Agreed. If you don't have these already, MFG makes a great set of rudders. They are pretty customiza

Agreed. If you don't have these already, MFG makes a great set of rudders. They are pretty customizable and I imagine that adding FFB wouldn't be so hard.
https://mfg-sim.com/rudders/

MFG

MFG flight sim PC Rudder pedals - most immersive simpit addon - MFG

Feel in absolute control with proven MFG Crosswind rudders, tailored models for any sim, hydraulic damper and more,, thrusted by 20k+ simmers

SSamNFTY Agreed. If you don't have these already, MFG makes a great set of rudders. They ...

Dentedend10•6/14/24, 2:09 PM

Nah I’m just rocking the Logitech ones for now. Waiting on an FFB solution

walmis•6/14/24, 2:10 PM

@Hiob is also doing a MFG mod

https://discord.com/channels/965234441511383080/1145651561578647582/1250469350935367722

AndyHill•6/14/24, 3:00 PM

I think there was also some kind of a preorder/preinterest sort of thing going on, check it out if interested

Wwalmis @Hiob is also doing a MFG mod 🙂 https://discord.com/channels/965234441511383080...

Col. Sanders•6/14/24, 3:11 PM

Walmis, I know it been asked a few times and haven't seen an answer. But are your mfg mod kits still in the works? I know there is the preorder list, it just seems radio silent since the preorder list went out. Don't need a release date just wondering if it's still an ongoing project. Thanks!

Reed•6/14/24, 4:05 PM

New haptic software from https://www.youtube.com/watch?v=Mpm1yxmYXZI

YouTuberkApps

SimHaptic v2 - DCS Support

Download SimHaptic v2 from our website at rkApps.shop

From the creators of FSRealistic and XPRealistic, with support for X-Plane, MSFS, and now DCS, immerse yourself in a world of true realism with thrilling haptic feedback. Whether you're flying a helicopter, passenger jet, general aviation or fighter jet, experience lifelike vibrations tailor...

Reed•6/14/24, 4:06 PM

I’d love to have teleffb became to interact with seat shakers or butt kickers all within. Same software. Versus having to use 2-3 different programs.

Wwalmis @Hiob is also doing a MFG mod 🙂 https://discord.com/channels/965234441511383080...

SamNFTYOP•6/14/24, 4:48 PM

Very cool! thanks

FarFutureFox•6/14/24, 5:46 PM

Which are the best DCS modules for the Rhino? I’m most interested in helos, but fixed wing is fine too! I understand only certain modules support FFB natively.

FFarFutureFox Which are the best DCS modules for the Rhino? I’m most interested in helos, but ...

Ice•6/14/24, 6:09 PM

Honestly, they all have a unique feel which is awesome. The F-4E is fantastic as it was deisgned with force feedback in mind.

Ice•6/14/24, 6:09 PM

Helicopters are some of my favorite as well.

Ice•6/14/24, 6:10 PM

The F-4E really shines as a great one for fixed wing though.

IIce Honestly, they all have a unique feel which is awesome. The F-4E is fantastic as...

Diverzant•6/14/24, 6:46 PM

Comments like these since I am addicted to the F4 make me sure to wait out on the Rhino however long it takes!

DDiverzant Comments like these since I am addicted to the F4 make me sure to wait out on th...

SamNFTYOP•6/14/24, 6:52 PM

You're addicted to the F-4? I wouldn't have known (highly sarcastic, lookin at you Robin Olds)

Touch_Of_Legend•6/14/24, 6:53 PM

Warbirds as well

Nothing like that centrifugal force on take off (old school you neutralize with hard rudder until you get moving)

The Rhino shines on all modules..

You can’t even go back to flying the Hornet without the rumble effects it feels like a dead stick when you grab them and they aren’t grabbing you back (so to speak)

So the Rhino changes the game for Warbirds up to the 70’s era or so

Touch_Of_Legend•6/14/24, 6:55 PM

I do have the Viper but I’ve been so busy building and DIY and the next thing and the next that I haven’t even had the seat time to really see what the Rhino can do for modern (FBW).

