Can you try running the sim without telemffb?
Can you try running the sim without telemffb?
FAnd see if the issue is still there.
HWas thinking the same thing
FIf the issue is telemffb then it should be easier to troubleshoot than if it's sim related.
HI don't have any axis bound in fs2020 so nothing happens in the cockpit but the trim release works as intended
HLike in the sim nothing moves but I have loop back on and mapped
HNo issues with collective by the way. That works perfect
FThen I'd say map the axis and test without telemffb.
FOnce you have all that running. Try telemffb and if the issue is still there. Some settings may need to be changed or the developers may be able to help you here.
HI mapped the axis and force trim works without issue. No weird deviations
FPerfect. Now telemffb and let's see what it does.
FMaybe telemffb wanted the axis to be mapped? 
HIt shouldn't because in the manual it tells us not to map it specifically for the h145 because axis control is enabled
FOh ok well if that's how it's supposed to work and you have that issue hopefully the developers can help. As far as the configurator setup I think you are all set.
FJust make a new video explaining the issue and post your configurator settings for reference.
HThe second I started telemffb the stick starts to deviate
H@Number481 help lol
FLol almost there!
HI'm going to turn off all effects except for axis control and force trim in telemffb. Maybe getting dirty data
FThe more information you can get about the issue the better.
FIf you can pinpoint to which setting is causing it even better
HAgreed especially if it helps others
FJust curious.. what are your current spring values? Not balance spring. I saw that you had them at 2% and are they sticky?
HSpring is 100% in global and adaptive re-entering is 20%
HDamper 20, inertia 10, friction 20, static is 5%
FThose percentages aren't for adaptive recentering. Those are spring values per axis.
FAnd are they sticky?
FBasically how much force for the stick to return to center. In your case you don't want to use it.
HI had sticky off. I just unplugged the collective so I can run the one instance and see if there is anything happening
FSo leave spring unchecked.
HWhat do mean force? Where is the value?
FCan you post your configurator values?
FA screenshot.
H
FOk so see under adaptive recentering.
FYou have set spring force or 20% to return to center. Since you don't want the stick to return to center. Disable that spring check.
FIf you scroll up a bit you will she the spring checkbox. You don't need it.
FBut I'd leave adaptive recentering on just in case.
FAlso your pot1 is it assigned to spring? If so.. turn it all the way to the right
FYou have it at zero
HIf I disable the spring I can't modify the the adaptive recenting. I don't have any pots installed
HPot 1 and 2 are disabled
FOk then it won't matter since it isn't sticky
FAnd telemffb will override it.
FBut when you are not on the sim. Having the spring enabled will use 20% of the force to try and center the stick.
HI have no telem effects running. Just axis control and force trim. Same issue. Doesn't matter what I do with the spring on or off in vp configu
HAlso do not have the collective connected
FOk. Then definitely need the help of the developer to see what's going on.
HI also have everything setup in the iPad as shown in the manual.
H
FHopefully it's something simple.