DevHeads IoT Integration Server•14mo ago

:salute: will use this, thanks Zacc

Ffei :salute: will use this, thanks Zacc

ZacckOsiemo•11/12/24, 5:04 AM

let us know if you get stuck, and once antennas give you issues, we have some people obsessed with beams

feiOP•11/12/24, 5:05 AM

have to first pre order the equipments from china after doing some research on the available communicaiton protocol and frequency they offer

Ffei have to first pre order the equipments from china after doing some research on t...

ZacckOsiemo•11/12/24, 5:08 AM

good idea what are you ordering readers and antennas?

ZacckOsiemo•11/12/24, 5:09 AM

that's a good strategy, my first foray into this, being a software developer was to make it myself, boy did I mess up

ZZacckOsiemo good idea what are you ordering readers and antennas?

feiOP•11/12/24, 6:09 AM

For now only the reader but from what u are implying seems like because i need to use the antennas to direct and shape the signal to the designated area from under the table

feiOP•11/12/24, 6:09 AM

ill need to check with the supplier

feiOP•11/12/24, 6:10 AM

yea, i also started from E&E but I started work as a fullstack engineer

, and now after having more experience in software development, trying to go back to my roots since with the advent of AI it seems like its kinda the way

Ffei For now only the reader but from what u are implying seems like because i need t...

ZacckOsiemo•11/12/24, 6:11 AM

yes and take care to ensure your reader and antenna have compatible connection points. You may also be operating at such a small range that an internal antenna may work ask about that as well.

Ffei yea, i also started from E&E but I started work as a fullstack engineer 😂 , and...

ZacckOsiemo•11/12/24, 6:12 AM

I'll be honest I'm a software person through and through the closest I got t electronics was uni physics modules

ZZacckOsiemo yes and take care to ensure your reader and antenna have compatible connection p...

feiOP•11/12/24, 6:13 AM

ahh thats insightful, will keep that in mind while reading more

Ffei ahh thats insightful, will keep that in mind while reading more

ZacckOsiemo•11/12/24, 6:13 AM

yeah all these are the things that messed me up

feiOP•11/12/24, 6:14 AM

was afraid of these mishaps, these tips could hopefully save me the trip down that rabbit hole

feiOP•11/12/24, 6:15 AM

haha

Ttechielew @Ready to Work, there's an organization looking for assembly developers. Like, r...

techielew•11/12/24, 7:52 AM

@666Yami_kaze999 @RakeshWasnik @wafa_ath @Marvee Amasi @Renuel Roberts @boualleg sabrina -- It appears they're leaking information about this position but I will keep updates going here: jobsAssembly Developers Wanted

vinii2508•11/12/24, 11:47 AM

someone here have worked with node red, modbus, opcua?

Vvinii2508 someone here have worked with node red, modbus, opcua?

Umesh Lokhande•11/12/24, 11:58 AM

Hey Vini, not the exact combination but feel free to post questions. You can expect some help with Node-RED and Modbus

vinii2508•11/12/24, 12:07 PM

im trying to read a variable from my plc and send it to an opcua server, using node-red, but i can’t send, the read is okay

Vvinii2508 im trying to read a variable from my plc and send it to an opcua server, using n...

Umesh Lokhande•11/12/24, 12:16 PM

could you please share the node flow you designed to extract the variable value. Provide more info. about the things you have done or tried so far.

UUmesh Lokhande could you please share the node flow you designed to extract the variable value....

vinii2508•11/12/24, 12:31 PM

flow.txt11.21KB

vinii2508•11/12/24, 12:31 PM

vinii2508•11/12/24, 12:51 PM

for some reason the variable is not saving the value read from modbus and gives me 0

Vvinii2508 for some reason the variable is not saving the value read from modbus and gives ...

Umesh Lokhande•11/12/24, 4:04 PM

I'm not sure what exact data and in what format you're getting from Modebus. I hope you've created custom the function to properly store data in the correct format before you print on the node-red debug console. Here is a detailed video about processing and storing data https://www.youtube.com/watch?v=IpwihQf6Kqo video timestamp: 08:58 Function Node - Storing and retrieving from variables

fbiego•11/13/24, 8:08 AM

Hello! I'm Felix, an Embedded Software Engineer. I've been working on various projects with LVGL and ESP32, and I'm excited to share some of my work here. Looking forward to connecting with you all!

Ffbiego Hello! I'm Felix, an Embedded Software Engineer. I've been working on various pr...

Marvin•11/13/24, 8:18 AM

Welcome @fbiego .
Excited to hear/see what you share.

Ffbiego Hello! I'm Felix, an Embedded Software Engineer. I've been working on various pr...

ZacckOsiemo•11/13/24, 11:07 AM

hey! i have seen you on LinkedIn

you have the nice displays!

