywhere to pay the remaining

ChaikaOP•5/1/24, 3:47 PM

yea that is weird and what would do it, the billing migration messed with that as well. That's CFUSA-xxxx and not IN-xxx so that's an old invoice, the pay bill stuff went away afaik. If you click on it and go to the pdf, do you get an option to pay your bill there? Might just be the new ones

ChaikaOP•5/1/24, 3:48 PM

the new ones have pay online links inside of them

CChaika yea that is weird and what would do it, the billing migration messed with that a...

./BrunoXing.sh•5/1/24, 3:48 PM

Let me check

ChaikaOP•5/1/24, 3:48 PM

otherwise will have to billing ticket and ask how you can pay it, not sure what they will do but you're not the first I've heard stuck with this, they're migrating billing platforms https://www.cloudflarestatus.com/incidents/wsjmr28lwxw3 and it's been a mess lol

CChaika yea that is weird and what would do it, the billing migration messed with that a...

./BrunoXing.sh•5/1/24, 3:49 PM

Confirmed
No link is present inside the invoice

CChaika otherwise will have to billing ticket and ask how you can pay it, not sure what ...

./BrunoXing.sh•5/1/24, 3:50 PM

Well...
I mean, I already have this error for nearly like, 5 months, but never got any attention because I didn't needed a custom domain to be linked to any bucket

But now I have this, I need for a university project I am doing, and I got "stuck" with this

../BrunoXing.sh Well... I mean, I already have this error for nearly like, 5 months, but never g...

ChaikaOP•5/1/24, 3:51 PM

well that unpaid invoice was from ~3 months ago

CChaika well that unpaid invoice was from ~3 months ago

./BrunoXing.sh•5/1/24, 3:51 PM

Maybe, was a domain renewed previously?

ChaikaOP•5/1/24, 3:51 PM

if you need it critically, you have the option of the r2.pub (which has ratelimiting, but might not matter for your use case) or a Worker bound to the bucket, there's a library that makes it easy: https://github.com/kotx/render

CChaika if you need it critically, you have the option of the r2.pub (which has ratelimi...

./BrunoXing.sh•5/1/24, 3:52 PM

I mean, I am using that solution, and it "works" for now

But, at night, the speeds of download that the r2.pub link offers are like kbps

./BrunoXing.sh•5/1/24, 3:52 PM

Asides that slowdown at night, works fine

CChaika if you need it critically, you have the option of the r2.pub (which has ratelimi...

./BrunoXing.sh•5/1/24, 3:53 PM

Well, maybe the only option I have is to raise a Billing ticket and wait for a response, is that correct?

../BrunoXing.sh Well, maybe the only option I have is to raise a Billing ticket and wait for a r...

ChaikaOP•5/1/24, 3:53 PM

other then using r2.dev or a custom domain, to fix the actual issue yea, have to billing ticket and wait, and I know they're a bit slow right now because of all the migration issues

CChaika other then using r2.dev or a custom domain, to fix the actual issue yea, have to...

./BrunoXing.sh•5/1/24, 3:54 PM

No worries
If I don't get a response in 2-3 weeks, I just say that the account was a free one for the project lol, inside the uni report

Eduardo Muniz•5/1/24, 3:55 PM

Does anyone know how to use r2 with FLUTTER? I've already tried a lot of package, I also tried postman, in the end nothing seems to work, if anyone can help me

./BrunoXing.sh•5/1/24, 3:55 PM

But have to say
Many thanks for the help here! Got some light inside this dark tunnel

../BrunoXing.sh I mean, I am using that solution, and it "works" for now But, at night, the spe...

ChaikaOP•5/1/24, 3:55 PM

that's not the ratelimiting of r2.dev afaik, that sounds more curious. Is your bucket in apac or something?

../BrunoXing.sh But have to say Many thanks for the help here! Got some light inside this dark t...

ChaikaOP•5/1/24, 3:55 PM

yea at least you know now, sadly R2 Custom Domains don't expose those issues. Pages Custom Domains didn't for a while either, hopefully R2 will one day

CChaika that's not the ratelimiting of r2.dev afaik, that sounds more curious. Is your b...

./BrunoXing.sh•5/1/24, 3:55 PM

Nop, bucket is inside the EU Jurisdiction

../BrunoXing.sh Nop, bucket is inside the EU Jurisdiction

./BrunoXing.sh•5/1/24, 3:56 PM

And this is a requirement for the project of my university, because of GDPR and data protection in Portugal

WWallslide I just want to confirm that for large file uploads (> 100MB), I need to use the ...

