VPforce Controls•12mo ago

It is way lighter than the TM Warthog grip (~1000g) with around 600g. Worked fine with my default se

It is way lighter than the TM Warthog grip (~1000g) with around 600g.
Worked fine with my default settings

FFr4Ged It is way lighter than the TM Warthog grip (~1000g) with around 600g. Worked fin...

Kruger•1/24/25, 1:42 PM

I use a t50cm2 with 200 mm extension and I sometimes have some problems with oscillation in war birds.

Fr4GedOP•1/24/25, 1:46 PM

We will see. Never had issues and I am using that extension as well. Don't fly warbirds though

KKruger I use a t50cm2 with 200 mm extension and I sometimes have some problems with osc...

Anthony•1/24/25, 2:01 PM

That’s a massive extension considering that the Rhino is basically dimensioned to have a built in 160mm extension

Anthony•1/24/25, 2:02 PM

So yeah, I’d see how oscillations could be an issue with what effectively amounts to a 360mm extension

Kruger•1/24/25, 3:10 PM

But for helicopters this setup of mine is gold with the throw restricted to half.

Anthony•1/24/25, 3:36 PM

I used my 200mm extension at first, but I found it to be way too tall

Anthony•1/24/25, 3:37 PM

Got a Z extension instead, 110mm tall, so on the whole that’s still more than what I had before the Rhino, but not going on 40cm tall

Kruger•1/24/25, 3:52 PM

I got all my measurements from a Apache at first an had a 200mm virpil s + virpil z extension on it. After I noticed to much flex for Fixed wing I got rid of the z extension and now I'm pretty happy. I would like to have some more force to it when considering war birds but that's it.

Reed•1/24/25, 3:53 PM

https://youtu.be/V-otHyLWggc?si=k_v0Gei5a2GoVY0E

YouTubeRotor - Sims

All Metal Force Feedback - The Changes I'm Making

Finally, the collective prototype is here and it's amazing! In this vid, I go over some of the details as well as some important changes that will be implemented.

Home cockpit Frames and custom sims parts:

Use discount code H145Rotor-Sims and save 10%
https://simpanels.eu/

Max Flight Controls - Discount Applied Below!
https://bit.ly/3XScHzU...

Wwalmis Yay, FLNKR grip has arrived! 🥳

Anthony•1/25/25, 1:03 AM

I’m basically sitting F5’ing like when a new module’s about to drop, but for the FLNKR grip to become compatible

Rocco Thamanoidis•1/25/25, 3:30 PM

If you are also suffer from Rhino shutting its motors down and disconnects every input while flying DCS, every few minutes ... I found a solution at #

support

AAnthony I’m basically sitting F5’ing like when a new module’s about to drop, but for the...

Old Prospector•1/25/25, 5:00 PM

Waiting for my FLNKR to arrive, taking hand growth pills

VRFGiPJP•1/25/25, 5:22 PM

Question, about shipping and other cost, who should I contact via Discord? Thanks in advanced

AAnthony I’m basically sitting F5’ing like when a new module’s about to drop, but for the...

Kruger•1/25/25, 5:28 PM

Same here

Bob Bushman•1/25/25, 7:14 PM

Not a flanker grip, but I have a head tracker otw and a tv stuck in transit for who knows why.

Bob Bushman•1/25/25, 7:19 PM

I know it definitely won't move during the weekend I still check the tracking five times a day.

AAlighierian The pattern (160x160.3mm) matches the TM Cougar joystick, for what it's worth. ...

Touch_Of_Legend•1/26/25, 12:25 AM

Would you happen to have a link for the mount plates? I’m searching for something more solid to mount this rhino too. Thanks!

Alighierian•1/26/25, 12:27 AM

https://www.monster.tech/en/product/joystick-throttle-mounting-plate/?attribute_pa_joystickthrottle2=vpforce-rhino-joystick-en&attribute_pa_color=black

Can be found via the category pages, under the Extras

MTSIM – MONSTERTECH

Joystick / Throttle Mounting Plate – MTSIM – MONSTERTECH

Chair Mount Attachment Plate Form fastening material.

XXaero Zero you mean Rhino V2 or something ?

Lassekongo•1/26/25, 2:22 AM

Yep

kronk•1/26/25, 4:27 AM

anyone else notice the dcs a10c ii default spring force is weak? It wasn't always like this

kronk•1/26/25, 4:27 AM

I had switched to tele for it

VVRFGiPJP Question, about shipping and other cost, who should I contact via Discord? Thank...

