Sir ,But some people are saying that this does not use in industry. they suggest use stm32 .Now I

Sir ,But some people are saying that this does not use in industry. they suggest use stm32 .Now I'm confused what should I do please sir guide me .

HHarsh_tiwari Sir ,But some people are saying that this does not use in industry. they sugge...

Umesh Lokhande•5/31/24, 1:53 PM

Hi @Harsh_tiwari just dropped some links in your message box. I'm sure it'll answer all your questions. Best wishes!

UUmesh Lokhande Hi @Harsh_tiwari just dropped some links in your message box. I'm sure it'll ans...

Harsh_tiwariOP•5/31/24, 2:02 PM

Thanku sir

UUmesh Lokhande Hi @Harsh_tiwari just dropped some links in your message box. I'm sure it'll ans...

techielew•5/31/24, 2:47 PM

Can you share here too, @Umesh Lokhande? I'm sure others have similar questions.

Ttechielew Can you share here too, @Umesh Lokhande? I'm sure others have similar questions.

Umesh Lokhande•5/31/24, 2:50 PM

Here are some of my videos explaining the roadmap:
• Roadmap of Embedded Career: https://youtu.be/8P2QkPc5_4c
• Get Entry Level Job or Internship: https://youtu.be/3RN1M7S3sIA
• How to Learn Embedded Systems: https://youtu.be/1pSbkEAW588

YouTubeBINARYUPDATES

Career as a Embedded Systems Engineer- Software and Hardware

Lets explore, Career as a Embedded Systems Engineer. When it comes to Embedded Engineer, there are two choices you can become Embedded Software or Embedded Hardware Engineer.

Embedded Software Engineer are usually focus more on programming and developing software for embedded processors means microcontroller, microprocessors etc. They should ...

YouTubeBINARYUPDATES

How to Get Internship or Entry Level Job in Embedded Systems

If you wonder how to get internship in embedded systems then watch this video. I'll show you 4-steps to secure internship or entry level job in embedded software development. Become an embedded systems professional requires good amount of preparation before you get ready to take up full time job. And best starting point is paid internship where ...

YouTubeBINARYUPDATES

How to Become Embedded Systems Engineer-4 Step Process

In this webinar, we'll be exploring how to become Embedded Systems Engineer in 4-Steps. To pursue career as embedded engineer, one need to create a proper road map which include learning necessary skills like Embedded C, C++, Microcontroller Programming, PCB Design, Electronics Circuit Design etc. But, the one thing very few speaks about is afte...

Ttechielew Hey y'all, see you tomorrow at Office Hours where @ZacckOsiemo is going to be wa...

techielew•5/31/24, 3:05 PM

Alright @here, get ready to get your Zephyr on! https://app.livestorm.co/devheads-community/devheads-weekly-office-hours-1/live?s=e868f8f7-cefa-4481-93c7-507f65868699

DevHeads Weekly Office Hours | ThroughPut Marketing

Ttechielew Alright @here, get ready to get your Zephyr on! https://app.livestorm.co/devhead...

techielew•5/31/24, 4:05 PM

Here's @ZacckOsiemo 's code from today's OH session: https://github.com/DevHeadsCommunity/ZephyrFirstImpressions.

Thanks Zacck! Recording will be available soon

Ttechielew Here's @ZacckOsiemo 's code from today's OH session: https://github.com/DevHeads...

nour_oud•5/31/24, 4:07 PM

Thank you @ZacckOsiemo

ZacckOsiemo•5/31/24, 4:07 PM

No worries @nour_oud keen for more!

Ttechielew Here's @ZacckOsiemo 's code from today's OH session: https://github.com/DevHeads...

nour_oud•5/31/24, 8:23 PM

For those unable to attend today's event, you can now watch it on YouTube via the link below.

https://youtu.be/3KYX3OVKLl4

YouTubeDevHeads

DEVHEADS WEEKLY OFFICE HOURS: 05/31/2024—Zephyr First Impressions w...

Here's @ZacckOsiemo 's code from today's OH session: https://github.com/DevHeadsCommunity/ZephyrFirstImpressions.

We hope to see you in the server! https://discord.gg/DevHeads.

#Zephyr #FirstImpressions #TechReview #TechDemo #OperatingSystems #IoT #TechCommunity #EmbeddedSystems #ZephyrOS #ZacckOsiemo #Tech #Technology #TechNews #Innovation #T...

BOTTON, L F•6/1/24, 2:02 PM

Hi!

techielew•6/2/24, 2:07 PM

Alright @Event Pings it's almost time for another Engineering Hour with @Umesh Lokhande where we'll be continuing our exploration of embedded protocols. It starts in less than an hour at 15:00 UTC.

Join us: https://discord.gg/vm2xnajT?event=1244310733307514891

techielew•6/2/24, 2:16 PM

Welcome to the server, @andrea @MrIDK @VladP @BOTTON, L F, @Medha Jain, @Rusty-1! We're happy you're here and verified so you can join the collab! If you're looking familiarize yourself with the group feel free to ping the @Mod @Admin or any of the @lead roles and we'll help you find your way to the right devs!

techguy•6/2/24, 3:11 PM

God's Only Monster•6/2/24, 3:20 PM

Don't know if it's the right place to chat or not, but is this lecture getting recorded?

