are you using vjoy? At least one person had issues exactly like you describe caused by VJoy. https
are you using vjoy? At least one person had issues exactly like you describe caused by VJoy. 🧰support
![[OR] SerGeant](https://cdn.discordapp.com/avatars/290181622832168961/338cff3e564800fa5a1068e9c25e28f5.webp?size=40)
[I did not install it manually. Maybe an application did it automatically. I think winwing is doing so. Will have a look tomorrow.
TI have spring and damper setup but the damping of the spring "bounce" at the center in the X axis is more pronounced than the Y. In other words, when you deflect and release in the Y, it's perfectly damped to spring back to center and stop. When released in X, it bounces in the center 5-6 times before coming to full rest. Any suggestions?
[Hey there! I know this behavior. Have I the same way. It’s more present on higher gains.
Mine does not bounce so often but you see a difference to the x-axis.
Mine does not bounce so often but you see a difference to the x-axis.
HNo, unless you have a switched power supply or outlet, you should turn off the Rhino with the e-stop.
[so deinstalling vjoy did make no difference.
DCS is only giving out data to the pedals.
DCS is only giving out data to the pedals.
![[OR] SerGeant](https://cdn.discordapp.com/avatars/290181622832168961/338cff3e564800fa5a1068e9c25e28f5.webp?size=16)
HHave you checked the IDs you gave to the devices? Are they different?
[Stick 2055, Pedals 2054
[Ok, I got it working. Export script in DCS is causing the issue.
With only TelemFFB an SimShaker it works.
Seems like SimHaptic is causing a conflict.
With only TelemFFB an SimShaker it works.
Seems like SimHaptic is causing a conflict.
WJust received my Rhino this week and love it so far. I am having an issue with getting the F-18 autopilot and the Rhino to play nice with each other. Any solutions? I've searched here but didn't find anything addressing it. Thanks.
WSorry, forgot to mention it's for DCS
Update: Figured out the problem. Deselected spring force.
Update: Figured out the problem. Deselected spring force.
EHi guys. I am experiencing some issues with the estop switch. It seems to be loose and causes ffb disconnection now and then. Any suggestions to fix it? Are there any instructions to dismantle the Rhino to fix the e stop switch correctly?
FThe TelemFFB app is now always opening off right side of the screen (I can see a fast animation of the window zooming to the right). I’ve reinstalled it, but it doesn’t help. I’ve tried changing resolution but it doesn’t help. I can’t access its window for obvious reasons. Any ideas?
NFor now, you can delete the saved window location key from the registry. Next version will prevent the window placing itself on a 2nd screen x,y if that screen is no longer connected. https://discord.com/channels/965234441511383080/1230919462144835674/1269309404474249366
NCan someone explain to me the button mapping in the FFB Configurator? When I go to set keybinds in the simulator, some buttons aren't registering and some are registering the same button for different buttons (a 5 way hat will register the same button for two different directions)
BI’m having issues getting DCS to recognize the vkb gunfighter mcg ultimate and the rhino. Any help would be greatly appreciated
LHi! What seems to be the problem? Does MCGU show up in Windows game controllers? Do you use Loopback grip type in VPforce configurator? Is your blackbox blinking?
LWhat about Windows?
LOk the grip should been seen in DCS too. What do you get in DCS? Rhino and MCGU or just one of them - or neither?
LI forgot to ask : does your Rhino+MCGU work in any other sim?
LSo you get both Rhino and your grip in DCS now that you removed the file?
LOk your VPforce configurator settings, please?
LCan you just Shift-Win-S the Settings and Effects pages please
L(Looks like F-14 rather than 18 config, but you should still feel a lot)
LI think you pasted Effects twice
LF/A-18 has trim implemented by ED you can uncheck that Harware trim
LI'm not seeing any obvious problem here...
You X-axis is inbverted (but Y is not which is unusual if you have a stock Rhino)
You X-axis is inbverted (but Y is not which is unusual if you have a stock Rhino)Lnot at this point, it's extra. Make sure everything works first, then install TelemFFB
Land you have not inverted X-axis in DCS?
Lif you have a F/A-18 button assigned to Rhino, ignore it. Your Rhino doesn't have ANY buttons. It only has pitch and roll.
Lso it doesn't do anything. You can clear all Rhino's buttons if you ONLY use VKB grips.
LI use grips from 3 manufacturers so I do need double bindings.
LIf your problem at this point is that TelemFFB installation breaks all effects you probably should continue here 📟telemffb-user and ask Number481 what you should do
LYou don't get any spring force?
LThen it's not time to install TelemFFB yet
LTry changing your Spring gain map to 100% you have it at only 50%
L(though you should still feel 50% x 69% which you have set your pot)
Lactually it's not gain map
LIf you look at roll in VPforce configurator, is the movement normal there?
L
LCheck your DCS axis tuning
LDoes it move normally there?
LThey are not in VKB they are in Rhino
Awhy would you map pitch and roll on vkb
LVKB is just the grip, so no axes there. Check it in Rhino which has X and Y (and nothing else)
LNo worries
LSo check axis tuning on Rhino X & Y next
LIt moves the same way it does in VPF config?
Lin axis tuning?
LWhat does this look like on yours?
Lthis is from my 18