I found that my hyperdriver was never able to connect to the remote library of supabase locally. The

YYu I found that my hyperdriver was never able to connect to the remote library of s...

A

AJR•12/23/24, 3:55 PM

Local dev mode (i.e.

wrangler dev

wrangler dev

) does not currently support connecting to remote databases that require SSL. It is a known gap that we are hoping to address in the future.

AAJR Local dev mode (i.e. `wrangler dev`) does not currently support connecting to re...

Y

YuOP•12/23/24, 4:12 PM

So how do I test and debug locally? Is there any good practice?

A

AJR•12/23/24, 4:16 PM

Couple options.

One is to have a local DB (I keep this alias in my bashrc:
```
docker run -d -e POSTGRES_PASSWORD=password -p 5433:5432 postgres:16 -c ssl=on -c ssl_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem -c ssl_key_file=/etc/ssl/private/ssl-cert-snakeoil.key
```
docker run -d -e POSTGRES_PASSWORD=password -p 5433:5432 postgres:16 -c ssl=on -c ssl_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem -c ssl_key_file=/etc/ssl/private/ssl-cert-snakeoil.key
```
docker run -d -e POSTGRES_PASSWORD=password -p 5433:5432 postgres:16 -c ssl=on -c ssl_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem -c ssl_key_file=/etc/ssl/private/ssl-cert-snakeoil.key
```
docker run -d -e POSTGRES_PASSWORD=password -p 5433:5432 postgres:16 -c ssl=on -c ssl_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem -c ssl_key_file=/etc/ssl/private/ssl-cert-snakeoil.key
)
Use
```
wrangler dev --remote
```
```
wrangler dev --remote
```
which spawns an ephemeral Worker and will behave like a normal Worker. Still wants a
```
localConnectionString
```
```
localConnectionString
```
but will use the Hyperdrive binding you give it instead.
Use a remote DB that allows connections with
```
sslmode=disable
```
```
sslmode=disable
```
(this is probably the hardest to mange given I don't think Supabase supports that)

Y

YuOP•12/23/24, 4:29 PM

I have tried the third method, but supabase does not support it.

K

kchro3•12/24/24, 12:40 AM

Hey, are there any issues with Hyperdrive today? I've been getting 504s for the last half hour or so

A

AJR•12/24/24, 12:52 AM

Let me take a look real quick

K

kchro3•12/24/24, 12:56 AM

Thank you! It looks like I'm getting connection timeouts to my RDS

A

AJR•12/24/24, 12:57 AM

No, no changes in general behavior on our monitoring, no releases going out today or anything like that

K

kchro3•12/24/24, 12:57 AM

[wrangler:inf] GET ... 500 Internal Server Error (30722ms)
Error: write CONNECT_TIMEOUT ...:5432
    at RG (file:///Users//.wrangler/tmp/dev-pvRk1H/index.js:67:18734)
    at n (file:///Users//.wrangler/tmp/dev-pvRk1H/index.js:78:3715)
    at cachedError (file:///Users//.wrangler/tmp/dev-pvRk1H/index.js:67:6484)
    at new Query (file:///Users//.wrangler/tmp/dev-pvRk1H/index.js:67:4794)
    at Ve (file:///Users//.wrangler/tmp/dev-pvRk1H/index.js:88:1506)
    at getTemplateRules (file:///Users//.wrangler/tmp/dev-pvRk1H/index.js:769:3897) {
  code: CONNECT_TIMEOUT,
  errno: CONNECT_TIMEOUT,
  address: ...,
  port: 5432,
  stack: Error: write CONNECT_TIMEOUT .../.wrangler/tmp/dev-pvRk1H/index.js:769:3897)
  ...
}