Ttechguy Hi

techielew•6/2/24, 4:09 PM

Hi MegaZron, welcome!

GGod's Only Monster Don't know if it's the right place to chat or not, but is this lecture getting r...

techielew•6/2/24, 4:09 PM

Yes, we'll make it available.

Ttechguy Hi

techielew•6/2/24, 4:11 PM

Let us know what you're working on and looking to learn

Accur4te•6/2/24, 4:49 PM

how to get started with atmel atemga 16 programming ?

Eelectro_coco any one who is familiar with CMAKE i need some help

techielew•6/2/24, 9:23 PM

Hey @electro_coco did you ever get the help you needed? If you put your specific question in the #middleware-and-os channel it won't get lost in the flow so easily and I follow up on it. If you give me more info about what you need help with I can create one for you. Hope you're having a great weekend.

AAccur4te how to get started with atmel atemga 16 programming ?

techielew•6/2/24, 9:24 PM

Is your question just looking for resources?

wafa_ath•6/3/24, 6:32 AM

Hi everyone,

As electronics enthusiasts, we should understand how chips are made. I found this educational video that I think you will find helpful.
https://youtu.be/dX9CGRZwD-w?si=K-CFQwSphYuV_YFd

YouTubeBranch Education

How are Microchips Made? 🖥️🛠️ CPU Manufacturing Process Steps

Go to http://brilliant.org/BranchEducation/ for a 30-day free trial and expand your knowledge. Use this link to get a 20% discount on their annual premium membership.

Integrated Circuits, CPUs, GPUs, Systems on a Chip, Microcontroller Chips, and all the other different types of microchips are the brains of all the devices and technology that we...

Wwafa_ath Hi everyone, As electronics enthusiasts, we should understand how chips are mad...

Marvee Amasi•6/3/24, 2:16 PM

We all know how tiny and powerful computer chips are these days, do you think current microchip fabrication methods can keep pace with the growing demand for processing power and miniaturization?

MMarvee Amasi We all know how tiny and powerful computer chips are these days, do you think cu...

wafa_ath•6/3/24, 3:51 PM

the industry is exploring new materials, 3D architectures, and quantum computing, so it can keep up with new technologies and demand

Wwafa_ath the industry is exploring new materials, 3D architectures, and quantum computing...

Marvee Amasi•6/3/24, 4:45 PM

Those new materials and 3D stuff are mind-blowing , Do you think there are any challenges we might face as we move towards these new fabrication methods? For me, with these crazy small and powerful chips, they will become even more expensive to produce, and less affordable

MMarvee Amasi We all know how tiny and powerful computer chips are these days, do you think cu...

Joseph Ogbonna•6/3/24, 5:29 PM

The demand on microchip fabrication is evolving drastically as the miniaturization of chip evolving. Currently TSMC it's the is leading manufacturer of microchip, they are able to produce transistor of upto 2nm(nano meter). For now I think this is the smallest we have reached though there some research going on on how to go further.

MMarvee Amasi Those new materials and 3D stuff are mind-blowing , Do you think there are any c...

wafa_ath•6/3/24, 6:48 PM

Emm , i think the opposite with time it will be more available

MasterCtrl•6/4/24, 1:57 AM

Hi All, New here. Ideal career trajectory, Cybernetics. Mostly tinkering with AI NLP at present. Strong interest and some experience with microcontrollers, sensors, radio, motor control, conditional logic, Python. Mid-Career. Best suited for DevOps Admin.

MMasterCtrl Hi All, New here. Ideal career trajectory, Cybernetics. Mostly tinkering with AI...

techielew•6/4/24, 2:44 AM

Hi @MasterCtrl, welcome to the server! Happy to have you. Any embedded/edge AI in your repertoire?

techielew•6/4/24, 2:45 AM

Hi @Event Pings! Lots going on, this time outside of the server! Tomorrow I'm modding a virtual event on the PICMG COM-HPC Mini hardware specification, which defines open Linux-class computers/SBCs for professional development. If you're free around 14:00 UTC, stop by and check it out at:
* LinkedIn https://www.linkedin.com/events/com-hpcminiacademy7201274918070542336/theater/
* Virtual event platform: https://app.livestorm.co/picmg/com-hpc-mini-academy-helping-technologists-advance-edge-computing-for-ai-converged-networks-and-beyond (if you've been to Office Hours, you'll be familiar with this

)

COM-HPC Mini Academy | LinkedIn

Advances in AI and converged network rollouts mean edge workloads need a sustained balance of high-end compute, low-latency data transmission, and managed power consumption. Business decision makers and system architects deploying these workloads must ensure their edge infrastructure can be implemented quickly, withstand the rigors of field envi...

