If you can afford $5 than you should upgrade. I work a lot of services and if you use it properly yo

If you can afford $5 than you should upgrade. I work a lot of services and if you use it properly you can very easily make your money's worth.

Ggrandell If you can afford $5 than you should upgrade. I work a lot of services and if yo...

quisi.do•6/25/24, 11:07 PM

I have no doubt that I will benefit from it after having services; but right now, it is impossible to build PoCs for services with queues. My goal is to build a service on free tier, establish market, then upgrade to increase my limits to account for the new traffic. But without queues in my free tier service, I am unable to launch a new service that harnesses queues.

Qquisi.do I have no doubt that I will benefit from it after having services; but right now...

caleb•6/25/24, 11:51 PM

Welcome to running a business. Sometimes you need to spend before you have revenue.

Paul•6/26/24, 12:46 AM

When writing multiple queue consumers, they always need to be defined in the root default export right? So if we have multiple queues in one worker, the only way to define multiple consumers is to have a switch statement or equivalent in the root queue-key export and route the message to the right consumer right? One would assume I would need to have a "name" or equivalent key in the message body as a result, in order to route the message to the correct consumer right?

dot.•6/26/24, 1:22 AM

how does queues compare to Amazon sqs?

PPranshu Maheshwari Hi @everyone! Pranshu here. I’m a product manager at Cloudflare and I’ve recentl...

LePichuDoesDev•6/26/24, 2:20 AM

LLog i dont use queues because my site is bad

Ducky•6/26/24, 4:18 AM

PPranshu Maheshwari Hi @everyone! Pranshu here. I’m a product manager at Cloudflare and I’ve recentl...

Ducky•6/26/24, 4:18 AM

thing is, i dont :dogekek:

PPranshu Maheshwari Hi @everyone! Pranshu here. I’m a product manager at Cloudflare and I’ve recentl...

Paul•6/26/24, 4:19 AM

I’m using queues to batch download media files for my saas. I just wonder the rationale for why there’s only one queue consumer function and it needs to be defined in the root.

It’s fine because we can still route the message to the correct queue consumers by some name or type key inside the message body to but I’m curious about the rationale for this architecture… unless this is just common and I’m just not familiar with it

PPranshu Maheshwari Hi @everyone! Pranshu here. I’m a product manager at Cloudflare and I’ve recentl...

SteffTek•6/26/24, 4:38 AM

We are building a fully digital, mobile point of sales system and are using queues for asynchronous jobs, like receipt creation, regulatory required backup jobs, syncing to other APIs and cash point closings.

Without queues we wouldn't be able to do this since some requests take longer than 30s.

Edit: we have a crazy technology stack. CF as backend, flutter for the mobile app (so far so good) and hecking Delphi for the windows env :pain: best startup ever

PPranshu Maheshwari Hi @everyone! Pranshu here. I’m a product manager at Cloudflare and I’ve recentl...

DeChill•6/26/24, 6:53 AM

I'm a big fan of CF Queues and especially the Consumer Worker model! The biggest thing I wish for is easier way to publish items to a Queue from external systems (like external Kafka Topics).

For example I'm using Debezium for change data capture on an external Database.
This then leads me to having to use Kafka -> HTTP -> Worker -> Queue to get these messages to a CF Queue which is a lot of overhead and you have to deal with all of the usual Webhook headaches

Original message was deleted

DaniFoldi•6/26/24, 7:19 AM

Thanks

Original message was deleted

Ɽ

ⱤØ₥₳₦•6/26/24, 7:33 AM

What is it and how we can use it? what's the real life usecase of this?

DDeChill I'm a big fan of CF Queues and especially the Consumer Worker model! The biggest...

oof2win2•6/26/24, 8:00 AM

i heavily agree with this. queues have a intended scenario of working on a per-customer basis, which i understand to be one queue per customer - each customer can then be a HTTP consumer and get+ack messages, but the issue is publishing messages to the queue. creating a queue is already possible with the CF api, the question only is if you can create enough access tokens for the queues

carlos-alberto•6/26/24, 9:49 AM

Since ~18:00 yesterday one of our queues has been erroring with

Queue send failed: Internal Server Error

Queue send failed: Internal Server Error

.

Trying to redeploy the worker gives

workers.api.error.unknown [code: 10013]

workers.api.error.unknown [code: 10013]

, as does trying to delete the queue. Anyone able to help figure out what is going on here?

Queue ID: 18dbd75d6a1946b48f614689ed23bec9

Ccarlos-alberto Since ~18:00 yesterday one of our queues has been erroring with `Queue send fail...

Matt Silverlock•6/26/24, 10:27 AM

Which timezone and what is your account ID? (safe to post here)

MMatt Silverlock Which timezone and what is your account ID? (safe to post here)

carlos-alberto•6/26/24, 11:02 AM

Timezone: BST
Account ID: ef98901aa25fef025cee6651b601b491

Ccarlos-alberto Timezone: BST Account ID: ef98901aa25fef025cee6651b601b491

Matt Silverlock•6/26/24, 12:27 PM

Are you still seeing issues? (either sending messages or creating a Queue)

Was this sporadic?

MMatt Silverlock Are you still seeing issues? (either sending messages or creating a Queue) Was...

carlos-alberto•6/26/24, 12:43 PM

This is ongoing, we are unable to interact with that queue in any way. Even trying to update the "Delivery delay" gives the same error

Ccarlos-alberto This is ongoing, we are unable to interact with that queue in any way. Even tryi...

