DevHeads IoT Integration Server•14mo ago

or anyone can suggest me good Multimeter in $100 range

Ssegfaultdev.elf or anyone can suggest me good Multimeter in $100 range

techielew•11/9/24, 7:23 PM

I know @JeremyCook has some thoughts on this

segfaultdev.elfOP•11/9/24, 7:23 PM

where I can find that?

segfaultdev.elfOP•11/9/24, 7:23 PM

Like I saw a list of good DSO

Aaddalaabderrahim Hello every one i have little problem about scada system on panneaux solaire the...

Umesh Lokhande•11/10/24, 5:17 AM

Hi @addalaabderrahim, if you mean that your Modbus address is 62800, which you use to receive voltage information, then the address for reading voltage will not change. Each Modbus address corresponds to a specific parameter when read, and the data size (whether it's 1 byte or 2 bytes) depends on the documentation's mapping of addresses and their respective parameters. I recommend reviewing the documentation to understand the expected data format for each address. Personally, I follow the sequence of addresses to interpret the data received from Modbus. Hope this may help you, best wishes!

addalaabderrahim•11/10/24, 6:14 AM

Ah yes yes thx man ,i will try mapping all adress and if i get problem i will ask

haha

MMing Given the general interest in AI here, the UK Dept. for Science, Innovation and ...

RED HAT•11/10/24, 8:28 AM

This is an amusing topic, but I have specific concerns regarding

AI's

AI's

involvement in various aspects of

development

development

and its

impact

impact

on our

daily lives

daily lives

and

tasks

tasks

. So far,

AI

AI

has

developed

developed

beyond our

wildest expectations

wildest expectations

, with applications that include

military

military

technology (such as creating

combat gear

combat gear

for

armed

armed

forces in some countries), medical advancements, and neural networks designed to enhance human intellect.

I believe there is a real possibility that the myth of

Full Cell Sufficiency

Full Cell Sufficiency

(FCS) could be realized soon, For the fact that computers were fundamentally modeled after the human mind. Some current research may bring about advancements we may not be ready or fully prepared for. I would be interested to hear your thoughts on the integration of

AI

AI

into every field of

human life

human life

. Is this the

right

right

approach, Is it a

positive

positive

negative

negative

development Will it lead humanity into a new era of digital enhancement, or could it be a terrible idea, Some AI systems can now simulate human actions to an mind blowing degree of accuracy, making it difficult to distinguish between human and machine behavior.

Salih Brother•11/10/24, 9:01 AM

Hi everyone, Sunday Robotics is here

kristof-at-embeetle•11/10/24, 9:02 AM

Hey guys,
I want to present to you Mehmet from @sundayrobotics . He has a cool product

kristof-at-embeetle•11/10/24, 9:09 AM

kristof-at-embeetle•11/10/24, 9:09 AM

Ideal for schools, universities and prototyping in general

kristof-at-embeetle•11/10/24, 9:09 AM

Mehmet is completing his website in a few days.

kristof-at-embeetle•11/10/24, 9:10 AM

I invited Mehmet to the DevHeads community. He fits here perfectly

Salih Brother•11/10/24, 9:12 AM

I am an electronics engineer myself guys, its been 16 years

Salih Brother•11/10/24, 9:12 AM

ProBUDDY Kits emerged from the challenges we faced with space limitations and project-related issues. Initially, we used them ourselves, then launched a campaign on Kickstarter to fund the idea. Now, as a small robotics startup, we are offering them to all technical professionals.

Salih Brother•11/10/24, 9:13 AM

Not just for this product ecosystem, but in general, I’ll be delighted to connect and engage with you on technical topics.

RRED HAT This is an amusing topic, but I have specific concerns regarding `AI's` involvem...

ZacckOsiemo•11/10/24, 9:32 AM

amusing and beyond our wildest dreams at the same time.

SSalih Brother I am an electronics engineer myself guys, its been 16 years

techielew•11/10/24, 9:59 AM

Welcome @sundayrobotics . Good to have you onboard. Looking forward to getting to know you. I’d be interested to hear what you mean by space related issues, specifically.

manel•11/10/24, 12:54 PM

hey guys I want to do a real time system project using esp32 board is there any free courses suggestions and maps

manel•11/10/24, 12:54 PM

I am a total beginner by the wya

Mmanel hey guys I want to do a real time system project using esp32 board is there any ...

ZacckOsiemo•11/10/24, 1:01 PM

Hey! Welcome, if you look at our RTOS sessions you should be able to do this check out Engineering hour sessions on FreeRTOS they should translate to ESP32 since it is based on that, shout if you need a hand.