[wrangler:inf] GET ... 500 Internal Server Error (30722ms)
Error: write CONNECT_TIMEOUT ...:5432
    at RG (file:///Users//.wrangler/tmp/dev-pvRk1H/index.js:67:18734)
    at n (file:///Users//.wrangler/tmp/dev-pvRk1H/index.js:78:3715)
    at cachedError (file:///Users//.wrangler/tmp/dev-pvRk1H/index.js:67:6484)
    at new Query (file:///Users//.wrangler/tmp/dev-pvRk1H/index.js:67:4794)
    at Ve (file:///Users//.wrangler/tmp/dev-pvRk1H/index.js:88:1506)
    at getTemplateRules (file:///Users//.wrangler/tmp/dev-pvRk1H/index.js:769:3897) {
  code: CONNECT_TIMEOUT,
  errno: CONNECT_TIMEOUT,
  address: ...,
  port: 5432,
  stack: Error: write CONNECT_TIMEOUT .../.wrangler/tmp/dev-pvRk1H/index.js:769:3897)
  ...
}

[wrangler:inf] GET ... 500 Internal Server Error (30722ms)
Error: write CONNECT_TIMEOUT ...:5432
    at RG (file:///Users//.wrangler/tmp/dev-pvRk1H/index.js:67:18734)
    at n (file:///Users//.wrangler/tmp/dev-pvRk1H/index.js:78:3715)
    at cachedError (file:///Users//.wrangler/tmp/dev-pvRk1H/index.js:67:6484)
    at new Query (file:///Users//.wrangler/tmp/dev-pvRk1H/index.js:67:4794)
    at Ve (file:///Users//.wrangler/tmp/dev-pvRk1H/index.js:88:1506)
    at getTemplateRules (file:///Users//.wrangler/tmp/dev-pvRk1H/index.js:769:3897) {
  code: CONNECT_TIMEOUT,
  errno: CONNECT_TIMEOUT,
  address: ...,
  port: 5432,
  stack: Error: write CONNECT_TIMEOUT .../.wrangler/tmp/dev-pvRk1H/index.js:769:3897)
  ...
}

[wrangler:inf] GET ... 500 Internal Server Error (30722ms)
Error: write CONNECT_TIMEOUT ...:5432
    at RG (file:///Users//.wrangler/tmp/dev-pvRk1H/index.js:67:18734)
    at n (file:///Users//.wrangler/tmp/dev-pvRk1H/index.js:78:3715)
    at cachedError (file:///Users//.wrangler/tmp/dev-pvRk1H/index.js:67:6484)
    at new Query (file:///Users//.wrangler/tmp/dev-pvRk1H/index.js:67:4794)
    at Ve (file:///Users//.wrangler/tmp/dev-pvRk1H/index.js:88:1506)
    at getTemplateRules (file:///Users//.wrangler/tmp/dev-pvRk1H/index.js:769:3897) {
  code: CONNECT_TIMEOUT,
  errno: CONNECT_TIMEOUT,
  address: ...,
  port: 5432,
  stack: Error: write CONNECT_TIMEOUT .../.wrangler/tmp/dev-pvRk1H/index.js:769:3897)
  ...
}

this is the error i'm seeing in my dev remote instance

A

AJR•12/24/24, 12:58 AM

Hmmm. DM me your config if you wouldn't mind, and I'll take a look when I'm at my desk.

How regular? 1 in 100 requests? 1 in 100000?

K

kchro3•12/24/24, 12:59 AM

my wrangler toml?

K

kchro3•12/24/24, 1:00 AM

all requests look like they're failing

AAJR Couple options. * One is to have a local DB (I keep this alias in my bashrc: `...

Y

YuOP•12/24/24, 6:14 AM

Use wrangler dev --remote, but can not connect the remote worker, it show the bug : Failed to unregister worker TypeError: fetch failed

P

plurk•12/27/24, 6:08 PM

I'm trying to make hyperdrive work in a svelte-kit project that uses drizzle. All the examples of hyperdrive usage I could find get

env

env

in the request, but in my project drizzle configuration is defined in a separate file:

const client = postgres(process.env.db || DATABASE_URL, {
  ssl: DATABASE_SSL === 'true',
  prepare: false
});

export const db = drizzle(client, { schema });

const client = postgres(process.env.db || DATABASE_URL, {
  ssl: DATABASE_SSL === 'true',
  prepare: false
});

export const db = drizzle(client, { schema });

const client = postgres(process.env.db || DATABASE_URL, {
  ssl: DATABASE_SSL === 'true',
  prepare: false
});

export const db = drizzle(client, { schema });

const client = postgres(process.env.db || DATABASE_URL, {
  ssl: DATABASE_SSL === 'true',
  prepare: false
});

export const db = drizzle(client, { schema });

I tried to use process.env, but got no luck here. Can anyone please suggest the proper way to pass the hyperdrive url?