PICMG

COM-HPC Mini Academy: What’s New in COM-HPC? | PICMG

Ttechielew Hi @Event Pings! Lots going on, this time outside of the server! Tomorrow I'm mo...

techielew•6/4/24, 2:50 AM

And speaking of Office Hours, this Friday we're going to be discussing the role/use of AI/ML/NLP in development. I still have to create the event page so hold tight while I wrap this PICMG event.

The AI/ML in development topic was a member request and we keep getting asked to open an AI channel. So this will be a good opportunity to vote for that initiative with your presence!

PeterJames•6/5/24, 1:07 AM

Hi for the 1st time, glad to be with you all

aniketgupta2043•6/5/24, 8:46 AM

Hi, do anyone know how to set up private APN settings on a 4G module. I am new to this and recently my company provided me with an M2M sim and I am not able to connect to my AWS server using this sim . Earlier I was using a 4G sim and everything worked fine.
But now I am not aware what may be the issue.

techielew•6/5/24, 12:34 PM

Hi @aniketgupta2043, welcome. This is a good question for our @Edge Networking folks, and specifically @InsightMike may be able to provide some perspective. What are you building?

PPeterJames Hi for the 1st time, glad to be with you all 🙏❤️

techielew•6/5/24, 12:34 PM

Welcome @PeterJames. You identify as a cloud dev. What brings you to DevHeads? Any IoT projects you're currently working on?

Aaniketgupta2043 Hi, do anyone know how to set up private APN settings on a 4G module. I am new t...

Julien•6/5/24, 12:36 PM

look at your modem documention and use the AT+CGDCONT command to set the APN

Ttechielew Hi @aniketgupta2043, welcome. This is a good question for our @Edge Networking f...

aniketgupta2043•6/5/24, 12:37 PM

Hi techielew, I am working on building a 4G Remote Monitoring System for Power Systems in my company.

JJulien look at your modem documention and use the AT+CGDCONT command to set the APN

aniketgupta2043•6/5/24, 12:37 PM

Thanks but I've already done that but still I am not able to connect to my server.

techielew•6/5/24, 12:38 PM

Hi @Event Pings,
Another episode in our protocol series is this Sunday where @Umesh Lokhande will be walking us through SPI driver development. Join us at 15:00 UTC to get some foundational concepts under your belt and ask questions that will move your design forward!

All happening in the https://discord.com/channels/1130679493799977062/1212286094830477323 channel.

Navadeep•6/6/24, 3:28 AM

Hi! Have anyone tried yocto build in Windows Subsystem for Linux(WSLv2)? The yocto documentation says it's compatible but not verified. I was able to create a build for MPFS_DISCO_KIT but don't see it booting up...

Is it that if the image is created, it means it worked on WSL or can it end up creating an incomplete linux image?
@MCU, MPU & Firmware

NNavadeep Hi! Have anyone tried yocto build in Windows Subsystem for Linux(WSLv2)? The yoc...

techielew•6/6/24, 3:35 AM

@Middleware & OS

Ghosty•6/6/24, 5:48 AM

Hi, till now i have only worked on a couple of iot related projects on web end. Trying to somehow jump into firmware.

GGhosty Hi, till now i have only worked on a couple of iot related projects on web end. ...

ZacckOsiemo•6/6/24, 5:51 AM

Yeah its a hard jump, but not an impossible one. Find low hanging fruit and attack.

Ghosty•6/6/24, 5:51 AM

yes!

ZZacckOsiemo Yeah its a hard jump, but not an impossible one. Find low hanging fruit and atta...

Ghosty•6/6/24, 5:55 AM

You ever worked with web serial api?

Ttechielew And speaking of Office Hours, this Friday we're going to be discussing the role/...

techielew•6/6/24, 5:55 AM

As promised folks: https://discord.gg/devheads?event=1248153096274837534

ZZacckOsiemo Yeah its a hard jump, but not an impossible one. Find low hanging fruit and atta...

Ghosty•6/6/24, 5:55 AM

I am trying to communicate with the device using Web Serial API. I send a command and the device will provide me with some information. So far reading the commands has been successful in case of Audrino Uno board, but when using ESP32 im not able to read the command from serial api. Any suggesstions??

GGhosty You ever worked with web serial api?

ZacckOsiemo•6/6/24, 5:56 AM

I don't think I have heard about web serial before.

Ghosty•6/6/24, 5:56 AM

ah alright.

GGhosty I am trying to communicate with the device using Web Serial API. I send a comman...

ZacckOsiemo•6/6/24, 5:57 AM

Hmmm ok this I can help with what specific issue are you running into?

ZZacckOsiemo Hmmm ok this I can help with what specific issue are you running into?

Ghosty•6/6/24, 5:58 AM

well the ESP32 CAM wont read the commands from web, but the audrino uno does. But using the Audrino IDE the same code works perfectly for ESP32-CAM

Sir ,But some people are saying that this does not use in industry. they suggest use stm32 .Now I

Similar Threads

Similar Threads

Similar Threads