I've been trying to get my www record to work but it doesn't. I'm using bulk redirect rule to redire

I've been trying to get my www record to work but it doesn't. I'm using bulk redirect rule to redirect to apex but in the browser i keep getting "server IP address could not be found." i'm using 192.0.2.1 for A record and 100:: for AAAA record. my apex domain works on its own though.

BBarry_Based_Benson I've been trying to get my www record to work but it doesn't. I'm using bulk red...

Chaika•5/12/24, 6:09 PM

sounds like dns cache, don't get what that has to do with workers/this channel though

Barry_Based_BensonOP•5/12/24, 6:09 PM

whoops wrong channel

CChaika sounds like dns cache, don't get what that has to do with workers/this channel t...

Barry_Based_BensonOP•5/12/24, 6:10 PM

anyways, i tried it in incognito tab and on a different device but it's still not working for some reason

Barry_Based_BensonOP•5/12/24, 6:11 PM

not sure if i messed up a config somewhere or what

BBarry_Based_Benson anyways, i tried it in incognito tab and on a different device but it's still no...

Chaika•5/12/24, 6:11 PM

can you share the domain name in #general-discussions or a thread in #general-help?
(entirely possible you are using your default dns resolver which is usually your ISP's, that would also cache across devices)

CChaika can you share the domain name in #general-discussions or a thread in #general-he...

Barry_Based_BensonOP•5/12/24, 6:14 PM

NVM you were right. i used a VPN and it works now

Barry_Based_BensonOP•5/12/24, 6:14 PM

Thanks for the help

Privt•5/12/24, 7:05 PM

Hey, is it posible to change the MOTD of a Minecraft-Server whit a cloudflare worker. So you could do like that for every subdomain, for example *.example.com the Motd is Hey this is a Minecraft-Server of example.com?

Cyb3r-Jak3•5/12/24, 7:14 PM

I would doubt it. I don't know the minecraft protocol but I would imagine they do it over TCP which workers don't have inbound for

Privt•5/12/24, 7:15 PM

Oh ok, Thank you

CCyb3r-Jak3 I would doubt it. I don't know the minecraft protocol but I would imagine they d...

Privt•5/12/24, 7:16 PM

But do you maybe know a other way? Like not with workers?

PPrivt But do you maybe know a other way? Like not with workers?

Cyb3r-Jak3•5/12/24, 7:49 PM

No. My guess is you'd have to run something in front of the minecraft server to intercept and change the request.

Privt•5/12/24, 8:06 PM

Ok thx for your help.

Martial•5/13/24, 12:23 AM

I just had a terrible DX today. I need to share it.
Cloudflare pages + workers is really sexy. I am currently building a Nuxt3 app on it and was enjoying it so far, even if I known I am using fairly new techs so wasn't expecting to encounter no obstacles. The thing is, I just wanted to stream some text (from open ai models) from my worker, and once I made it work on my dev server, I checked a preview with

wrangler pages dev

wrangler pages dev

: it was not streaming, the response from the open ai APi was outputted all at once. I spent a lot of time, either here or online in the docs, just to realize it was working perfectly fine once deployed! only it is not working when previewing! (Image I found lately in the AI space of the doc) Damned! And I love to think that it's nice to be able to run the app locally in an env close to the production one, a bit like starting a docker container. But it cost me a lot today.

rob•5/13/24, 3:47 AM

https://developers.cloudflare.com/workers/playground/ on this playground is it actually deploying the worker or is it emulating it all like miniflare3 but running in the browser only? So it's like compiled in browser ?

codebam•5/13/24, 7:12 AM

workerd isn't working for me to run vitest tests on fedora 40
https://p.seanbehan.ca/78db3/highlight

codebam•5/13/24, 7:13 AM

followed the instructions. this is my branch: https://github.com/codebam/cf-workers-telegram-bot/commit/49e01fda57e6bd8fa595b9597f559303a82798f5

codebam•5/13/24, 7:15 AM

oh it's because I have AI bindings

codebam•5/13/24, 7:15 AM

I'll make a new wrangler.toml for tests I guess

kindaraffy•5/13/24, 8:33 AM

What is the worker pricing on WebSocket connections (without DO)? Is it the same default pricing (pay for only CPU time, WebSocket pings and WebSocket connections/messages requests)? Are there any surprises I should expect when using a relatively idle WebSocket within a worker?

Kkindaraffy What is the worker pricing on WebSocket connections (without DO)? Is it the same...

Hello, I’m Allie!•5/13/24, 8:51 AM

I don't think you pay for pings, only for incoming requests. Though note that eviction is probably more likely if you don't use a DO

Spuckwaffel•5/13/24, 11:42 AM

hey there, when im using a worker to connect to a database via TCP or HTTP, surely im also billing that time right (cpu time)? Im at the moment on the free tier with some stuff and using D1 always worked within 10ms but im fairly sure when i use http or tcp it will take extremly long

kian•5/13/24, 12:13 PM

You're not using the CPU whilst waiting for a response, that's idle/wall time

vishalsepta•5/13/24, 12:19 PM

Hii there we are facing an issue while uploading Video to R2 Bucket , I encountered it while attempting to upload a video to my R2 bucket from my Android application.

