VPforce Controls•2y ago

hey guys, just trying to understand something

ddrake1984OP•7/11/24, 10:40 PM

ddrake1984OP•7/11/24, 10:42 PM

the article has the 86BLF04 @ 4.2nm. but on the website this says it's 1.05nm peak

Old Prospector•7/11/24, 10:44 PM

List should be 01 yes?

ddrake1984OP•7/11/24, 10:45 PM

and in the post in FAQ it says 57BLF03 which is 1.6nm is in the Rhino? but says the Rhino produces up to 9nm

ddrake1984OP•7/11/24, 10:47 PM

hmm.. I am just not understanding, and I read this 📃general

ddrake1984OP•7/11/24, 10:47 PM

20+nm can be achieved

B3lr1an•7/11/24, 10:49 PM

Proper reduction means what gearing?

AndyHill•7/11/24, 10:49 PM

9Nm is the entire system's performance

smitty•7/12/24, 12:14 AM

on those charts the 01 and 04 are switched. same with the 57 size

amadeus•7/12/24, 12:16 AM

every chart i google has the same organization that drake linked above? :thonk:

amadeus•7/12/24, 12:17 AM

here's another that i found

amadeus•7/12/24, 12:19 AM

but yeah, weird :thonk:

smitty•7/12/24, 12:20 AM

4,3,2,1,6,7

smitty•7/12/24, 12:20 AM

its like the worst order to watch star wars or something

amadeus•7/12/24, 12:20 AM

haha

walmis•7/12/24, 5:31 AM

There are many different manufacturers, some spec the motor models with inverted numbering ¯\_(ツ)_/¯

walmis•7/12/24, 5:36 AM

The torque in manufacturer spec is for spinning applications. For holding torque it's best calculated TqConst[Nm/A] * max_driver_current[A] = Tq[Nm]TqConst[Nm/A] * max_driver_current[A] = Tq[Nm], so on paper 57BLF03 achieves 1.98Nm @ 30A, it's a bit lower in reality

VPforceBot•7/12/24, 11:34 AM

:package:

RHINO #0624 Has Shipped!

VPforceBot•7/12/24, 11:34 AM

:package: RHINO #0627 Has Shipped!

VPforceBot•7/12/24, 11:34 AM

:package:

RHINO #0625 Has Shipped!

AndyHill•7/12/24, 11:38 AM

is that one rhino going to the ISS or something

AAndyHill is that one rhino going to the ISS or something

walmis•7/12/24, 11:43 AM

"United States of Freedom"

Lt_Dan•7/12/24, 2:06 PM

Can’t believe the amount of drop outs not complaining though as mines coming soon

RoboGeoff•7/12/24, 2:55 PM

I'm waiting eagerly for the delivery of my Rhino

Spitfire ZX•7/12/24, 3:35 PM

I'm rapidly approaching the "less Rhinos before me than have been built ever" landmark with 675 left, so that's fun

PokePoke•7/12/24, 4:26 PM

Software is amazing, but UI font scale not syncronize to windows font size

PokePoke•7/12/24, 4:28 PM

current torque is enough for 3d printed housing, for higher torque need metal housing.

PokePoke•7/12/24, 4:29 PM

really higher torque is not needed for me.

LLt_Dan Can’t believe the amount of drop outs not complaining though as mines coming soo...

Varibraun•7/12/24, 4:29 PM

Completely concur with your happiness moving up rapidly on the list - I just paid for mine! I would much rather invest in a proven product/software knowing I have Walmis's experience behind it vs. guessing about what is really coming from others and how it will meet the rigors of dogfighting. Looking very forward to getting in my hands a few months early.

Dddrake1984 hey guys, just trying to understand something

PokePoke•7/12/24, 4:33 PM

Hentai motor good name. well branded

PokePoke•7/12/24, 4:36 PM

I cannot say power of rhino is MORE THAN enough, but it is really enough.

PokePoke•7/12/24, 4:37 PM

with more than 15~ 20nm~ of torque,

PokePoke•7/12/24, 4:38 PM

okay have more dynamic range but really there is risk of injury

PokePoke•7/12/24, 4:39 PM

once the grip slips out from hand, it will be swinging like mini metal bat.

PokePoke•7/12/24, 4:40 PM

and it will crack step by step some 3d printed material and wood which is not strong enough for the torque

PokePoke•7/12/24, 4:41 PM

for somebody who need higher torque for special purpose, it can be needed but not me at least.

PokePoke•7/12/24, 4:42 PM

I really don’t want to simulate risk

PokePoke•7/12/24, 4:42 PM

and I really hate Chinese style torque marketing,

PokePoke•7/12/24, 4:43 PM

I move from 8.5nm to 21nm on my Sim racing wheel base, (it is bit different story but anyway)

VVaribraun Completely concur with your happiness moving up rapidly on the list - I just pai...

Lt_Dan•7/12/24, 4:43 PM

I paid today aswell

PokePoke•7/12/24, 4:44 PM

I use it with 10nm which is enough.

PokePoke•7/12/24, 4:46 PM

what really important is software that controll motors, and simulate effects through telemetry data. not a torque itself.

PokePoke•7/12/24, 4:48 PM

Many Chinese late comers in sim racing market, they advertise there torque (peak torque) but there sense of driving, feeling is not that good for the torque, Feeling is not proportional to torque

PokePoke•7/12/24, 4:49 PM

it much more matter how software works.

PokePoke•7/12/24, 4:52 PM

even you prefer higher dynamic range, you cannot not use it without power filtering, because. torque power spike can be really dangerous especially it is more than 15nm~

PokePoke•7/12/24, 4:52 PM

don’t forget that metal grip is much more stronger than your finger bone.

PPokePoke current torque is enough for 3d printed housing, for higher torque need metal ho...

Hiob•7/12/24, 4:54 PM

I would disagree. The housing isn’t the week point, the gimbal (and stick connector) is….

PokePoke•7/12/24, 4:54 PM

I am sure that even though you play with higher torque you will need torque power limit or filter for safety

HHiob I would disagree. The housing isn’t the week point, the gimbal (and stick connec...

PokePoke•7/12/24, 4:56 PM

ah if you say so, but when I tightening bolt to mount, i couldn’t use my full power because there was cracking sound haha

PokePoke•7/12/24, 4:56 PM

yeah need to beware of overtightening

hey guys, just trying to understand something

Similar Threads