The Telem still works so you can get gunfire effects and all that randomized stuff I assume (even though the real life f16 is the sense stick)

Touch_Of_Legend•6/14/24, 6:56 PM

So really.. Rhino is the best thing even for some space game that isn’t even pushing effects you can set it to push effects… like maybe it can do explosions or warp or who knows… I have no idea but it’s THAT crazy and capable

Touch_Of_Legend•6/14/24, 7:00 PM

So worst comes to worst… it’s the absolute smoothest gimbal you could ever buy….

Instead of measuring itself with pots… it actually measures rotations inside the motor

It’s soooooo damn smooth it’s like buttery soft movements that are sooo fluid it’s like real life hydrolic…

(That’s the anti cogging at work btw)

So honestly it’s the best “base” you can get.

The other bases have to change springs and profiles when for the Rhino you can do it all in the software…

So again.. even if you turn off every single FFB.. it’s the very best base you could buy

(And that’s because it’s totally NOT like the other bases)

SamNFTYOP•6/14/24, 7:01 PM

@walmis You gotta get @Touch_Of_Legend on your payroll for marketing

Touch_Of_Legend•6/14/24, 7:01 PM

When you turn ON the FFB….

Now not only is her gimbal and sensors (by far) superior.

Now she talks back and hold tight… more than one person here has got bit back because she’s a rhino she don’t play lol

(Watch your junk)

Oneill•6/14/24, 7:03 PM

Anyone in west or south wales want to earn some cash setting up my sim ?
I need the whole fucking thing sorted out.

OOneill Anyone in west or south wales want to earn some cash setting up my sim ? I need ...

Touch_Of_Legend•6/14/24, 7:05 PM

Yeah bro I wish I could help.

You could also (should also) reach out to car sims folks local on FB or local.

Reason is because car sim folks are just as crazy and setting up “stuff” is basically the same.

Touch_Of_Legend•6/14/24, 7:05 PM

For info we live in the USA so haha

Oneill•6/14/24, 7:06 PM

How about a free holiday and £59 lol.

Touch_Of_Legend•6/14/24, 7:07 PM

Hahaha plus car sim folks also know about FFB. The top tier racing stuff is also FFB systems and hard hard core stuff apparently

SSamNFTY You're addicted to the F-4? I wouldn't have known (highly sarcastic, lookin at y...

Diverzant•6/14/24, 7:48 PM

Hahahha yeah, I know its hard to spot

Littlesack•6/14/24, 11:38 PM

Is there any harm in leaving the base powered on for long periods? Or should I always disable it when not in use?

Ice•6/14/24, 11:52 PM

I always turn mine off and unplug it after use because I am overly cautious. I'm always worried about somehow hitting the cable and breaking it off or damaging the port.

Scarlet•6/15/24, 12:32 AM

It shouldn't hurt if to be powered, but also won't hurt to be unpowered

LLittlesack Is there any harm in leaving the base powered on for long periods? Or should I a...

Touch_Of_Legend•6/15/24, 8:17 AM

Due to the fact it can move when games start before you put your hand on the stick..

And can whack the end stops pretty hard

You should ALWAYS power down the unit with the Emergency Stop.

When powering up the unit grab and hold the stick steady so as to avoid it accidentally taking a hard smack against the end stops.

Mine has never done it.. my Rhino is tame like a puppy but I also never turn it above 60%

You can read stories of dudes who got whacked in the junk or whose sticks smack the tables or whatever is around.

So… Hold stick the whole time unless in game and on trim.

Hold stick while powering on the unit and hold the stick when you power it down.

No need to unplug as the emergency stop is a physical stop switch so the power is cut.

Unplugging is good practice and will extend the life of the PSU but it’s no big deal when using a real switch like the stop switches.

No amount of power can jump those switches so you good to go.

But yeah… hold it before you start and never ever leave the stop switch open.

Stop switch… now add HOTAS cover and she’s safe

Scarlet•6/15/24, 8:40 AM

I'm curious about the E stop killing power to EVERYTHING and not just the motor drivers

SScarlet I'm curious about the E stop killing power to EVERYTHING and not just the motor ...

Touch_Of_Legend•6/15/24, 9:31 AM

Well technically the board is powered by the USB but the motors are what make the stick jump

So I should say the E stop kills all power to the motors but the unit can still be plugged in and mess with the software that’s the safest way to experiment with settings

That’s for keeping me honest

Touch_Of_Legend•6/15/24, 9:34 AM

The same ideas apply though..