Pplurk I'm trying to make hyperdrive work in a svelte-kit project that uses drizzle. Al...

I

Isaac McFadyen•12/28/24, 2:49 AM

You probably want to recreate the Drizzle instance every time. Something like this:

export const createDrizzle = (url: string, ssl: boolean) => {
    const db = postgres(url, {
        ssl
    });
    return drizzle(client, { schema });
};

export const createDrizzle = (url: string, ssl: boolean) => {
    const db = postgres(url, {
        ssl
    });
    return drizzle(client, { schema });
};

export const createDrizzle = (url: string, ssl: boolean) => {
    const db = postgres(url, {
        ssl
    });
    return drizzle(client, { schema });
};

export const createDrizzle = (url: string, ssl: boolean) => {
    const db = postgres(url, {
        ssl
    });
    return drizzle(client, { schema });
};

Then use

const db = createDrizzle(env.HYPERDRIVE_URL, env.SSL)

const db = createDrizzle(env.HYPERDRIVE_URL, env.SSL)

where you need to use it.

This would normally be bad because it reconnects to the DB every createDrizzle call. But it's OK with Hyperdrive because Hyperdrive handles pooling for you.

I

Isaac McFadyen•12/28/24, 2:50 AM

Please correct me if I'm wrong on that AJR

A

AJR•12/28/24, 2:50 AM

I'm not familiar enough with Drizzle to answer the original question, but can confirm you're right that the client connection is super fast and would be fine for Hyperdrive.

AAJR I'm not familiar enough with Drizzle to answer the original question, but can co...

I

Isaac McFadyen•12/28/24, 2:50 AM

Then yeah Drizzle itself is lightweight to create so as long as Hyperdrive is OK then it's good.

Pplurk I'm trying to make hyperdrive work in a svelte-kit project that uses drizzle. Al...

A

AJR•12/28/24, 2:51 AM

Ah, also, wouldn't recommend

prepare: false

prepare: false

. We've optimized a bit for the defaults postgres.js uses, so

prepare: true

prepare: true

will generally be preferable. Especially if you have caching enabled.

A

AJR•12/28/24, 2:52 AM

Not, like, a huge deal. But since you're in here asking.

I

Isak•12/29/24, 10:33 PM

It would be helpful if the full configuration names were displayed in the list of hyperdrives on the dashboard. Currently, they are truncated, making it difficult to distinguish between similar names.

I

Isak•12/29/24, 10:40 PM

Would it also be possible to configure the cache on a per-query basis? Some queries can be cached indefinitely, while others require fresh data every time.

IIsak Would it also be possible to configure the cache on a per-query basis? Some quer...

A

AJR•12/30/24, 3:33 AM

This is something that we're actively exploring, it's been a regular request. The challenge is finding a good UX for indicating to Hyperdrive that a query should or should not be cached. We try pretty hard to support as wide an array of ORMs as can use our supported drivers. The various ways they do/don't bundle information into their queries means that a lot of the obvious ways of doing this wouldn't work on various subsets of them.

AAJR This is something that we're actively exploring, it's been a regular request. ...

I

Isak•12/30/24, 5:14 AM

I understand there’s a lot to consider, and I’m looking forward to seeing this shipped in the future.