VRFGiPJP•1/26/25, 9:23 AM

any help?

VVRFGiPJP any help?

R7-Cedar•1/26/25, 9:56 AM

Answer, I recommend to check #

faq

VRFGiPJP•1/26/25, 9:59 AM

Checked nothing, but I get some idea

FFr4Ged Preorder was like 60€ cheaper than it is now. 330€ would make me think more abou...

Sprite•1/26/25, 7:45 PM

Not only that, but the price was reduced during the black friday and christmas sale. Virpil very graciously gave me a partial refund for the sale price difference on my preorder. I paid nearly 100$ less than what it is selling for now.

VPforceBot•1/27/25, 12:14 PM

:package:

RHINO #0878 Has Shipped!

VPforceBot•1/27/25, 12:14 PM

:package:

RHINO #0877 Has Shipped!

Wwalmis First impressions are very positive, nice packaging, feels like a very solid pie...

Anthony•1/27/25, 3:11 PM

How long you reckon it’ll take to update the software to make the Rhino compatible with the FLNKR?

Anthony•1/27/25, 3:12 PM

(Note: not trying to sound whiny, I’m just excited and waiting with apprehension like a kid on Christmas right now

)

Anthony•1/27/25, 3:13 PM

“~~Mom! Mom!~~ Walmis, Walmis! When will ~~Santa~~ the FLNKR come?”

m2times_•1/27/25, 3:26 PM

hi, is it safe to pull out the stick connector from rhino and reverse it?

m2times_•1/27/25, 3:27 PM

i want to pull it just enough to be able to rotate it 180 deg

m2times_•1/27/25, 3:29 PM

FA, FO... I unplugged the connector, lmao. There was no slack sadly

m2times_•1/27/25, 4:30 PM

... i had to remove the dust cover and slide the grip mount down in order to plug the cables into the connector. If anyone is going to rotate their connector too, I recommend you start with this. Or ask walmis to do it for you during assembly, if possible.

Mm2times_FA, FO... I unplugged the connector, lmao. There was no slack sadly

Spelljammer1•1/27/25, 9:42 PM

happened to me too

Hammer 1-1•1/28/25, 1:59 AM

my new rhino showed up today

Hammer 1-1•1/28/25, 1:59 AM

now I just need a day off

VRFGiPJP•1/28/25, 9:59 AM

36 more to go...

Spelljammer1•1/28/25, 2:08 PM

FLNKR is here! One more to F5 the drivers page signing up

Old Prospector•1/28/25, 3:49 PM

Any USA FLNKRs received?

OOld Prospector Any USA FLNKRs received?

Xaero Zero•1/28/25, 5:01 PM

negative (

Old Prospector•1/28/25, 5:05 PM

All good, waiting on 5090 anyway ))

OOld Prospector All good, waiting on 5090 anyway ))

Xaero Zero•1/28/25, 5:37 PM

https://tenor.com/view/v%C3%ADcio-addicted-need-gif-25596127

Tenor

Old Prospector•1/28/25, 5:42 PM

no microcenter for me, chances slim

Bob Bushman•1/28/25, 5:51 PM

I honestly think nvidia has been stock piling these for a few months so wouldn't be surprised if there isn't a shortage.

Now they'll dripfeed stores to keep prices from falling but I suspect they have stockpiled them in advance, at least in the US to avoid future tariffs.

Old Prospector•1/28/25, 6:01 PM

I don' t reckon there's any conspiracy

Old Prospector•1/28/25, 6:01 PM

I think they just made a fairly conservative play to produce X of them and have done so

Old Prospector•1/28/25, 6:02 PM

Jensen putting on his nice leather jacket to go lobby in DC against TSMC tariff

Bob Bushman•1/28/25, 6:05 PM

Not a conspiracy, just business, when a future president has been shouting about implementing a day 1 tariff of 20%+ for the last six months maybe he means it.

BBob Bushman Not a conspiracy, just business, when a future president has been shouting about...

Xaero Zero•1/28/25, 6:17 PM

end consumer will just pay 20% more, and that's all about it

It is way lighter than the TM Warthog grip (~1000g) with around 600g. Worked fine with my default se

Similar Threads