DevHeads IoT Integration Server•13mo ago

Your Raspberry Pi isn’t detecting the IMX219-160 camera module. Verify Detection Check with `vcgenc

Your Raspberry Pi isn’t detecting the IMX219-160 camera module.
Verify Detection Check with

vcgencmd get_camera

vcgencmd get_camera

. It should show

detected=1

detected=1

ZZacckOsiemo Hey team I am facing an issue, I have a raspberry pi 0 2W and I am trying to in...

Umesh Lokhande•12/2/24, 2:00 PM

Try following steps:
1. Install bullseye os on your raspberry pi
2. After booting raspberry pi enter below commands

sudo raspi-config-> interface-> enable libcamera-> save->reboot

sudo raspi-config-> interface-> enable libcamera-> save->reboot

sudo nano /boot/config.txt

sudo nano /boot/config.txt

(enter this command, scroll down till last [all]) under [all] enter the command "dtoverlay=imx708"
Now, save and reboot raspberry pi
Enter libcamera command-

sudo libcamera -hello t 0

sudo libcamera -hello t 0

And check if the camera is detecting or not

RRenuel Roberts Your Raspberry Pi isn’t detecting the IMX219-160 camera module. Verify Detection...

ZacckOsiemo•12/2/24, 2:00 PM

@Renuel Roberts supported=0 detected=0, libcamera interfaces=0

UUmesh Lokhande Try following steps: 1. Install bullseye os on your raspberry pi 2. After bootin...

ZacckOsiemo•12/2/24, 2:03 PM

I think I am on too new a version to get this option here is my OS version

PRETTY_NAME="Debian GNU/Linux 12 (bookworm)"
NAME="Debian GNU/Linux"
VERSION_ID="12"
VERSION="12 (bookworm)"
VERSION_CODENAME=bookworm
ID=debian
HOME_URL="https://www.debian.org/"
SUPPORT_URL="https://www.debian.org/support"
BUG_REPORT_URL="https://bugs.debian.org/"

PRETTY_NAME="Debian GNU/Linux 12 (bookworm)"
NAME="Debian GNU/Linux"
VERSION_ID="12"
VERSION="12 (bookworm)"
VERSION_CODENAME=bookworm
ID=debian
HOME_URL="https://www.debian.org/"
SUPPORT_URL="https://www.debian.org/support"
BUG_REPORT_URL="https://bugs.debian.org/"

Basically I dont get camera in raspi-config

ZZacckOsiemo @Renuel Roberts supported=0 detected=0, libcamera interfaces=0

Renuel RobertsOP•12/2/24, 2:03 PM

this results indicate that d rpi doesnt recognise the camera module, check ur configuration

RRenuel Roberts this results indicate that d rpi doesnt recognise the camera module, check ur co...

ZacckOsiemo•12/2/24, 2:04 PM

I'm aware thanks

ZZacckOsiemo I think I am on too new a version to get this option here is my OS version ```...

Umesh Lokhande•12/2/24, 2:04 PM

In new Raspberry Pi OS you may not get camera. As it is enabled by default.

UUmesh Lokhande In new Raspberry Pi OS you may not get camera. As it is enabled by default.

ZacckOsiemo•12/2/24, 2:04 PM

yes that's what the docs say

ZZacckOsiemo I'm aware thanks

Renuel RobertsOP•12/2/24, 2:05 PM

check ur configurations in this file

sudo nano /boot/config.txt

sudo nano /boot/config.txt

Renuel RobertsOP•12/2/24, 2:05 PM

if this parts are commented

dtoverlay=imx219
start_x=1
gpu_mem=128

dtoverlay=imx219
start_x=1
gpu_mem=128

RRenuel Roberts check ur configurations in this file `sudo nano /boot/config.txt`

ZacckOsiemo•12/2/24, 2:05 PM

that file moved to

/boot/firmware/config.txt

/boot/firmware/config.txt

and I have checked it

Renuel RobertsOP•12/2/24, 2:06 PM

then i suggest u update and reboot the system

ZZacckOsiemo yes that's what the docs say

Umesh Lokhande•12/2/24, 2:06 PM

So I suggested to go got Bullseye release of Raspberry Pi OS and then try Camera. last time i tried with new RPi OS , there were lot of issues. This may save your time.

ZacckOsiemo•12/2/24, 2:08 PM

Do these optioons matter if I am on headless rpi?

ZZacckOsiemo Do these optioons matter if I am on headless rpi?

Umesh Lokhande•12/2/24, 2:09 PM

it depends on on which RPi OS you're using Camera with

ZZacckOsiemo Do these optioons matter if I am on headless rpi?

Renuel RobertsOP•12/2/24, 2:09 PM

re u running the camera over ssh??

UUmesh Lokhande it depends on on which RPi OS you're using Camera with

ZacckOsiemo•12/2/24, 2:14 PM

Bookworm for now

RRenuel Roberts re u running the camera over ssh??

ZacckOsiemo•12/2/24, 2:15 PM

yep

ZZacckOsiemo Bookworm for now

Umesh Lokhande•12/2/24, 2:19 PM

It's been 6+ months for me and not sure if the camera-related issues been fixed in new updates of rpi os but if you find it difficult to resolve then move to A stable legacy version of Raspberry Pi OS Bullseye.

UUmesh Lokhande It's been 6+ months for me and not sure if the camera-related issues been fixed ...

ZacckOsiemo•12/2/24, 2:21 PM

I will consider that shortly

ZZacckOsiemo yep

Renuel RobertsOP•12/2/24, 2:27 PM

can u verify the camera module is working on its own

RRenuel Roberts can u verify the camera module is working on its own

ZacckOsiemo•12/2/24, 2:38 PM

that would be difficult as I dont have a way to use the cable with another device \

ZacckOsiemo•12/2/24, 2:39 PM

I may consider yocto the other versions of raspian dont work

ZacckOsiemo•12/2/24, 2:53 PM

are all the apt mirrors for the pi slow? does an update take forever for everyonr?

ZZacckOsiemo are all the apt mirrors for the pi slow? does an update take forever for everyon...

Renuel RobertsOP•12/2/24, 3:16 PM

the mirrior ur using is it closer to ur location

RRenuel Roberts the mirrior ur using is it closer to ur location

ZacckOsiemo•12/2/24, 3:17 PM

yeah I selected local ones but the times are still long

Renuel RobertsOP•12/2/24, 3:18 PM

try using apt-fast it might speed things up

RRenuel Roberts try using apt-fast it might speed things up

ZacckOsiemo•12/2/24, 3:20 PM

Oh snap, when the current update finishes I will check

ZZacckOsiemo Oh snap, when the current update finishes I will check

segfaultdev.elf•12/2/24, 3:21 PM

what you are cooking man

segfaultdev.elf•12/2/24, 3:21 PM

let me know

Ssegfaultdev.elf let me know

ZacckOsiemo•12/2/24, 3:47 PM

trying to an IMX219 camera to work with a rpi 0 2w, reading the forums I think its a combo of the new OS and the camera not working. Solutions exist for the Bullseye version of the OS but not for the newer ones.

ZacckOsiemo•12/2/24, 3:49 PM

I don't really want to downgrade and reflash but that may be the only option I have at the moment but lets us see after the current update, I don't know why it is loading at 20KB/s

ZacckOsiemo•12/2/24, 3:50 PM

might really be easier to do this on yocto