Ffbiego Hello! I'm Felix, an Embedded Software Engineer. I've been working on various pr...

ZacckOsiemo•11/13/24, 11:08 AM

I wonder whats the one you are working on now?

fbiego•11/13/24, 1:07 PM

fbiego•11/13/24, 1:08 PM

LVGL based UI for ESP32 displays
https://github.com/fbiego/esp32-c3-mini

GitHub

GitHub - fbiego/esp32-c3-mini: LVGL UI for ESP32 C3 mini 240*240 b...

LVGL UI for ESP32 C3 mini 240*240 board (ESP32-2424S012) - fbiego/esp32-c3-mini

bijuice•11/13/24, 6:59 PM

Hello good people

,

My name is Abdul, I was invited to this server by @32bitSaviour. I'm into everything web and work as a full-stack engineer. I'm super passionate about tech mentorship and volunteer at a non-profit called KamiLimu that aims to upskill university students. I am also very curious about open source. I haven't had the chance to contribute to it in a meaningful way but it is one of my short term goals at the moment.

Bbijuice Hello good people 👋🏽, My name is Abdul, I was invited to this server by @32bi...

ZacckOsiemo•11/13/24, 7:01 PM

Mambo! do you dabble in any embedded, IOT or electronics work? We would like to hear more about any of that

bijuice•11/13/24, 7:05 PM

No I do not but I would wanna try getting into low level programming. I feel like it's a part of my skillset that I could improve

Bbijuice Hello good people 👋🏽, My name is Abdul, I was invited to this server by @32bi...

Marvin•11/13/24, 7:06 PM

Me and dude have worked together.

Marvin•11/13/24, 7:06 PM

@bijuice has greatly helped me get my hardware.

MMarvin Me and dude have worked together.

bijuice•11/13/24, 7:07 PM

Hahaha we had some good times at Pesapal

Bbijuice No I do not but I would wanna try getting into low level programming. I feel lik...

Marvin•11/13/24, 7:07 PM

You are in the right place.

Marvin•11/13/24, 7:08 PM

We have some great videos. Oh and you misssed a beautiful session today.

Marvin•11/13/24, 7:09 PM

Here.
https://www.youtube.com/@DevHeads

YouTube

DevHeads

Welcome to the official DevHeads YouTube Channel!

We're a community of professional developers and engineers dedicated to advancing technology, with a focus on IoT solutions. Our mission is to provide personalized software and hardware solutions that help businesses thrive.

What to Expect:

Knowledge Sharing: Guides on embedded systems, Io...

Marvin•11/13/24, 7:09 PM

All our content resides there.

MMarvin Here. https://www.youtube.com/@DevHeads

bijuice•11/13/24, 7:11 PM

Subscribed. Thanks

keya254•11/13/24, 7:12 PM

Brian here got invited by theo passionate about IoT nothing much

Marvin•11/13/24, 7:17 PM

Welcome @keya254 what are you working on?

Kke7c2mi @techielew I was just reading the scroll back, this is quite interesting, it als...

techielew•11/13/24, 7:48 PM

@Ming @Phoenix, anyone else interested in helping us build out infrastructure to remote into platforms for dev purposes? The idea would be to create something that allows attendees of events apply the learnings on a remote node.

Me, @ke7c2mi and @ZacckOsiemo met yesterday to outline the general concept and are looknig for volunteers to help. If you are interested either like this, reply, or DM me.

Thx

Ttechielew @Ming @Phoenix, anyone else interested in helping us build out infrastructure to...

Ming•11/13/24, 7:53 PM

I’m definitely up for it.

Phoenix•11/13/24, 7:54 PM

yes count me in

nour_oud•11/13/24, 9:31 PM

Office Hours Alert! Join us for “�� ?”
Learn top strategies for firmware protection, secure updates, and defending against cyberattacks.
Don’t miss it!
https://discord.gg/FePxxTwt?event=1305642842210959411

Red Chilli 🌶•11/14/24, 1:29 AM

Hi! good morning everyone

RRed Chilli 🌶Hi! good morning everyone

techielew•11/14/24, 1:53 AM

Welcome Red Chilli. What’s your background?

aymen ammari•11/14/24, 3:50 AM

Hi Devs, during my training about CNC machines manufacturing in Foshan, China. I encountered a few machines during test, I was so amazed by the amount of precision that they reached, I took this video and I would like to share it with you, tell me your thoughts

ZacckOsiemo•11/14/24, 4:30 AM

wait!

Aaymen ammari Hi Devs, during my training about CNC machines manufacturing in Foshan, China. I...

techielew•11/14/24, 4:30 AM

What is your training for? General control?

:salute: will use this, thanks Zacc

Similar Threads

Similar Threads

Similar Threads