Cloudflare Developers•15mo ago

I liked the two 6 min videos -> https://discord.com/channels/595317990191398933/1296923707792560189/

I liked the two 6 min videos -> workflows

Ffry69 I liked the two 6 min videos -> https://discord.com/channels/595317990191398933/...

Avi•10/26/24, 7:27 PM

i hadn't seen this! looking into it now

AAvi i hadn't seen this! looking into it now

fry69OP•10/26/24, 7:29 PM

Also the guide is pretty straight forward IMHO -> https://developers.cloudflare.com/workflows/get-started/guide/

Cloudflare Docs

Guide | Cloudflare Workflows docs

Workflows allow you to build durable, multi-step applications using the Workers platform. A Workflow can automatically retry, persist state, run for hours or days, and coordinate between third-party APIs.

Avi•10/26/24, 7:30 PM

got it!

Avi•10/26/24, 7:45 PM

ok, from looking into it a bit more - it does seem like workflows would be a great tool here. but it's just a bit too unstable/immatre to trust at this point. it seems it only just barely works in

wrangler dev

wrangler dev

, there's no way to delete workflows, etc

DoggeSlapper•10/27/24, 4:26 PM

If I got folowing scheduled on wrangler what I should do set to 5min? Or that will always catch into the 5min case?

  scheduled(event: ScheduledEvent, env: Bindings, ctx: ExecutionContext) {
    switch (event.cron) {
      case "*/5 * * * *":
        break;
      case "*/10 * * * *":
        // Every ten minutes
        break;
      case "0 * * * *":
        // Every hour
        break;
      case "0 0 * * *":
        // Every day
        break;
    }
  },

  scheduled(event: ScheduledEvent, env: Bindings, ctx: ExecutionContext) {
    switch (event.cron) {
      case "*/5 * * * *":
        break;
      case "*/10 * * * *":
        // Every ten minutes
        break;
      case "0 * * * *":
        // Every hour
        break;
      case "0 0 * * *":
        // Every day
        break;
    }
  },

Original message was deleted

Kevin•10/27/24, 4:39 PM

Unless you are fine with loads of boilerplate, I'd recommend using a lightweight router of some sort (e.g Hono or itty). They just streamline the routing/matching logic so you can focus on your handlers instead of how to register/match them.

DDoggeSlapper If I got folowing scheduled on wrangler what I should do set to 5min? Or that wi...

DoggeSlapper•10/27/24, 4:42 PM

Answering my self should be an array as in https://developers.cloudflare.com/workers/configuration/cron-triggers/

Cloudflare Docs

Cron Triggers | Cloudflare Workers docs

Enable your Worker to be executed on a schedule.

kaelys.js•10/27/24, 7:55 PM

Is there a proper channel to ask questions about snippets?

Kkaelys.js Is there a proper channel to ask questions about snippets?

DaniFoldi•10/27/24, 10:53 PM

There's no dedicated channel, so if it's a code-related question, I think here or #workers-help is fine. If it's more of a ruleset engine question, maybe #general-help / #general-discussions is more suitable

gh0st.•10/27/24, 11:09 PM

Hey if I had a domain registered on another domain registrar and I wanted to switch to CloudFlare what would I have to do?

gh0st.•10/27/24, 11:11 PM

Also how do I check the plan I have on CloudFlare or change it and what it has?

Ggh0st.Hey if I had a domain registered on another domain registrar and I wanted to swi...

akashra•10/27/24, 11:34 PM

You want to transfer the domain to Cloudflare? Or you want to keep it with the other registrar and just point various resolved domains to Cloudflare?

Aakashra You want to transfer the domain to Cloudflare? Or you want to keep it with the ...

gh0st.•10/27/24, 11:35 PM

point various resolved domains?

akashra•10/27/24, 11:36 PM

do you just want a resolution of an address defined in a zone to ultimately be recognised and usable as an endpoint running on CF?

gh0st.•10/27/24, 11:37 PM

Sorry I'm a beginner and I understood nothing of what you just said

gh0st.•10/27/24, 11:37 PM

But I'm pretty sure I just would want to transfer the domain to CloudFlare

akashra•10/27/24, 11:38 PM

then we'll go back a step. You have a domain: Regardless of where you want your application/api/whatever to run on (in this case, cloudflare being likely), do you want that domain to be managed by cloudflare, or by another provider?

akashra•10/27/24, 11:40 PM

I'm just trying to determine whether you want everything associated with that domain handled and hosted by CF, whether you just want them to be the registrar for it but have DNS still managed by someone else, or whether you just want it hosted elsewhere, but individual domains be pointed to your CF endpoints - because the three have very different answers.

Aakashra then we'll go back a step. You have a domain: Regardless of where you want you...

gh0st.•10/27/24, 11:42 PM

Well I want to make a website and get a domain but I think the free plan on CloudFlare is probably not very good and the other ones are too expensive so I thought of buying a domain on probably Hostinger or another place but if I get more people on my website I would want to switch it to CloudFlare in the future since someone told me it's a pretty good one and Hostinger isn't very good. But basically I would want to transfer the whole domain name to CloudFlare I'm pretty sure

gh0st.•10/27/24, 11:42 PM

Not 100% sure how it all works though xd

akashra•10/27/24, 11:43 PM

The free plan is fine, so long as you have reasonable expectations for traffic and worker load. If you're not familiar with DNS, and you're only doing this one thing with it, then yes, it probably makes the most sense to just have it all managed within the Cloudflare platform just for simplicity alone.