Umesh Lokhande•11/10/24, 2:51 PM

Hi @Rushi , welcome to the server! We'd love to hear a bit about you and what you're working on in embedded systems and RTOS. Feel free to ask any technical questions if you have them. Have a great day!

ZZacckOsiemo Hey! Welcome, if you look at our RTOS sessions you should be able to do this ch...

manel•11/10/24, 3:06 PM

Hey where I find those sessions

Mmanel Hey where I find those sessions

nour_oud•11/10/24, 3:15 PM

YouTube: https://www.youtube.com/@DevHeads

YouTube

DevHeads

Welcome to the official DevHeads YouTube Channel!

We're a community of professional developers and engineers dedicated to advancing technology, with a focus on IoT solutions. Our mission is to provide personalized software and hardware solutions that help businesses thrive.

What to Expect:

Knowledge Sharing: Guides on embedded systems, Io...

manel•11/10/24, 3:16 PM

Thank you

techielew•11/10/24, 4:25 PM

Hi @Event Pings,
If you attended today's session on FreeRTOS and TF Lite for gesture recognition, the Github repo of the example project had been set to private but is now public. You can find it here: https://github.com/DevHeadsCommunity/gestures-with-freeRTOS.

Maariam•11/10/24, 4:27 PM

thank you!

Ttechielew Welcome @sundayrobotics . Good to have you onboard. Looking forward to getting t...

Salih Brother•11/10/24, 10:40 PM

Thank you @techielew let me explain that.. We engineers and developers often work on multiple hardware and software projects within a small space.. Especially while rents are going higher and higher.. Our workspace is filled with numerous interconnected electronic boards and cables, which can quickly turn into a chaotic environment. In this chaos, a short circuit or a loose connection can cost us days of valuable time.. So, around 2 years ago, as we were struggling with problems in our small and chaotic workspace, we started searching for a solution that could organize our electronic work environment. We created metal plates and magnetic holders, attaching all our project components—electronic circuits, sensors, and cables—to these plates. As a result, the errors we previously encountered were eliminated, and we began working in a highly organized manner.

We even found a way to hang our projects on the walls of our workspace. Later, we designed racks for these metal plates, allowing us to store 6-8 projects within them. This made it easy to take a project from the wall or rack, place it on our desk, and switch it out for a new one when needed. Thanks to this system, we went from being able to work on 1-2 chaotic projects in a small space to efficiently handling 8-10 organized projects in the same area. Carrying and demonstrating the projects became much more easier and professional-looking.

We further developed this product family, converted it into an ecosystem and named it ProBUDDY Kits. Now it has 50+ items covering many types of holders, baseplates, stands, racks, electronics to 3d printable files.. Now it became so helpful for almost any project, any scenario

ke7c2mi•11/10/24, 11:17 PM

This speaks direcly to me and I am eyeing the kickstarter ... I currently have several boards strewn in the space under my monitor. I was thinking to get some copper clad board and drill it with standoffs to tidy things up for just that project.

I've always wanted some sort of rack I could keep a set of shelves in and put one on my desk when I needed it (i.e. the shelves come out of the rack to sit on the desk)

But it looks like you have nailed the concept and made it slick

SSalih Brother Thank you @techielew let me explain that.. We engineers and developers often wor...

techielew•11/10/24, 11:32 PM

Are the 3D files open and available somewhere to check out?

Aaddalaabderrahim Ah yes yes thx man ,i will try mapping all adress and if i get problem i will as...

Umesh Lokhande•11/11/24, 6:02 AM

Sure, feel free to post a question

Mmanel hey guys I want to do a real time system project using esp32 board is there any ...

Umesh Lokhande•11/11/24, 6:15 AM

I feel the best way to start is by experimenting with the ESP32 Dev Kit with Arduino API and IDE to get comfortable with the features it offers. Then, later, you can migrate to the ESP-IDF Framework to get the most out of the ESP mcu for your project. You can use free YouTube video resources, and feel free to ask specific questions here. The community will be happy to help you. Best wishes for your learning journey!

Ttechielew Are the 3D files open and available somewhere to check out?

Salih Brother•11/11/24, 7:33 AM

The 3D designs are created to hold various elements that can be used in projects and are prepared to be compatible with ProBUDDY Kits. The website sundayrobotics.com will be online in few days, If anyone from this forum wants to purchase our products, I can offer additional consultancy and extra discounts to better identify their needs. Would this be appropriate?

Typhlosion31•11/11/24, 12:07 PM

Arreojn•11/11/24, 12:24 PM

hi, im new here hoping to learn lots of IoT here

TTyphlosion31 hi

Marvin•11/11/24, 12:31 PM

Hey @Typhlosion31 welcome. What do you do and what are you currently working on?

