its pretty easy to over-do dampen/friction/inertia and create an oscillation loop. if you post scre

its pretty easy to over-do dampen/friction/inertia and create an oscillation loop. if you post screenshots of your configurator effects and settings tab in #

support we can look and see if anything looks suspicious.

NNumber481 its pretty easy to over-do dampen/friction/inertia and create an oscillation loo...

Boggy•5/3/24, 7:28 PM

Ok thank you. I'll get those done tomorrow.

Shamansky•5/3/24, 8:18 PM

Wow just wow. Tried by now Mustang, Flanker, Warthog C, Tomcat, Strike Eagle, Harrier, Fulcrum, Hornet... was expecting how trim works on all planes but still positively surprised how well it is now reflected with default stick settings. I didn't even had to calibrate that thing. I think guys already have done it before shipping it to me. Thx!

jpdesvals•5/3/24, 9:22 PM

Hello , i did just try the new OH6 Mod and there is « no match « in Telemffb . Does someone has an idea ? Every other helicopters work perfectly . Thanks !

Jjpdesvals Hello , i did just try the new OH6 Mod and there is « no match « in Telemffb ....

Number481OP•5/3/24, 9:24 PM

You’ll need to create a new profile in TelemFFB when you load it (big purple button). But you’ll need this updated export script first. https://discord.com/channels/965234441511383080/1230852705593851964/1235261252306206740

jpdesvals•5/3/24, 9:25 PM

Ok ! Many thanks will try that ..

jpdesvals•5/3/24, 9:40 PM

Ok new script past but when I launch telemffb i have no more the purple « create new profile « .. and no match again .. any clue ?

Number481OP•5/3/24, 9:46 PM

when you restarted TelemFFB, you told it yes when it asked to update the export script?

You will also have to start a new flight in DCS for the new update script to take effect.

jpdesvals•5/3/24, 9:53 PM

i did select yes for a new profile , then I did try the Huey to compare ( working ) . Then switch back to the oh6 , close and relaunch telem ffb and « no match «

Number481OP•5/3/24, 9:57 PM

Can you post a screenshot? Not sure I understand. If it doesn’t match, you should have the opportunity to add a new profile (the updated script fixes another issue, it doesn’t add a TelemFFB profile).

jpdesvals•5/3/24, 10:00 PM

jpdesvals•5/3/24, 10:00 PM

For the oh 6 ..

jpdesvals•5/3/24, 10:01 PM

jpdesvals•5/3/24, 10:03 PM

And the Huey

NNumber481 Can you post a screenshot? Not sure I understand. If it doesn’t match, you sho...

jpdesvals•5/3/24, 10:04 PM

As you can see no more opportunity to had a new profile .

Number481OP•5/3/24, 10:36 PM

From the screenshot, it looks like TelemFFB isnt even getting any telemetry (hence the “waiting for data”). Can you look in the TelemFFB log for any errors? If you don’t see any errors there, check the DCS log for errors with the TelemFFB export script.

Pikas62•5/4/24, 5:42 AM

Is the VPforceBot currently down? The !info query don‘t work since yesterday evening.

Blender330•5/4/24, 7:12 AM

Same here

krbs•5/4/24, 9:14 AM

Hi, I am looking for rudder pedals (for helicopter). Could you please tell me which pedals are best to use with Vpforce mod? I heart there is bolt on kit for MFG Crosswind? What about SLAW?

DDaz_bike When is the MFG FFB kit expected to start shipping?

Red Magic•5/4/24, 9:49 AM

bump^^

Piola•5/4/24, 12:16 PM

I'll start by saying that the Rhino is a multifunctional base and I'll buy it regardless, but I would like to know, in your opinion, to play with the Helos, isn't it better to use a base with dampeners? What improvements could the Rhino give me?

AndyHill•5/4/24, 12:29 PM

why would it be better to use just a base with dampeners?

Piola•5/4/24, 12:43 PM

because almost all shops that sell helos setups use hydraulic dampeners

Piola•5/4/24, 12:44 PM

I've never tried a helicopter in real life, I don't know what sensations come from cycling and rudders...

