Universal Blue•2y ago

Yeah I can't go back to traditional after this

aj53108•6/27/24, 8:11 PM

rebased to testing. played around for a bit. typed in the rollback command and booted right back to stable.

aj53108•6/27/24, 8:11 PM

so easy even a noob like me can do it.

aj53108•6/27/24, 8:13 PM

oh and i pinned my stable deployment too just to be safe.

KKyle Gospo auto-dGPU is a bazzite feature

tducasse•6/27/24, 8:13 PM

okay so it doesn't flicker anymore, but I still have the intel card in steam

Onihikage•6/27/24, 8:15 PM

>notice memory is at 92%
>close everything except steam
>still at 80%
>close Steam
>mfw

Janier•6/27/24, 8:15 PM

If you rollback you overwriting the same image? If you 0 is testing and 1 is stable 2.9 you will keep the 2.9? (No pinned)

aj53108•6/27/24, 8:16 PM

i believe if i understand it correctly, rollback just switches them. so testing would move to 1 and stable would be 0. so that way it default boots to stable again.

aj53108•6/27/24, 8:17 PM

and then the next time you update stable, your current stable build goes to 1 and the new update would be at 0. and testing would be gone unless you pin it.

Janier•6/27/24, 8:17 PM

I see,ty for the explanation

aj53108•6/27/24, 8:17 PM

you bet. hopefully i'm right but thats how it seemed to me when i read through the documentation.

Ttducasse okay so it doesn't flicker anymore, but I still have the intel card in steam

Kyle Gospo•6/27/24, 8:21 PM

can you give me the output of

switcherooctl

switcherooctl

KKyle Gospo can you give me the output of `switcherooctl`?

tducasse•6/27/24, 8:22 PM

$ switcherooctl
Device: 0
  Name:        Intel® UHD Graphics 630
  Default:     yes
  Discrete:    no
  Environment: DRI_PRIME=pci-0000_00_02_0

Device: 1
  Name:        NVIDIA Corporation TU104M [GeForce RTX 2070 SUPER Mobile / Max-Q]
  Default:     no
  Discrete:    yes
  Environment: __GLX_VENDOR_LIBRARY_NAME=nvidia __NV_PRIME_RENDER_OFFLOAD=1 __VK_LAYER_NV_optimus=NVIDIA_only

$ switcherooctl
Device: 0
  Name:        Intel® UHD Graphics 630
  Default:     yes
  Discrete:    no
  Environment: DRI_PRIME=pci-0000_00_02_0

Device: 1
  Name:        NVIDIA Corporation TU104M [GeForce RTX 2070 SUPER Mobile / Max-Q]
  Default:     no
  Discrete:    yes
  Environment: __GLX_VENDOR_LIBRARY_NAME=nvidia __NV_PRIME_RENDER_OFFLOAD=1 __VK_LAYER_NV_optimus=NVIDIA_only

Kyle Gospo•6/27/24, 8:22 PM

that looks good, you nvidia gpu is marked as discrete as it should be

Kyle Gospo•6/27/24, 8:22 PM

what makes you think it's not being used?

tducasse•6/27/24, 8:23 PM

wouldn't this say nvidia?

tducasse•6/27/24, 8:23 PM

(that's the steam window)

Ttducasse wouldn't this say nvidia?

Kyle Gospo•6/27/24, 8:23 PM

not necessarily

Kyle Gospo•6/27/24, 8:23 PM

try launching a game

tducasse•6/27/24, 8:23 PM

alright, I'll try

tryhardsoccermomswag•6/27/24, 8:23 PM

run a demanding game

tryhardsoccermomswag•6/27/24, 8:23 PM

pretty obvious which gpu would be used

Ttryhardsoccermomswag pretty obvious which gpu would be used

tducasse•6/27/24, 8:25 PM

ugh even balatro runs at 20 fps when it's not the proper GPU, let me see

RRobotta Yeah I can't go back to traditional after this

LJMPRO•6/27/24, 8:25 PM

Yeah, agreed. I love the vision of Cloud Native Linux. It's a future of stability and ease-of-use which is something I think Linux as a whole for the desktop experience needs to be successful.

Janier•6/27/24, 8:27 PM

I love that bazzite have a list of useful commands on the console,so useful for a noob like me

kou•6/27/24, 8:30 PM

is there any hotkey equal to steam key + x on the steam deck to bring up the virtual keyboard? im trying to figure it out on my ally

Kkou is there any hotkey equal to steam key + x on the steam deck to bring up the vir...

