That is all correct to the best of my understanding. My answer above about including a benign volati

That is all correct to the best of my understanding. My answer above about including a benign volatile function is the current best solution for cache busting point 3. We expect to add more polish on that front, though it isn't our highest priority at this time.

AAJR That is all correct to the best of my understanding. My answer above about inclu...

Isaac McFadyen•6/5/24, 3:39 PM

Ah completely missed the volatile function part - good to know.

IIsaac McFadyen So these are the cache layers I assume you have (correct me here if I'm wrong): ...

Paul•6/5/24, 4:06 PM

Thanks for the great write up!

IIsaac McFadyen Your original question was about whether a query in Hyperdrive would auto-cache-...

Matt Silverlock•6/5/24, 10:04 PM

I do think some things are being mixed up here:

Hyperdrive’s cache is only specific to Hyperdrive (per config ID). The
```
maxage
```
```
maxage
```
in Hyperdrive dictates that caches maximum TTL per unique query. It’s not a CDN cache and doesn’t cache any results in the browser.
```
maxage
```
```
maxage
```
is just a common name for a TTL-based cache configuration setting.
You can also use Cloudflare’s CDN cache from a Worker or Pages app, but there is no intersection with Hyperdrive (unless you actively choose to insert things into it).

MMatt Silverlock I do think some things are being mixed up here: 1. Hyperdrive’s cache is only s...

Isaac McFadyen•6/5/24, 10:05 PM

Ah, think you're right - apologies, thought this was referring to the

maxage

maxage

in the

Cache-Control

Cache-Control

header.

Muudka•6/5/24, 11:48 PM

Hi, am a bit confused about hyperdrive, at the moment i have a node application that is deployed to aws lamda behind api gateway ,
I am using postgres db with prisma orm,
I have set up hyperdrive and run some test, how can I integrate it into my lambda deployment

MMuudka Hi, am a bit confused about hyperdrive, at the moment i have a node applicati...

Matt Silverlock•6/6/24, 1:57 AM

Where is your database? Hyperdrive is currently focused on making it faster to connect (and query) your database from Workers.

If you’re using Lambda and Aurora in the same region, it won’t make much sense here.

ramnivas•6/6/24, 2:01 AM

I have seen mentions in this/workers forum that Hyperdrive's

id

id

is not a secret, but I didn't find that mentioned in the documentation. It will be beneficial to have that mentioned officially.

MMatt Silverlock Where is your database? Hyperdrive is currently focused on making it faster to c...

Muudka•6/6/24, 6:34 AM

I am using postgtres on Neo.tech, does worker only work within the worker and how can it be incorporated into my code.
I am using prisma as ORM

MMuudka I am using postgtres on Neo.tech, does worker only work within the worker and ho...

thomasgauvin•6/6/24, 3:23 PM

@Muudka are you using AWS Lambda or Cloudflare Workers (I see mentions of both in this thread)? Which database vendor are you using/is it AWS RDS/Aurora?

Muudka•6/6/24, 3:26 PM

@thomasgauvin I am using AWS lambda behind api gateway with Postgres on neo.tech serverless db.

katopz•6/8/24, 3:28 AM

Do hyperdrive also work with PostgresML?

Rramnivas That will be awesome. Thank you!

AJROP•6/10/24, 4:58 PM

Posting my response a little more publicly, for visibility's sake.

After looking into it, the way tokio-postgres implements prepared statements and the extended query protocol is rather different than how our supported drivers do it. We will work on adding support for extended queries in that driver, but it will not be very soon (lots of other big features we've committed to first). For the meantime, we recommend using simple queries with that driver. I'll check our docs and make sure that they offer similar guidance.

Note that while @ramnivas did see better behavior with caching, that's somewhat incidental and you're likely to still hit bugs using extended queries in tokio-postgres even with caching enabled.

Thank you @ramnivas for the excellent write-up!

ramnivas•6/10/24, 5:54 PM

@AJR Thanks for the update.

Meanwhile, for those who want to not use

simple_query

simple_query

, take a look at our fork (the

exograph

exograph

branch), which supports

query_with_type_params

query_with_type_params

that works well with Hyperdrive.

https://github.com/exograph/rust-postgres/tree/exograph

GitHub

GitHub - exograph/rust-postgres at exograph

Native PostgreSQL driver for the Rust programming language - GitHub - exograph/rust-postgres at exograph

thomasgauvin•6/11/24, 8:59 PM

@Olivier F @Florent funny you should ask! this is one of our main things in progress currently, we should setup a meeting to talk it through, get some of the details from your side and get your early feedback. These are my availabilities https://calendar.app.google/ynRoYiJudGqyGPRN9

Appointments

ramnivas•6/12/24, 5:31 PM

Check out our latest blog that makes use of Hyperdrive to improve latency:

https://exograph.dev/blog/cloudflare-workers

Exograph at the Edge with Cloudflare Workers | Exograph

We are excited to announce that Exograph can now run as a Cloudflare Worker! This new capability allows deploying Exograph servers at the edge, closer to your users, and with lower latency.

DanielZero•6/13/24, 5:05 PM

I use postgres.js (latest version 3.4.4), hyperdrive and supabase. Every now and then a query fails due to

CONNECTION_CLOSED

CONNECTION_CLOSED

Disabling the hyperdrive cache didn't help and I can't find any open issue on that topic in the postgres.js repo. Am I the only one?

Isak•6/13/24, 10:19 PM

Why does query latency fluctuate so much? It's normally around 60 ms but sometimes down to 10 ms for short periods.

IvanLisz•6/16/24, 4:44 PM

(pages + hyperdrive) question: Can i separate prod and development or do i need two accounts?

