Basically how much force for the stick to return to center. In your case you don't want to use it.
Basically how much force for the stick to return to center. In your case you don't want to use it.
HI had sticky off. I just unplugged the collective so I can run the one instance and see if there is anything happening
FSo leave spring unchecked.
HWhat do mean force? Where is the value?
FCan you post your configurator values?
FA screenshot.
H
FOk so see under adaptive recentering.
FYou have set spring force or 20% to return to center. Since you don't want the stick to return to center. Disable that spring check.
FIf you scroll up a bit you will she the spring checkbox. You don't need it.
FBut I'd leave adaptive recentering on just in case.
FAlso your pot1 is it assigned to spring? If so.. turn it all the way to the right
FYou have it at zero
HIf I disable the spring I can't modify the the adaptive recenting. I don't have any pots installed
HPot 1 and 2 are disabled
FOk then it won't matter since it isn't sticky
FAnd telemffb will override it.
FBut when you are not on the sim. Having the spring enabled will use 20% of the force to try and center the stick.
HI have no telem effects running. Just axis control and force trim. Same issue. Doesn't matter what I do with the spring on or off in vp configu
HAlso do not have the collective connected
FOk. Then definitely need the help of the developer to see what's going on.
HI also have everything setup in the iPad as shown in the manual.
H
FHopefully it's something simple.
HI hope so. Was really looking forward to flying today and showcasing the rhino with telemffb on the channel
D@H145Rotor-Sims I just join the discussion, what's your problem?
HHi Dracks when I use the trim release and let go the stick starts to deviate
DOk on Msfs then ?
DI check in my Rhino and H145
HOnly when telemffb is running.
HDOk i had once this problem
HWhat was the fix?
DOne thing you can try
DIn TelemFFB
DIt's the deadzone of 1 of the settings
DI had put a very high deadzone otherwise I had the same problem as you (maybe the same)
DNo issue without telemffb
DBut issues like you with telemffb on
DI must check my telemffb config and you can try that
DI had a long discussion with Number481 and sent him my logs
HThat would be very helpful, thank you
H@dracks can you export the configuration and send it?
DYep no problem
HThis way I can what has been changed
DI must have a capture in my phone
DAh I remember what Number481 said to me. It's this issue is the same with different liveries ?
DBecause I had 1 livery working well and a second one had issue. Number481 recommended me to recreate the telemffb config for this livery (clone one that worked)
HThe livery I'm using is the hems medical. Do you remember which didn't give you an issue?
HI'm going to try the civilian unit
HJust tried the civilian, same issue