Piola•5/4/24, 12:45 PM

if I move a cyclic with hydraulic dampeners on both axes the stick remains in its last position without activating any trim

Piola•5/4/24, 12:50 PM

I'm really ignorant on the subject, I would like some more information

AndyHill•5/4/24, 12:51 PM

I think many real helicopters also allow some spring-based movement around that center point (which changes location as you trim)

AndyHill•5/4/24, 12:51 PM

that's exactly what FFB does for you

Matchstick•5/4/24, 12:51 PM

I'm not an expert either but my understanding is that most modern helecopters do have cyclic centering system which provides force to return the cycliuc to the current trim centre

Bob Bushman•5/4/24, 12:51 PM

The trim turns the hydraulics from damping into power steering.
The static dampened can't do this, the rhino do

AndyHill•5/4/24, 12:52 PM

also FFB gives you the smoothest, zero-friction damping I've ever experienced

AndyHill•5/4/24, 12:53 PM

It might be that for helicopter use you'd want even more damping resistance that you get now, I haven't tested much, but that's probably just a software thing and the quality of the damping you get with FFB is just fantastic

AndyHill•5/4/24, 12:54 PM

you can make arguments for heavy springs & dampers for modern jets being the best possible thing out there, but as far as helicopters go, I think the only reason manufacturers offer dampers instead of FFB is because they can't do FFB

Piola•5/4/24, 12:56 PM

probably the rhino can also simulate a very short movement and high resistance for modern jets (not f16)

PPiola I'll start by saying that the Rhino is a multifunctional base and I'll buy it re...

TheAmazinGreat•5/4/24, 12:57 PM

Most have also failed to mention that Rhino uses electronics to simulate the hydraulic dampeners. And can be tuned to your liking rather than swapping mechanical components.

AndyHill•5/4/24, 12:58 PM

to get realistic jet fighter levels of force on a stick is a lot to ask from an FFB platform, but then again most of us don't have the kind of setup that could handle that kind of loads anyway, so that's super niche

AAndyHill to get realistic jet fighter levels of force on a stick is a lot to ask from an ...

Piola•5/4/24, 1:00 PM

Right, I was talking about the Typhoon stick, I saw it in some videos and it seems to be like an hybrid between a FSSB base and a spring gimbal… rhino could probably replicate it with his software

AndyHill•5/4/24, 1:01 PM

I can't say much about that, since I don't know how it works, but when it comes to weird functionality, FFB is a pretty good bet for simulating anything

Piola•5/4/24, 1:02 PM

I find the rhino super versatile

AndyHill•5/4/24, 1:02 PM

one of the biggest strengths of FFB in a joystick is the ability to be one thing one moment and something completely different the next moment

DDaz_bike When is the MFG FFB kit expected to start shipping?

krbs•5/4/24, 1:02 PM

Is there some pre-order form like for Rhino? Or how do I make order? Do you think there will be kits for other pedals like Virpil and Slaw?

AndyHill•5/4/24, 1:02 PM

my fingers are still bleeding from when I tried lots of different setups on a VKB gunfighter two years ago

AndyHill•5/4/24, 1:03 PM

for a rhino a completely new setup is just some sliders and checkboxes away

AndyHill•5/4/24, 1:04 PM

I think there was some kind of a preorder thing for the pedal kit somewhere or maybe I just donated some organs or something like that, I didn't read too carefully in my excitement

Piola•5/4/24, 1:04 PM

Guys, thanks so much for the answers I was looking for

Kkrbs Is there some pre-order form like for Rhino? Or how do I make order? Do you thin...

Piola•5/4/24, 1:07 PM

https://docs.google.com/forms/d/e/1FAIpQLScJy9f571afga-yYYOE5eqiEacWpqE3UigkC1hfQy6szQnN3g/viewform only MFG

Google Docs

VPforce MFG FFB Kit Preorder

Enter your details here, so you can enter the queue for the VPforce MFG FFB Kit.
Once the queue progresses I will get in touch with further details.

The kit contains:
86BLF03 or 86BLF04 FFB motor
Large gear + 14T motor pulley
Belt HTD5M 400
Motor mount + fasteners
Assembled wiring
Toe brake connectors to VPforce board
Power supply - 19V 9.5A 18...

Number481OP•5/4/24, 1:25 PM

New TelemFFB Hot Patch

- Adds basic support for the new DCS OH-6A community mod
Update from current install or download here: https://vpforcecontrols.com/downloads/TelemFFB/?C=M;O=D

PPiola https://docs.google.com/forms/d/e/1FAIpQLScJy9f571afga-yYYOE5eqiEacWpqE3UigkC1hf...

krbs•5/4/24, 1:29 PM

Thank you very much. Is there also some kit for FFB collective?

Kkrbs Thank you very much. Is there also some kit for FFB collective?

Piola•5/4/24, 1:32 PM

Someone posted some pics but I think the only kit walmis is building is the MFG one

Piola•5/4/24, 1:34 PM

I was hoping in a Slaw Device kit

Piola•5/4/24, 1:35 PM

for the collective I settle for a hydraulic dampener

its pretty easy to over-do dampen/friction/inertia and create an oscillation loop. if you post scre

New TelemFFB Hot Patch

Similar Threads

New TelemFFB Hot Patch