Matt Silverlock•6/26/24, 12:44 PM

@Pranshu Maheshwari ^

carlos-alberto•6/26/24, 12:44 PM

We've deployed a new version of our worker under a new name, and a new queue so we can work around this, but it's ongoing for this queue

Pranshu Maheshwari•6/26/24, 1:27 PM

Thanks for highlighting this, we're looking into it

Original message was deleted

santosh•6/26/24, 4:58 PM

@FraznoFire ?

PPranshu Maheshwari Hi @everyone! Pranshu here. I’m a product manager at Cloudflare and I’ve recentl...

Fabian•6/26/24, 5:25 PM

We use queues to aggregate calls to an external API, only thing that would make queues for that use-case better is that batches currently cannot be grouped by a (custom) identifier - say we scope all the data to a single customer and group it under a 30s queue timeframe, we could have more efficient calls to the external API (since they also operate under a per-customer/ID resource scope).
This is relevant because the external API has relatively strict account rate-limits (not scoped to the ID).
Right now it's hit or miss since possibly 100 different customers could join the same batch effectively resulting in groups of 1 and thus 100 API calls.
In this case we would prefer grouped batching over quick execution of a random batch if you understand what I mean

andyy•6/26/24, 5:49 PM

is there any kind of queue bindings-per-worker limit? (sorry if I missed it anywhere in the docs). curious whether it's possible/sensible to have a queue-per-customer architecture all written to by the same producer worker. thanks!

Ttizmagik Hey folks. On latest wrangler (`3.62.0`) and it looks like trying to do `wrangle...

Pranshu Maheshwari•6/26/24, 8:32 PM

Hmm I haven't been able to replicate this on my side. CLI arguments should override what you've specified in

wrangler.toml

wrangler.toml

Thisjrodriguez•6/27/24, 6:28 AM

Hello,

I intend to use queues to save the data of each visit and then import them to have an analytic.

Is this the use of queues? I understand that yes, but if someone confirms me I would appreciate it.

TThisjrodriguez Hello, I intend to use queues to save the data of each visit and then import th...

Matt Silverlock•6/27/24, 11:19 AM

What kind of analytics? Writing directly to WAE may be more effective: https://developers.cloudflare.com/analytics/analytics-engine/

Cloudflare Docs

Workers Analytics Engine · Cloudflare Analytics docs

Workers Analytics Engine provides unlimited-cardinality analytics at scale, via a built-in API to write data points from Workers, and a SQL API to …

MMatt Silverlock What kind of analytics? Writing directly to WAE may be more effective: https://d...

Thisjrodriguez•6/27/24, 11:47 AM

a personalized one, I just wanted to know if it is useful for what I proposed.

TThisjrodriguez a personalized one, I just wanted to know if it is useful for what I proposed.

Matt Silverlock•6/27/24, 11:50 AM

It’s hard to say: you haven’t provided enough detail.

A Queue simply puts messages onto a queue for you to consume later.

That can be useful for deferring work or batching tasks together for efficiency, and/or getting “slow” API calls off the hot path so they don’t slow down user-facing responses.

andyy•6/27/24, 1:39 PM

Hi again! Is it possible to test pull consumers locally? I.e. fetch() from some wrangler local dev host rather than api.cloudflare.com/.../queues/../messages/pull. Big thanks!

Michael Wittig•6/27/24, 6:01 PM

Hi! Can someone from Cloudflare help to raise my API limits? I constantly run into 429 when polling queues with a larger fleet of EC2 instances.

FFabian We use queues to aggregate calls to an external API, only thing that would make ...

telliks•6/27/24, 6:37 PM

I second this. GCP PubSub has this concept to provide an “ordering key”. Messages of the same ordering key needs to be processed in a specific order without delaying others.

MMichael Wittig Hi! Can someone from Cloudflare help to raise my API limits? I constantly run in...

Pranshu Maheshwari•6/27/24, 9:23 PM

Could you fill out this form?https://docs.google.com/forms/d/e/1FAIpQLSd_fwAVOboH9SlutMonzbhCxuuuOmiU1L_I5O2CFbXf_XXMRg/viewform

Google Docs

Cloudflare Developer Platform: Limit Increase Request Form

Want to increase the limits of your current plan? Let us know what your requirements are here.

PPranshu Maheshwari Could you fill out this form?https://docs.google.com/forms/d/e/1FAIpQLSd_fwAVObo...

Michael Wittig•6/28/24, 7:23 AM

Thanks @Pranshu Maheshwari I tried that 1 month ago with no response. I just submitted the form again, let's see what happens

johtso•6/28/24, 6:39 PM

How do I reject a message?

Jjohtso How do I reject a message?

Hard@Work•6/28/24, 6:41 PM

Like, so that it doesn't get processed again?

johtso•6/28/24, 6:41 PM

if I

message.ack()

message.ack()

and then

await env.<MY_DEAD_LETTER_QUEUE>.send(foo)

await env.<MY_DEAD_LETTER_QUEUE>.send(foo)

is it guaranteed that either both will succeed or neither will?

johtso•6/28/24, 6:42 PM

basically if I process a message and know it can't succeed to I want to send it straight to my naughty bin

Jjohtso if I `message.ack()` and then `await env.<MY_DEAD_LETTER_QUEUE>.send(foo)` is it...

Hard@Work•6/28/24, 6:42 PM

Maybe the other way around?

If you can afford $5 than you should upgrade. I work a lot of services and if you use it properly yo

Similar Threads

Similar Threads

Similar Threads