ChaikaOP•5/1/24, 4:28 PM

it's your website's/zone's upload limit, not Workers specific:

ChaikaOP•5/1/24, 4:29 PM

Workers can do multipart too: https://developers.cloudflare.com/r2/api/workers/workers-multipart-usage/

ChaikaOP•5/1/24, 4:29 PM

You have your website/zone's upload limit, and then R2's limit of 5 GB per put until forced to use multipart. CF buffers the entire upload at edge to avoid some attacks.

WWallslide and does that same limit exist for a client downloading a file (using the worker...

ChaikaOP•5/1/24, 4:29 PM

as long as you stream it (return the .body, which is a ReadableStream), then you have no limit on downloads

Bryant•5/1/24, 9:25 PM

Hey guys, I'm completely new to r2. I currently use the images API to upload images to cloudflare but I am curious as to if you can store the same images in r2?

MMisteriumbr Hi guys, I need your help, I uploaded my files to R2 and connected my domain to ...

Misteriumbr•5/1/24, 10:31 PM

help

Jhon Eduard•5/2/24, 12:34 AM

Hi, I'm new to R2 and I wanted to know how I can get the URL of the images I upload to R2. Thank you

cnki•5/2/24, 3:10 PM

After the successful upload of the application request to R2, an error occurred. Currently, R2 is in the process of multipart upload (the object in this error state cannot be deleted), making it impossible to delete the storage bucket. The error message indicates that the storage bucket is not empty (all other objects have been deleted except for this object in the error state). How can this be resolved? Should we wait for the 7-day lifecycle?

cnki•5/2/24, 3:15 PM

The following settings have been configured:

Objects will be deleted 1 day later.
Uploads will be aborted 1 day later. However, the page indicates specifying rules for automatically deleting objects at a designated time. Will the lifecycle set on previous requests be executed accordingly?

cnki•5/2/24, 3:21 PM

The application indicates that the upload was successful, but suddenly an error occurred, and R2 displays that the upload is in progress.

cnki•5/2/24, 3:23 PM

Do we need to wait for the default 7-day lifecycle set previously, or the new 1-day lifecycle that has been configured now?

cnki•5/2/24, 3:34 PM

Error occurred when deleting the storage bucket: The bucket "kodbox" is not empty, so it cannot be deleted. I have already cleared the objects. However, I can't end the one that's currently uploading, but the application requests indicate that the upload has been successful.

cnki•5/2/24, 3:37 PM

Can we add a feature to manually terminate upload tasks without waiting for such a long lifecycle? This is very problematic; once an error occurs, waiting for the lifecycle to terminate is not ideal.

cnki•5/2/24, 3:39 PM

Errors need to be terminated immediately instead of waiting for the lifecycle to terminate them.

Aiden [Switched to @aidendotgg]•5/2/24, 3:46 PM

Anyone having upload issues with r2 atm? I have some 100kb uploads taking as much as 50,000 ms to upload

607749•5/2/24, 6:55 PM

Sehr gut

607749•5/3/24, 12:35 AM

Eduardo Muniz•5/3/24, 12:42 AM

Hello, can anyone help me? I'm not able to put an object in my bucket, I'm using flutter via rest, it won't work because of the crazy package headers, I've already tested a lot so far without success

Eduardo Muniz•5/3/24, 12:48 AM

@yousef From what I understand, you managed to save an object in the cloud flair bucket, man, I already pasted your code there, I used a lot of packages and nothing, could you give me some light?

Migmac•5/3/24, 12:32 PM

I have my cdn setup with R2. For some reason the custom domain does not work for .zip files? I had to enable R2.dev subdomain to access a .zip file I uploaded. It does work as expected for all other uploads.

Any reason why this could be happening?
When I go to R2 and inspect that given .zip file. it gives me the r2.dev link (that works) and the respective link using my custom domain that shoud work but gives me the:

Error 404
This object could not be viewed
You are not authorized to view this object

Error 404
This object could not be viewed
You are not authorized to view this object

error. Any help would be extremely appreciated.

Do you have any unpaid invoices, or anything obviously wrong with billing? Otherwise will have to re

Similar Threads

Similar Threads

Similar Threads