AArreojn hi, im new here hoping to learn lots of IoT here

Marvin•11/11/24, 12:33 PM

Hey @Arreojn
Welcome. Lots of resource here to get you up ans running.
Please checkout the devheads Youtube.
https://www.youtube.com/@DevHeads

YouTube

DevHeads

Welcome to the official DevHeads YouTube Channel!

Knowledge Sharing: Guides on embedded systems, Io...

MMarvin Hey @Typhlosion31 welcome. What do you do and what are you currently working on?

Typhlosion31•11/11/24, 1:18 PM

Hello there
I am an embedded developer, I work on TI, STM, ESP microcontrollers

Typhlosion31•11/11/24, 1:19 PM

Well, right now I am working on this industrial generator which as TI microcontroller. Its pretty advance project

Typhlosion31•11/11/24, 1:19 PM

CAN J1939 protocols and other stuff

Typhlosion31•11/11/24, 1:21 PM

This is my office profile and personally I make electronics projects such as ESP marauder, cyberdecks using raspberry pi, location trackers, etc...

Typhlosion31•11/11/24, 1:21 PM

:cat_hi_animated:

Marvin•11/11/24, 1:38 PM

That sounds very great.
I have heard ESP marauder, just got a M5stickc plus been playing around with it.

Ssegfaultdev.elf or anyone can suggest me good Multimeter in $100 range

JeremyCook•11/11/24, 2:25 PM

Hello, yes I do have some thoughts, as @techielew notes. I did a review of the OWON HDS2102S meter/scope/signal generator some time ago: https://embeddedcomputing.com/technology/debug-and-test/oscilloscopes-analyzers-generators/owon-hds2102s-250-handheld-scope-review

which is in the $250 range. I still use it quite a bit, and like it, though on the negative side there is a delay with some measurements, and I really don't use the signal generator function. Also the battery life isn't great.

hat being said, you can find what looks like the same style of meter/scope on Amazon: https://amzn.to/3AoxfIM (affiliate) for just over $100, with what looks like (at a quick glance) reduced specs compared to what I have. I also have a Fluke 179 that has worked for roughly 2 decades, has excellent battery life, and takes measurements quickly. Looks like they are more expensive, but I guess you get what you pay for.

Embedded Computing Design

OWON HDS2102S: ~$250 Handheld Scope Review - Embedded Computing Design

Depending on your level of electronics knowledge, work, and/or experimentation, a voltmeter may be sufficient for your diagnostic needs. However, being able to see the way an electronic signal changes over time, or perhaps even multiple signals, takes your analysis capabilities to a whole new level.

OWON HDS242 Handheld Digital Oscilloscope Multimeter 2CH USB TypeC ...

OWON HDS242 Handheld Digital Oscilloscope Multimeter 2CH USB TypeC 40MHz 3.5 LCD Test Meter

fei•11/11/24, 3:09 PM

Hi, I am a full stack developer, I work with frontend, backend, mobile, databases to cloud servers.
I'm currently working on a project where I require a big enough RFID reader to detect RFID cutlery embedded plates. Not sure what type of RFID reader I would need. Am here to learn about RFID in general and also find the information I need.

Ffei Hi, I am a full stack developer, I work with frontend, backend, mobile, database...

ZacckOsiemo•11/11/24, 3:32 PM

you likely need UHF RFID you can use that to do inventory as you describe

Ffei Hi, I am a full stack developer, I work with frontend, backend, mobile, database...

ZacckOsiemo•11/11/24, 3:33 PM

you would need an antennna a reader and some tags to be read and written to, the standard is defined so you can buy off the shelf hardware and software or do it yourself.

techielew•11/11/24, 10:09 PM

@Event Pings,
This week's Office Hours meetup topic is: https://discord.gg/cHNGvqMJG9?event=1305642842210959411

Ttechielew @Event Pings, This week's Office Hours meetup topic is: https://discord.gg/cHNGv...

techielew•11/11/24, 10:11 PM

Would be great to get some use cases and challenges you've all experienced queued up so we can address them in the open discussion portion of Friday's meetup.

ZZacckOsiemo you would need an antennna a reader and some tags to be read and written to, the...

fei•11/12/24, 1:52 AM

If I require something that detects in a certain area, for example a food tray. Would that work?

Ffei If I require something that detects in a certain area, for example a food tray. ...

ZacckOsiemo•11/12/24, 3:20 AM

oh yes it would it can work in the order of meters.

or anyone can suggest me good Multimeter in $100 range

Similar Threads

Similar Threads

Similar Threads