TAHAH
Tthanks!
Cshould go Full (Strict) or Strict (SSL-Only)
Cenough to disable the redirect? sure.
something you should use in production? never
something you should use in production? never
Tyeah, it was disabled and then http->https redirects were enabled
Tso it got into a little loopies
CI thought R2 Custom Domains were HTTPS only/enforced by the zone under the R2 Custom Domain, evidently not tho
HThis is via the latest 
be up to date
rcloneWill check later
HI have an old
provider = UnknownIsn't Server-Copy a standard thing for S3?
HCan
rclone
FMay I ask could we expect somewhere in future to be able to filter buckets on the bucket list, e.g. per location / jurisdiction? 
Might be it's able to do it via API, but not on the Dashboard, yet.
Thank you!
Might be it's able to do it via API, but not on the Dashboard, yet.
Thank you!
FIf we have e.g. sub-domain on bucket, example:
a) mydomain.hr is main domain
b) then I've got sub-domain sub.mydomain.hr
c) for r2.sub.mydomain.hr -> do I need to pruchase Advanced Certificate Manager to cover that R2 Custom domain which seems to me to be an deep-level sub-domain?
a) mydomain.hr is main domain
b) then I've got sub-domain sub.mydomain.hr
c) for r2.sub.mydomain.hr -> do I need to pruchase Advanced Certificate Manager to cover that R2 Custom domain which seems to me to be an deep-level sub-domain?
EI wonder if this is related to my issue...
Eit's a periodic seize up issue
Ejust goes non responsive
Ei do the same operation maybe 500 times and it has various amounts of latency from non to 20 seconds to a full timeout
Ethis is a get operation
Every few
Ein what timeframe?
Eno
Eit depends on if a CI job is running. but typically none for a significant block of time
Eso when doing this test probably 0
Ewhen i did the rclone from digital ocean i was also seeing intermittent full hangs. not sure if that's similar to what you mentioned. at the time i couldn't tell if it was them or R2
Eshould not be unstable...
FIt works! No need to purchase ACM 
Tested few moments ago
Tested few moments ago
Eyes but this just started happening when switching to R2. same application did not show this behavior with digital ocean
Ealso since it's gitlab i can't easily change the code
Enot a runner. it's the server backend
Ewhich i am running self hosted
Tohhh, it was using "automatic" which made a recommendation of disabling ssl
KHi folks, is there any cloudflare native services can do file scan like AWS GuardDuty ?
RHello everyone,
We are uploading an image to R2 using a presigned URL. As part of our workflow, once the upload is successful, we immediately make a request to retrieve the image using another presigned URL.
However, we are occasionally encountering issues where the request to retrieve the image fails with errors such as "Blocked by ORB" or a 404 (Not Found).
Is there a known delay between the upload and the image becoming available for retrieval? How can we address this issue to ensure the image is reliably accessible immediately after the upload?
We are uploading an image to R2 using a presigned URL. As part of our workflow, once the upload is successful, we immediately make a request to retrieve the image using another presigned URL.
However, we are occasionally encountering issues where the request to retrieve the image fails with errors such as "Blocked by ORB" or a 404 (Not Found).
Is there a known delay between the upload and the image becoming available for retrieval? How can we address this issue to ensure the image is reliably accessible immediately after the upload?
PHi guys! This seems like a very simple thing but this puzzles me a lot. I was trying to access my R2 bucket using boto3 (using Ubuntu running inside Docker) but I received a TLS handshake error.
Long story short it seems OpenSSL is raising an alert number 40 if I don't specify Server Name Indication (SNI)
This is reflected using the openssl client
$ openssl s_client -connect <account_id>.r2.cloudflarestorage.com:443
CONNECTED(00000003)
407732BA387F0000:error:0A000410:SSL routines:ssl3_read_bytes:sslv3 alert handshake failure:../ssl/record/rec_layer_s3.c:1599:SSL alert number 40
But if I specify the SNI with
$ openssl s_client -connect <account_id>.r2.cloudflarestorage.com:443 -servername cloudflarestorage.com
CONNECTED(00000003)
Then there is not error.
Why should I present the servername and how should this be done with boto3?
Long story short it seems OpenSSL is raising an alert number 40 if I don't specify Server Name Indication (SNI)
This is reflected using the openssl client
$ openssl s_client -connect <account_id>.r2.cloudflarestorage.com:443
CONNECTED(00000003)
407732BA387F0000:error:0A000410:SSL routines:ssl3_read_bytes:sslv3 alert handshake failure:../ssl/record/rec_layer_s3.c:1599:SSL alert number 40
But if I specify the SNI with
$ openssl s_client -connect <account_id>.r2.cloudflarestorage.com:443 -servername cloudflarestorage.com
CONNECTED(00000003)
Then there is not error.
Why should I present the servername and how should this be done with boto3?
TI use R2 for store data of my application. I don't know why my user download files from R2 so slow, very slow. I use paid version, but it's very slow
TAnyone meet this problem? Please help
Ahi, has anyone encountered this error?
AGraphQL error: 'limit' must be positive number and not greater than 10000 for account "***"
ABucketLevelMetricsQuery
Ai have zero buckets
Ai created r2 today
Ait's interesting
Ayep
Ai think it's releated this
Ai solved this error with
npx wrangler r2 bucket create test-bucket
npx wrangler r2 bucket create test-bucket
Amaybe it's helps anyone
YHi I am having the following error. Does it have to do with the Billing Subscription Update and Invoice Issues? as this is a new account and I just created the bucket? thanks
