Zestimated time remaining at the current iteration rate... 1245 hours, 53 min, and 37s
VIs that a typical time for the 48gb Dreambooth config at 100 images?
Fit is gonna take 1245 hours
Fplease read this article top to bottom
FPatreon
Get more from SECourses: FLUX, Tutorials, Guides, Resources, Training, Scripts on Patreon
V@Furkan Gözükara SECourses I'm on that page atm. I ask because the hours are much longer then expected. To confirm the 48gb config should be 40 repeats and 200 epochs? (48GB_GPU_28200MB_6.4_second_it_Tier_1)
Fyou can see my timings
V@Furkan Gözükara SECourses I'm looking at the 48gb one. It says the repeat is set at 1 but the config is at 40. Should it be instead set at 1?
Frename your folder to 1
V@Furkan Gözükara SECourses I appreciate the confirmation. I would recommend double checking the epoch and repeat for your config, it might have mistakes in this area.
F
Fhow many images you have to train?
V89
Fok train up to 100 epoch at least
Fpreferably 150
Fand compare
VSo 150 epoch at 1 repeat or is higher recommended?
Falways 1 repeat with flux
V@Furkan Gözükara SECourses I see. That makes the results even more impressive! But the images are all of your face. Do you know if its recommended for styles like oil paintings?
Fit is totally same
Fi have style training
VThat's actually impressive. I always see in your videos pictures of yourself. 
Have you tried mixing it up with styles to see if you get more views/subscriptions?
Have you tried mixing it up with styles to see if you get more views/subscriptions?VI would recommend it. Training the images of the face is good for people who make celebrity loras etc, but most of us want to train on styles, concepts etc.
VYou can even do some on characters etc.
V@Furkan Gözükara SECourses Have you looked into flux rapid lora training? Both fal and civit.ai offer it.
https://education.civitai.com/quickstart-guide-to-flux-1/#rapid-flux-training
https://education.civitai.com/quickstart-guide-to-flux-1/#rapid-flux-training
Fi checked civitiai
Fas expected it was inferior
Fi didnt pay for fal
Fi know it will be too
VI think if you make your own version you would get lots of begginers to payfor the config. I know I would have signed up for it back then.
WHi @Furkan Gözükara SECourses I use your Batch_Size_7_48GB_GPU_46250MB_28.9_second_it_Tier_1. In the config I only see 1 GPU not multi GPU, so you only increase the batch file to 7 right. What about the time and quality if I use your batch 7, does it save me 7 times less than your batch 1 config and the quality is the same ?
C@Furkan Gözükara SECourses saw your Flux 15 images vs 256 analysis and it was very insightful. Obviously 256 images may not be practical in many cases and would take a long time on Batch 1. Let's say I have the more realistic option of using 30 or 40 images. Do you think that is better than 15?
CAssuming all are high quality images
Fif you get 7 GPU SXM machine with A100
Fit will be like 7 times faster
F
Fand you can use same learning rate
Fdefinitely better
F15 images underperform
WSo I can't use A6000 right ? because based your named 48gb I though 7xA6000 are enough
CIs Torch 2.5 OK now or not? I can't figure it out from the Video Tutorial, this is for Dreambooth Flux
Fyou can use
Fbut not for fine tuning
Fbut for lora multi gpu
Fit is ok to use for windows
Whttps://1drv.ms/u/s!AoU1QUjSr6pJrbdRgnQNUMMyMe2qTg?e=xCOQuv
Hi, could you guide me through what's wrong with this training. My latest samples at 4400 steps are still far from imitating Justin Sweet's style. Thanks
Hi, could you guide me through what's wrong with this training. My latest samples at 4400 steps are still far from imitating Justin Sweet's style. Thanks
