current torque is enough for 3d printed housing, for higher torque need metal housing.
current torque is enough for 3d printed housing, for higher torque need metal housing.
Preally higher torque is not needed for me.
VCompletely concur with your happiness moving up rapidly on the list - I just paid for mine! I would much rather invest in a proven product/software knowing I have Walmis's experience behind it vs. guessing about what is really coming from others and how it will meet the rigors of dogfighting. Looking very forward to getting in my hands a few months early.
PHentai motor good name. well branded
PI cannot say power of rhino is MORE THAN enough, but it is really enough.
Pwith more than 15~ 20nm~ of torque,
Pokay have more dynamic range but really there is risk of injury
Ponce the grip slips out from hand, it will be swinging like mini metal bat.
Pand it will crack step by step some 3d printed material and wood which is not strong enough for the torque
Pfor somebody who need higher torque for special purpose, it can be needed but not me at least.
PI really don’t want to simulate risk
Pand I really hate Chinese style torque marketing,
PI move from 8.5nm to 21nm on my Sim racing wheel base, (it is bit different story but anyway)
LI paid today aswell 
PI use it with 10nm which is enough.
Pwhat really important is software that controll motors, and simulate effects through telemetry data. not a torque itself.
PMany Chinese late comers in sim racing market, they advertise there torque (peak torque) but there sense of driving, feeling is not that good for the torque, Feeling is not proportional to torque
Pit much more matter how software works.
Peven you prefer higher dynamic range, you cannot not use it without power filtering, because. torque power spike can be really dangerous especially it is more than 15nm~
Pdon’t forget that metal grip is much more stronger than your finger bone.
HI would disagree. The housing isn’t the week point, the gimbal (and stick connector) is….
PI am sure that even though you play with higher torque you will need torque power limit or filter for safety
Pah if you say so, but when I tightening bolt to mount, i couldn’t use my full power because there was cracking sound haha
Pyeah need to beware of overtightening
Panyways, current torque is very good for playing with safety and housing, (or gimbal)
P
PI am considering cancellation of moza ab9, because I have zwei rhinos haha. but I am curious about it on the other side.
HOf course you need to be careful when screwing into plastic. That’s without question. But the screws don’t need to be super tight to give the housing strength.
PYes, You are right. actually it is super strong. satisfying quality.
![SR-F_Winger_[73]_David](https://cdn.discordapp.com/avatars/98037306870472704/f924b51d2e4486c1eb873c2f4fb7f6a3.webp?size=40)
S2 more kits available popepoke.
So if you want another two;)...
So if you want another two;)...
Cmoza side stick and ur rhino for center stick
BSounds like you just need to build three pits.
CCan anyone point me in the direction of the message for the quick release clamp for VKB gunfighter. Was wanting to order the right clamp but can't seem to find the message.
Ncredit goes to @KirillBubel for the original idea like 2 years ago https://discord.com/channels/965234441511383080/1145651561578647582/1252738742167404655
N15mm is a bit short, you have room to go longer if you want for more thread engagement
CThank you!
Nwhat's your grip? Clamp only works for non twist MCGs and extensions, no clearance otherwise
LI guess simautica actually developed a webstore
@=RS= ddrake1984 willing to bite the bullet, I don't think any one has even evaluated these yet
https://www.simnautica.com/product-page/ga-forcefeedback-rudder-pedals
@=RS= ddrake1984 willing to bite the bullet, I don't think any one has even evaluated these yet
https://www.simnautica.com/product-page/ga-forcefeedback-rudder-pedals
Simnautica
Elevate your flight simulation with our high-performance GA Rudder Pedals. Key features include: Realistic Force Feedback: Powerful BLDC motor delivers up to 20KG of force for unparalleled immersion. All-Metal Construction: Built for durability and precision. Adjustable Pedal Distance: Customize for the perfect fit. Load Cell Toe Brakes: Sensiti...
L99% sure it’s based off FFBeast
Dlooks really nice, not sure how your feet are gonna slide tho
LYeah someone will have to be the guinea pig to figure out how it actually works. Would be good if they had a demo video somewhere of it being used
HLooks a bit narrow to me. Quite the opposite of the MFGs which are on the wide side.
SCheck the page, they adjust WIDE
SIt looks like they're based on the Cessna 150 style pedals, where most of the input comes from flexing at the ankle and pivoting on your heel. For full travel you'd pick up the heel and push with your whole leg
TSame as most of the trainers and small (single) engine.
The Piper Cherokee I got my license on (1994) is the same way with different pedals and a wider stance (closer to MFG stance which is honestly closer to the fighters with a tunnel as well)
Close together pedals are mostly on helicopters honestly
The Piper Cherokee I got my license on (1994) is the same way with different pedals and a wider stance (closer to MFG stance which is honestly closer to the fighters with a tunnel as well)
Close together pedals are mostly on helicopters honestly
PCan Hippo implement Gear Lock for H shifter?
Pif it does I will sell my 900euro H shifter
Pand I can side mount it
SYeah exactly. C150 is tiny. I was the smallest person at my school and even I had trouble getting full control throw.
MHey guys 
Does the Rhino work with Warthunder? It should work as a standard joystick but I want to know if warthunder has FFB that the rhino can use
Does the Rhino work with Warthunder? It should work as a standard joystick but I want to know if warthunder has FFB that the rhino can use
FNope