IvanLisz•6/16/24, 9:27 PM

"This repository is being used for a Cloudflare Pages project on a different Cloudflare account." Nop, not even that.

IvanLisz•6/16/24, 9:45 PM

forked and works

IIvanLisz (pages + hyperdrive) question: Can i separate prod and development or do i need ...

Walshy•6/16/24, 11:26 PM

You can use the production and preview environments, e.g.

[env.production]
[[env.production.hyperdrive]]
binding = "HYPERDRIVE"
id = "id-1"

[env.preview]
[[env.preview.hyperdrive]]
binding = "HYPERDRIVE"
id = "id-2"

[env.production]
[[env.production.hyperdrive]]
binding = "HYPERDRIVE"
id = "id-1"

[env.preview]
[[env.preview.hyperdrive]]
binding = "HYPERDRIVE"
id = "id-2"

Docs: https://developers.cloudflare.com/pages/functions/wrangler-configuration/#configure-environments

IvanLisz•6/18/24, 7:27 PM

but this means that I being a developer can switch my preview branch hyperdrive binding and access the production database, right?

kindaraffy•6/20/24, 10:04 PM

Hi, I believe you could run drizzle with both postgres-js and node-postgres drivers, or does this piece of the documentation relate to something else entirely? https://developers.cloudflare.com/hyperdrive/configuration/connect-to-postgres/#supported-drivers

Cloudflare Docs

Connect to PostgreSQL · Hyperdrive

Hyperdrive supports PostgreSQL and PostgreSQL-compatible databases, popular drivers and Object Relational Mapper (ORM) libraries that use those …

kindaraffy•6/20/24, 10:04 PM

https://orm.drizzle.team/docs/get-started-postgresql#supabase Step 3 shows how you could use the Postgres js driver with drizzle.

Drizzle ORM - PostgreSQL

Drizzle ORM is a lightweight and performant TypeScript ORM with developer experience in mind.

Kkindaraffy Hi, I believe you could run drizzle with both postgres-js and node-postgres driv...

Sam•6/21/24, 12:48 PM

I'm using drizzle myself with node pg (https://www.npmjs.com/package/pg). Everything is working correctly, or is that not your question?

kindaraffy•6/21/24, 3:12 PM

No I was just pointing out that the docs may potentially be misleading when it mentions drizzle only works with node postgres when you can run it using the recommended postgres-js client.

Kkindaraffy No I was just pointing out that the docs may potentially be misleading when it m...

AJROP•6/21/24, 4:04 PM

Ah good catch, thank you!

Elektra•6/24/24, 4:10 PM

Is hyperdrive down?

Elektra•6/24/24, 4:11 PM

For the past 40 to 50 minutes. Out of nowhere I get cannot get it...failed to aquire a connection from the pool.

Elektra•6/24/24, 4:11 PM

Nothing changed. I haven't touched code for the last 6h ...

Elektra•6/24/24, 4:12 PM

All was working...and I can connect directly to the db.

AJROP•6/24/24, 4:12 PM

Taking a look

Elektra•6/24/24, 4:12 PM

Thank you AJR

AJROP•6/24/24, 4:13 PM

What's your hyperdrive ID?

AJROP•6/24/24, 4:13 PM

I'm still seeing normal global traffic levels, no elevated error rates.

Elektra•6/24/24, 4:14 PM

sent DM

Divyendu•6/26/24, 12:15 PM

Does hyperdrive work with Cloudflare pages or just workers for now?

Walshy•6/26/24, 12:18 PM

it's supported on Pages

Divyendu•6/26/24, 12:22 PM

Thanks, I get this error in the build logs, I have the binding defined in my wrangler.toml. Investigating

. I asked the question becuase I didn't see the binding in pages UI, but good to know that it works!

Divyendu•6/26/24, 4:11 PM

Aha, got it working, for anyone who runs into this, in the end it was simpler than I thought, just need

compatibility_flags = [ "nodejs_compat" ]

compatibility_flags = [ "nodejs_compat" ]

wrangler.toml

wrangler.toml

and then normal functions directory just works™. It took me a while to figure it out because most of the community resources, gh issues etc are slightly outdated and took me a while to understand that

node_compat = true

node_compat = true

is a build time thing not supported by pages and likely won't be (as it is legacy) and

compatibility_flags

compatibility_flags

is the way to go!

Divyendu•6/27/24, 10:18 AM

I am not sure if this fix should happen in Cloudflare or Remix but I need to provide a "fake" env var "WRANGLER_HYPERDRIVE_LOCAL_CONNECTION_STRING_HYPERDRIVE" for

remix vite:build

remix vite:build

to succeed in CI.

I think this should be fixed in Cloudflare (it should detect that it is running in the CI and not fail with the "when running locally" message)

Matt Silverlock•6/28/24, 2:43 PM

If you're interested in how Hyperdrive works under the hood, @AJR just published a blog: https://blog.cloudflare.com/postgres-named-prepared-statements-supported-hyperdrive

The Cloudflare Blog

Supporting Postgres Named Prepared Statements in Hyperdrive

Hyperdrive (Cloudflare’s globally distributed SQL connection pooler and cache) recently added support for Postgres protocol-level named prepared statements across pooled connections. We dive deep on what it took to add this feature.

kindaraffy•6/29/24, 11:54 AM

Is there a way to specify read replicas for a hyperdrive configuration?

thomasgauvin•6/30/24, 11:53 PM

Not currently possible, how many replicas do you have? Which db provider are you using?

That is all correct to the best of my understanding. My answer above about including a benign volati

Similar Threads

Similar Threads

Similar Threads