Here's the steps followed

I have two buckets set up in my R2 Bucket - "media" and "video-streams".
Problem:
When I attempt to upload a video using the following API endpoint: "https://api.cloudflare.com/client/v4/accounts/%7B%7BACCOUNT_ID%7D%7D/media", I receive the following error:
{
"success": false,
"errors": [{
"code": 10000,
"message": "Authentication error"
}]
}

Additionally, when I use the API endpoint: "https://api.cloudflare.com/client/v4/accounts/%7B%7BACCOUNT_ID%7D%7D/video-streams", I encounter the following error:

{
"success": false,
"errors": [{
"code": 7003,
"message": "Could not route to /accounts/{{ACCOUNT_ID}}/video-streams, perhaps your object identifier is invalid?"
},{
"code": 7000,
"message": "No route for that URI"
}],
"messages": [],
"result": null
}

request your assistance in resolving these errors so that I can successfully upload videos to my R2 bucket from my Android application.

Abdallah Abis•5/13/24, 3:23 PM

Hey folks,
Is there a way I can do a prefix lookup on KV using wrangler or CF HTTP API?

assume I have keys like:

x-y-z-1
x-y-z-2
x-y-z-3

x-y-z-1
x-y-z-2
x-y-z-3

Is there a way I can get all the keys that start with

x-y-z-

x-y-z-

without specifiying the whole key?

AAbdallah Abis Hey folks, Is there a way I can do a prefix lookup on KV using wrangler or CF HT...

Rich•5/13/24, 3:36 PM

I think you want the list cmd w/ the

--prefix

--prefix

option https://developers.cloudflare.com/kv/reference/kv-commands/#list-1

Cloudflare Docs

KV commands · Cloudflare Workers KV

Manage KV namespaces.

Beny•5/13/24, 7:02 PM

and for API you just add

?prefix=[prefix]

?prefix=[prefix]

to the url

codebam•5/13/24, 9:45 PM

typo here https://developers.cloudflare.com/workers/runtime-apis/context/#passthroughonexception

context

context

codebam•5/13/24, 9:45 PM

should be

ctx

ctx

codebam•5/14/24, 1:00 AM

how can I wrap this in

ctx.waitUntil

ctx.waitUntil

setTimeout(async () => await env.R2.delete(id), 5000);

setTimeout(async () => await env.R2.delete(id), 5000);

codebam•5/14/24, 1:01 AM

setTimeout doesn't return a promise so it won't let me

Jeff Wu | Notional•5/14/24, 2:12 AM

whenever i'm running wrangler devwrangler dev locally and trying to log something out to the console it keeps overwriting the lines so i can't see the logging, is there a way to disable this?

Ꭱ

ᎡᴜᴛʜʟᴇssŦᴀᴄᴛɪᴏɴ•5/14/24, 7:51 AM

Hey yall, so, getting started here with workers and ran an external tool to test my domain. And it's reporting that the Root Cert at the top of the signing chain is long expired for my worker... even though the tool and browsers report all is good... what gives?

kian•5/14/24, 8:29 AM

https://letsencrypt.org/docs/dst-root-ca-x3-expiration-september-2021/

DST Root CA X3 Expiration (September 2021)

Update Feb 05, 2024 It’s been two years, and the Android compatibility cross-sign mentioned below is close to expiring. See our recent blog post for a detailed explanation of the changes coming over the course of 2024.
Update September 30, 2021 As planned, the DST Root CA X3 cross-sign has expired, and we’re now using our own ISRG Root X1 for ...

Kkian https://letsencrypt.org/docs/dst-root-ca-x3-expiration-september-2021/

Ꭱ

ᎡᴜᴛʜʟᴇssŦᴀᴄᴛɪᴏɴ•5/14/24, 8:36 AM

Thanks, I was unaware. And the linked update was particularly helpful good news. Can't wait till June lol I prefer enforcing modern security and though this doesn't actually affect security, supporting outdated OS's is not something I'm interested in.

ddts86•5/14/24, 3:55 PM

what is the limit of size of files a worker can be deployed?

Jadugar_Jaggu•5/14/24, 4:59 PM

Hy , I have two workers A, B I am using cache Api in worker B , and worker B is connected with worker A by service binding, so when worker A is requesting worker B , worker B is not responding with a cached version ?

Jadugar_Jaggu•5/14/24, 5:01 PM

Why is that , and when I am hitting worker B on my browser I can see cached version and "cf-cache": HIT header, but behaviour is not same for service binding

Jadugar_Jaggu•5/14/24, 5:01 PM

Is it known limitation ?

codebam•5/14/24, 6:55 PM

I'm getting [ERROR] Error: Unknown internal error[ERROR] Error: Unknown internal error
when I try to use