A

arfath_linklet•12/31/24, 5:01 AM

We're testing out latencies before we can go all-in on cloudflare workers. Considering a single request may have multiple hops between db and worker the latencies are not acceptable when distributing globally. We've kept smart placement on to try and force it to keep it closer to the db but it's been days and multiple requests and we're still seeing local placement. Given that we can't reliably place and predict our workers, it's hard to justify this lock-in. Would the team be able to share how we can reliably hint / enforce smart placement to kick in?

Aarfath_linklet We're testing out latencies before we can go all-in on cloudflare workers. Consi...

A

AJR•12/31/24, 2:08 PM

There's a few moving parts here. Please DM me and we'll get you sorted out.

A

AJR•12/31/24, 2:10 PM

Public answer in case it's useful for others:

Disabled caching will help smart placement (though obviously at the cost of having caching, so it depends on your workload which is better for you)
We have some manual tweaks we can do to help with placement, on request. We're working on automating these steps such that they'll happen for all Hyperdrives without our intervention, that work is in progress.

AAJR There's a few moving parts here. Please DM me and we'll get you sorted out.

A

arfath_linklet•12/31/24, 2:31 PM

Will reach out! Thanks.

M

Mario Alberto•1/1/25, 8:11 PM

Hey

H

Huxwell | Reown•1/2/25, 10:03 AM

Hey team happy new year

I'm trying to figure out the optimal configuration for my worker using postgres.js, Hyperdrive and Supabase.

The first question I have is, what would be the ideal app side connection pool value https://github.com/porsager/postgres?tab=readme-ov-file#the-connection-pool ? ofc it depends on the application but if there's not much concurrent DB queries, I'm guessing the lower the better ? (default is 10 btw)
Regarding the connection string for Hyperdrive, should I use the direct DB connection string to the Postgres instance (current instance provides us 380 max direct client connections and we have 2 Hyperdrive instances connecting to it, one read only with cache and the other for writes and reads without cache). Would that be enough and how could we estimate the maximum client connections when using Hyperdrive ?
Supabase also offers a connection pooler (Supavisor), is there any drawback of using Hypderdrive in combination with Supavisor (1,500 connections included in our current plan). However when using Supavisor in transaction mode (port 6543) we must disable prepared statements and I think that session mode isn't advised in Serverless environments. What would be your suggestion here if applicable ?

We have quite a lot of traffic on our API and we also have special community events that trigger traffic spikes in short periods, eg 1M+ users running multiple requests at the same time. I'm currently doing some load testing which should help me to find the sweat spot but would appreciate your opinion. Thanks in advance.

GitHub

GitHub - porsager/postgres: Postgres.js - The Fastest full featured...

Postgres.js - The Fastest full featured PostgreSQL client for Node.js, Deno, Bun and CloudFlare - porsager/postgres

HHuxwell | Reown Hey team happy new year 🎉 I'm trying to figure out the optimal configuration ...

A

AJR•1/2/25, 2:53 PM

Hello, and happy new year!

The default should be fine for you, it's what we test with most and shouldn't make a ton of difference if there's not a ton of app-level concurrency
Re: using Supavisor vs direct-to-DB connections -- we have seen some folks have issues using Supavisor in transaction mode (the prepared statements issues mostly), so we do not recommend using it with Hyperdrive. We do support prepared statements, and postgres.js uses them quite a lot, so generally we suggest a straight-to-db connection and letting Hyperdrive handle the pooling.
Re: expected connection counts -- we currently cap at 20 per region, so 80-100 total per Hyperdrive.
Re: throughput -- it's going to depend on your query patterns, generally. The mode by which Hyperdrive starts to cap out on throughput is connection exhaustion, so anything that causes connections to be held for longer is going to reduce your throughput. The worst offenders are heavy transactions (can't release a connection back to the pool until a transaction commits or rolls back, obviously), and slow queries (either due to DB CPU time or poor network connectivity to origin).
If you're seriously expecting heavier traffic than what you can comfortably succeed with during your load tests, DM me and let's see what we can do for you. We'll need to ask some questions about your usage to understand how best to help. I am certain @thomasgauvin would be up for scheduling a call to collect some details and discuss.