LJMPRO•6/27/24, 8:31 PM

Try clicking in the left stick, also it can be remapped in the steam UI

LLJMPRO Try clicking in the left stick, also it can be remapped in the steam UI

kou•6/27/24, 8:31 PM

alright,, do you know where to remap it?

antheas•6/27/24, 8:32 PM

next update left paddle will do that too

Kkou alright,, do you know where to remap it?

LJMPRO•6/27/24, 8:32 PM

kou•6/27/24, 8:33 PM

:thanks:

LJMPRO•6/27/24, 8:33 PM

@march https://universal-blue.discourse.group/t/asus-rog-ally-handheld-compatibility/2414

Take advantage of the awesome docs they have on their discourse group. I've grown accustomed to going there for all my needs.

Universal Blue

ASUS ROG Ally Handheld Compatibility

ASUS ROG Ally Status: Gold Post-Installation Setup Open a host terminal and enter the following commands: ujust setup-decky for Decky Loader (This can also be installed in the Bazzite Portal) ujust setup-decky simpledeckytdp for SimpleDeckyTDP. Install the Handheld Controller Glyphs theme for hhd & CSS Loader. Install the CSS Loader De...

kou•6/27/24, 8:34 PM

ill give it a read over, thanks

antheas•6/27/24, 8:34 PM

also combos with the top buttons dont work on the ally

antheas•6/27/24, 8:35 PM

you need to swap them if you want that

kou•6/27/24, 8:35 PM

the triggers?

KKyle Gospo try launching a game

tducasse•6/27/24, 8:39 PM

looks like it's slow, I get 30fps on balatro
also:

$ glxinfo | grep -E "OpenGL vendor|OpenGL renderer"
OpenGL vendor string: Intel
OpenGL renderer string: Mesa Intel(R) UHD Graphics 630 (CFL GT2)

$ glxinfo | grep -E "OpenGL vendor|OpenGL renderer"
OpenGL vendor string: Intel
OpenGL renderer string: Mesa Intel(R) UHD Graphics 630 (CFL GT2)

kou•6/27/24, 8:40 PM

i got the hotkey to work, tysm! its horrendously laggy/stuttery to load up though

kou•6/27/24, 8:40 PM

as in the animation lags, lol

antheas•6/27/24, 8:41 PM

keyboard?

antheas•6/27/24, 8:41 PM

bump tdp

kou•6/27/24, 8:42 PM

i think im at 20w, but hdd might be weird

Ttducasse looks like it's slow, I get 30fps on balatro also: ``` $ glxinfo | grep -E "Open...

Dobsgw•6/27/24, 9:02 PM

launch a game, alt tab into terminal, check if it's running on nvidia gpu with "nvidia-smi"

Dobsgw•6/27/24, 9:02 PM

make sure power profile is set to balanced / performance

DDobsgw make sure power profile is set to balanced / performance

tducasse•6/27/24, 9:04 PM

and yeah, balanced power profile

Valerie•6/27/24, 9:07 PM

my eyes

RobottaOP•6/27/24, 9:16 PM

error: Updating rpm-md repo 'fedora-nvidia': repodata fedora-nvidia was not complete: Incomplete repository - /var/cache/rpm-ostree/repomd/fedora-nvidia-40-x86_64/repodata/eb8c5b41d45a6311d8eda873328dcb6df78064d154773c209d9ab673f0ab7cca-appstream.xml.gz is missing

got this when doing ujust update

RobottaOP•6/27/24, 9:17 PM

it never failed before until now

RobottaOP•6/27/24, 9:17 PM

i guess its safe to disable it?

RobottaOP•6/27/24, 9:18 PM

hmm i should probably wait a litle before updating

Ttducasse and yeah, balanced power profile

Dobsgw•6/27/24, 9:25 PM

Doesn't look like it - just xorg running on gpu

$ switcherooctl Device: 0 Name: Intel® UHD Graphics 630 Default: yes Discrete: no Environment: DRI_PRIME=pci-0000_00_02_0 Device: 1 Name: NVIDIA Corporation TU104M [GeForce RTX 2070 SUPER Mobile / Max-Q] Default: no Discrete: yes Environment: __GLX_VENDOR_LIBRARY_NAME=nvidia __NV_PRIME_RENDER_OFFLOAD=1 __VK_LAYER_NV_optimus=NVIDIA_only

Yeah I can't go back to traditional after this

Similar Threads

Similar Threads

Similar Threads