Just be sure when you twist the stop switch and turn it on you’re holding the stick.

Otherwise… you might get whacked

TTouch_Of_Legend Well technically the board is powered by the USB but the motors are what make th...

Scarlet•6/15/24, 9:36 AM

Oh cool XD

Thanks for helping cover my chronic lack of research

SScarlet Oh cool XD Thanks for helping cover my chronic lack of research 👍

Touch_Of_Legend•6/15/24, 9:38 AM

We’re all just students of the game.

Here there are no masters so we all just do the best we can and pass as much info around as possible.

It’s A LOT of stuff that goes into the Rhino so don’t feel bad.

I’m constantly learning about features (whole freaking features) I didn’t know existed lol

Scarlet•6/15/24, 9:38 AM

Touch_Of_Legend•6/15/24, 9:39 AM

Like… how did I not know that..

And it’s okay that’s what makes the hive mind so much stronger

Scarlet•6/15/24, 9:40 AM

I was a tiny bit worried how windows and DCS would handle the USB dropping out with the E stop. Glad to hear that doesn't happen

Flo-Soft•6/15/24, 1:30 PM

I don't own a Rhino (yet), but several other (FFB) devices. I am using a power strip with individual switches for each socket so I can activate the main power (220V) for each device as needed and can also switch of the whole thing with the main switch of the power strip. Additionally I am using an USB hub with individual on/off switches for each port (Sabrent works very well for me). So I can power on and off each USB device easily for the configuration I want to use. And at the end of a session all can be powered off, so no unnecessary waste of energy and increased lifetime of all electronic parts.

Fletch•6/15/24, 2:52 PM

Thanks @walmis for helping with fedex/customs clearance shenanigans! My Rhino has made it to it’s new home and getting installed today! Just in time to try it out on the new Kiowa in DCS. Very excited…

FarFutureFox•6/15/24, 7:56 PM

My stick’s C of G is rearwards due to the gooseneck shaft and heavy Warthog grip, meaning it naturally pulls back. I want to compensate for this so that for a loose helicopter cyclic I don’t have to counter the rearwards force with my hand, pushing forwards. I realise I can do this using the Spring setting, but this isn’t the loose feel I want. It also doesn’t centre it fully. What else can I do?

Scarlet•6/15/24, 8:10 PM

Lead and a hose clamp

(

(41F) RAFAIR Dave H•6/15/24, 8:18 PM

@FarFutureFox I had the Same issue and found a setting I think was called static rode or so thing similar that can adjust the center position for the weight and balance of your stick

FarFutureFox•6/15/24, 8:21 PM

“Static rode”?? No idea what rode is. I’ll have a look in the manual… thanks!

Scarlet•6/15/24, 9:03 PM

I assume they ment "mode". I too have heard about something like that: the software tries to compensate for the CoG without effecting the rest of the stick feel

FFarFutureFox My stick’s C of G is rearwards due to the gooseneck shaft and heavy Warthog grip...

corbu1•6/15/24, 9:04 PM

I use balance spring effect for this and adaptive centering on the spring effect

FFarFutureFox My stick’s C of G is rearwards due to the gooseneck shaft and heavy Warthog grip...

mechsicko•6/15/24, 9:10 PM

Mechanical counterbalance

TonyZ2525•6/15/24, 11:38 PM

@Thadiun Okona adds weight and therefore inertia to the stick which is bad for motors and all 3d printed parts

Mmechsicko Mechanical counterbalance

mechsicko•6/16/24, 12:26 AM

Nope. Adds mass yea but the motors work less hard when sticks are mass balanced because they’re no longer constantly working to hold it up. Ff sticks dont tend to be used hands off so a little increase in mass is inconsequential.. it’s already fighting your hands lol

mechsicko•6/16/24, 12:27 AM

If they freely swung around (hands free) by design then yes adding weights would increase wear as you state

smitty•6/16/24, 4:53 AM

Example- the steel slug on my collective. Without it, the tiny 57BLF01 set with balance spring would warm up pretty quickly

Agreed. If you don't have these already, MFG makes a great set of rudders. They are pretty customiza

Similar Threads