I wanted to get the MCG as well. Has been out of stock for at least three months. Don't know if it i
I wanted to get the MCG as well. Has been out of stock for at least three months. Don't know if it is even made anymore.
DDid they hint on making something new?
FNot that I have seen. The alternative Virpil MongoosT has been out of stock for the same time. Went with the Constellation 
NIt's just EU woes isn't it
NOther regions just fine
DI thought of going with virpil prime one but not sure since I dont have any experience woth virpil and I dont like the lights on it
DYeah, iirc NA store is just fine
BCan turn those lights off
BWell, I'd think
DI thought so but still not sure how it compares to VKB MCG Ultimate. Man I regret selling mine
FOn the Rhino the lights don't even turn on. It is a great grip. Not the best looking but really well made! 
DDefinitely not the best looking
Nwhy'd you sell
DAt that time I had 2 setups. Simple Simpit and VKB Gunfighter 3 and MCG Ultimate and I thought that Simpit one would be better. That was a mistake, a big one
Nwas that the mig29 replica stick? it seems his page has been dead for a long time
Ti want to build a small homecockpit with VR (since i dont have enough space at my office desk at home). I use the quest 3 so i can play DCS without it being attached to the computer.. but how would i do that with my diy joystick? Is there something like usb via ethernet or similar that i could use that that would work without performance problems? (i do know, it exists, but i am more interested in if it would actually work with a Joystick)
DThats the one. Back when I ordered mine he was not really eager to make it. Took him way more than it should, bunch of messages ignored etc. all in all wouldnt really recommend. And thats before we even start talking about the product itself…
Ndamn! i thought it looked like a nice product...I guess appearances can be deceiving
Nbut now you're on the road to rhino, so everything worked out 
DThat were my thoughts aswell. At first it seemed fine but I guess that was just the wffect of a new toy. After a while I realised how shit it actually is. One example is, sometimes recentering the stick is almost impossible so I run like a 6 units for the deadzone which makes refueling an overcorrecting battle. Sometimes the aircraft just suddenly pulls to one side for whatever reason. Paint peeling off, loose screws etc…
DOnly thing i regret is not doing it sooner
DLike when the F4 was announced
![FuturPaladin [FR/2A]☨](https://cdn.discordapp.com/avatars/408735665916870657/1d7f7fb0842510dda4e1f46eeb26285e.webp?size=40)
FYou can
Fis there a repository of different configs for different applications somewhere?
FI’ve just got my Rhino. I don’t see a setting for engine vibrations in the config software. Is it possible? The Brunner software allows it, as does other FFB software.
CCheck out the TelemFFB app. This allows additional effects for the rhino.
WHey guys, can someone confirm something for me as I’m a little confused on the ordering process. I’m about three months in on the list for the prebuilt Rhino, but I’ll want to buy a few accessories with it at the time but I don’t think I selected anything but the Rhino when I did the form, is that going to be a problem later or will I get a chance to select them when the time comes? Also, how often is the info bot updated with the number of orders, anyone know?
AI don't think it's going to be an issue, you make the order when your Rhino is ready to go
![SR-F_Winger_[73]_David](https://cdn.discordapp.com/avatars/98037306870472704/f924b51d2e4486c1eb873c2f4fb7f6a3.webp?size=40)
SHey Folks. For everyone that might BE looking for a DIY Kit. I reduced the price of my Kit.
Pm for Details If you're interested. I have 3 Kits in Stock ready to Ship.
So If you want a Rhino you can have one in around 2 weeks (including Delivery time of the Motor Kit from @walmis
My Kit comes mostly preassembled. All Electronics are pre crimped, Gimbal is completely preassembled. All screws acome packed and labeled. Fans and Potentiometers are also preassembled. Takes a few hours of time to Finish the assembly with Basic Tools. No soldering required.
Pm for Details If you're interested. I have 3 Kits in Stock ready to Ship.
So If you want a Rhino you can have one in around 2 weeks (including Delivery time of the Motor Kit from @walmis
My Kit comes mostly preassembled. All Electronics are pre crimped, Gimbal is completely preassembled. All screws acome packed and labeled. Fans and Potentiometers are also preassembled. Takes a few hours of time to Finish the assembly with Basic Tools. No soldering required.
SWorldwide shipping is possible. Kit weights around 5 Kg packed. So shipping to anywhere is quite reasonable.
V:package: 
RHINO #0579 Has Shipped!
RHINO #0579 Has Shipped!V:package: RHINO #0580 Has Shipped!
RHINO #0580 Has Shipped!V:package: 
RHINO #0581 Has Shipped!
RHINO #0581 Has Shipped!V:package: RHINO #0582 Has Shipped!
RHINO #0582 Has Shipped!DWalmis is on a roll today! 
DHey! What’s the state of FFB rudder pedals these days? Is there going to be a year long waitlist for those as well? I’d like to sign up then
DI’m not interested in the DIY ones
SWell that's a thought, can we use the kit to create FFB pedals? Maybe use the MFG Crosswinds as a base.....Where are my DIYers?
AI would imagine yes
Aat some point there was talk about a simple drop-in kit for mfgs, but it's been a while since latest updates
SThat would be awesome! It's a great set of pedals, but FFB would honestly put them in end-game territory
SI mean, they kinda are for me anyway, but....
DIf it was a simple upgrade path to an existing rudder pedal set then I’d be interested too. I just cannot build from scratch
SAgreed. If you don't have these already, MFG makes a great set of rudders. They are pretty customizable and I imagine that adding FFB wouldn't be so hard.
https://mfg-sim.com/rudders/
https://mfg-sim.com/rudders/
MFG
Feel in absolute control with proven MFG Crosswind rudders, tailored models for any sim, hydraulic damper and more,, thrusted by 20k+ simmers
DNah I’m just rocking the Logitech ones for now. Waiting on an FFB solution
W@Hiob is also doing a MFG mod 
https://discord.com/channels/965234441511383080/1145651561578647582/1250469350935367722
https://discord.com/channels/965234441511383080/1145651561578647582/1250469350935367722AI think there was also some kind of a preorder/preinterest sort of thing going on, check it out if interested
CWalmis, I know it been asked a few times and haven't seen an answer. But are your mfg mod kits still in the works? I know there is the preorder list, it just seems radio silent since the preorder list went out. Don't need a release date just wondering if it's still an ongoing project. Thanks!
RNew haptic software from https://www.youtube.com/watch?v=Mpm1yxmYXZI
YouTuberkApps
Download SimHaptic v2 from our website at rkApps.shop
From the creators of FSRealistic and XPRealistic, with support for X-Plane, MSFS, and now DCS, immerse yourself in a world of true realism with thrilling haptic feedback. Whether you're flying a helicopter, passenger jet, general aviation or fighter jet, experience lifelike vibrations tailor...
From the creators of FSRealistic and XPRealistic, with support for X-Plane, MSFS, and now DCS, immerse yourself in a world of true realism with thrilling haptic feedback. Whether you're flying a helicopter, passenger jet, general aviation or fighter jet, experience lifelike vibrations tailor...
RI’d love to have teleffb became to interact with seat shakers or butt kickers all within. Same software. Versus having to use 2-3 different programs.
SVery cool! thanks