H

Huxwell | Reown•1/2/25, 3:46 PM

Thanks for the reply, happy to jump on a call whenever works best for you!

S

sam•1/2/25, 6:26 PM

happy new year!! i remember there being a release a few weeks ago that aimed to increase the number of colo's with a local hyperdrive cache (giving zero network-hop cache hits), but it was rolled back temporarily

is there a rough timeline for when we expect this to go out again? or still TBD depending on the investigation? thx for any info

(edit: have an email thread open with y'all already, just pinged here in case useful info for others in the community)

A

AJR•1/2/25, 7:50 PM

We have the fix in place, going to start rolling it out next week. We decided that a change of that scope over the holidays would be unwise.

YYu I have tried the third method, but supabase does not support it.

T

thomasgauvin•1/6/25, 5:23 PM

@Yu can you share more details on the error logs for option 2? It's the one that is the easiest to use

wrangler dev --remote

wrangler dev --remote

D

dave•1/6/25, 8:21 PM

Does Hyperdrive clear cached queries when inserting?

Ddave Does Hyperdrive clear cached queries when inserting?

A

AJR•1/6/25, 8:27 PM

No, right now the cache is strictly TTL-based.

AAJR No, right now the cache is strictly TTL-based.

D

dave•1/6/25, 9:22 PM

Ouch, is there a way to clear it myself yet?

Ddave Ouch, is there a way to clear it myself yet?

A

AJR•1/6/25, 9:24 PM

No. You can cache-bust individual queries by including any volatile function in them (e.g.

SELECT random(), * FROM mytable

SELECT random(), * FROM mytable

SELECT random(), * FROM mytable

SELECT random(), * FROM mytable) but actual cache purge is still on our roadmap.

D

dave•1/7/25, 12:39 AM

Is Hyperdrive (during local dev) known to leak connections?

D

dave•1/7/25, 12:39 AM

Not sure if it’s me, Hyperdrive, or Google Cloud SQL Auth proxy to blame.

Ddave Is Hyperdrive (during local dev) known to leak connections?

A

AJR•1/7/25, 2:56 PM

No, that is not a known issue.

We do rely on the Postgres server closing connections when they disconnect. If some other component is holding them open after we disconnect, then it's possible you would see that behavior.

A

AJR•1/7/25, 2:57 PM

We do hold them open idle for 15 minutes, to prevent the overhead of having to spin up a new one after brief periods of inactivity.

Ssam happy new year!! i remember there being a release a few weeks ago that aimed to ...

A

AJR•1/7/25, 6:33 PM

Just to close the loop, this is now released. Cheers, all.

M

Maraciuca•1/12/25, 8:54 PM

hiya, im desperately trying to understand how to use drizzle, hyperdrive and nextjs on edge but i swear im not getting past the env.HYPERDRIVE.connectionString step

has anyone dealt with some like this before?

D

dave•1/13/25, 4:44 PM

Should I be using

ctx.waitUntil(sql.end());

ctx.waitUntil(sql.end());

ctx.waitUntil(sql.end());

ctx.waitUntil(sql.end()); when I'm using Hyperdrive, or should I never use

sql.end()

sql.end()

sql.end()

sql.end()?

Ddave Should I be using `ctx.waitUntil(sql.end());` when I'm using Hyperdrive, or shou...

I

Isaac McFadyen•1/13/25, 4:46 PM

I think it would depend on how you're connecting? Are you making a connection for each Worker request (new client in the

fetch

fetch

each time)?

I

Isaac McFadyen•1/13/25, 4:46 PM

If so then likely, but if you're using some sort of global/persistent connection then probably not.

IIsaac McFadyen If so then likely, but if you're using some sort of global/persistent connection...

D

dave•1/13/25, 4:46 PM

This is what I'm thinking of doing, putting the session in the global scope..

D

dave•1/13/25, 4:46 PM

not sure if it's a good idea

I found that my hyperdriver was never able to connect to the remote library of supabase locally. The

Similar Threads