Aakashra The free plan is fine, so long as you have reasonable expectations for traffic a...

gh0st.•10/27/24, 11:45 PM

Just in caseee because I'm also curious but I don't understand like any of the add-ons or anything like that what would happen if too many people started using a website and the website maybe didnt have the necessary add-ons because its the free plan?

akashra•10/27/24, 11:45 PM

Have you run or read through https://developers.cloudflare.com/learning-paths/get-started/#live_website yet ?

Cloudflare Docs

Getting started | Cloudflare Learning Paths

Set up your application to benefit from Cloudflare's speed, security, and reliability.

gh0st.•10/27/24, 11:45 PM

Like if I forgot to upgrade while the website gets more people that start using it or something like that xd

Aakashra Have you run or read through https://developers.cloudflare.com/learning-paths/ge...

gh0st.•10/27/24, 11:45 PM

Uh no I don't think so xd

Ggh0st.Uh no I don't think so xd

akashra•10/27/24, 11:46 PM

Then give that a read before I invest time in trying to help you further, as it might answer what you want to know.

akashra•10/27/24, 11:46 PM

particularly the bits about domains

gh0st.•10/27/24, 11:46 PM

Wait do I read all of them?

gh0st.•10/27/24, 11:46 PM

Oh alright

akashra•10/27/24, 11:47 PM

Also have a look at this bit under the dev console.

gh0st.•10/27/24, 11:49 PM

I did see that but I didn't find anything about transferring domains or what would happen in that scenario

gh0st.•10/27/24, 11:50 PM

wait

gh0st.•10/27/24, 11:50 PM

I'm dumb

gh0st.•10/27/24, 11:50 PM

Is this for transfering the actual like whole domain name subscrition from one domain registrar to another?

gh0st.•10/27/24, 11:53 PM

By the way I'm looking at WordPress right now and it seems extremely limited even with the upgrades and wouldn't Canva be better for making a website template for the visual aspect of the website because I tried making one and it worked pretty well but I would have to buy the Canva subscription to publish it on my own custom domain name but it still seems better for making a website than WordPress since you can customize it more unless I'm missing something?

Ggh0st.Is this for transfering the actual like whole domain name subscrition from one d...

akashra•10/27/24, 11:54 PM

If you want to transfer the whole domain in, yeah.

gh0st.•10/27/24, 11:54 PM

Ohhh I see

gh0st.•10/27/24, 11:55 PM

I think I just looked at the manage domains and register domains and forgot about transfer domains lol

Ggh0st.By the way I'm looking at WordPress right now and it seems extremely limited eve...

gh0st.•10/27/24, 11:55 PM

Do you know this btw?

DDaniFoldi There's no dedicated channel, so if it's a code-related question, I think here o...

kaelys.js•10/28/24, 2:12 AM

Only concern at the moment is exception handling in snippets, what’s the best way?

If any type of error occurs in the snippet how would I know and how should I handle it?

In workers, I’d either catch exceptions and log/report or use tail and send to sentry for example. Can also see error analytics in workers/etc.

Silly goose•10/28/24, 3:18 AM

how do i fix happy eyeballs error

Silly goose•10/28/24, 3:18 AM

SSilly goose Click to see attachment

fry69OP•10/28/24, 6:37 AM

?crossposting => https://discord.com/channels/595317990191398933/812577823599755274/1300297024335380481

Flare•10/28/24, 6:37 AM

Please do not post your question in multiple channels/post it multiple times per the rules at ⁠#

welcome-and-rules. It creates confusion for people trying to help you and doesn't get your issue or question solved any faster.

00xstdsp I have a requirement where I'd like a client to first connect to a worker via we...

kev-ac•10/28/24, 2:00 PM

Sure. Generally speaking: Connect the client to the worker via a DO (https://developers.cloudflare.com/durable-objects/examples/websocket-hibernation-server/) and create another HTTP endpoint for the external endpoint and send it to the DO, which can relay it to all or specific websocket connections.

Cloudflare Docs

Build a WebSocket server with WebSocket Hibernation | Cloudflare Du...

Build a WebSocket server using WebSocket Hibernation on Durable Objects and Workers.

Original message was deleted

Hello, I’m Allie!•10/28/24, 2:29 PM

That looks fine to me?

Hello, I’m Allie!•10/28/24, 2:30 PM

You could also use AsyncLocalStorage if that is what you prefer, but what you have is the most "framework-supported"

00xstdsp Would it be possible without a DO? Like completely stateless? Or is a DO require...

kev-ac•10/28/24, 2:53 PM

The DO manages the long-lived Websocket connection to the client and handles the push of your external services' messages to the client, so it's required.
If you're worried about cost: When using websocket hibernation you don't pay for the pure existance of a websocket connection, just when messages are exchanged, generally speaking.

scheduled(event: ScheduledEvent, env: Bindings, ctx: ExecutionContext) { switch (event.cron) { case "*/5 * * * *": break; case "*/10 * * * *": // Every ten minutes break; case "0 * * * *": // Every hour break; case "0 0 * * *": // Every day break; } },

I liked the two 6 min videos -> https://discord.com/channels/595317990191398933/1296923707792560189/

Similar Threads