Hi all, I just got my Rhino up and running, and everything works fine, but telemffb not working in D

Hi all, I just got my Rhino up and running, and everything works fine, but telemffb not working in DCS. Force feedback also enabled in DCS, and also tried the auto DCS setup in system setup. Anyone have suggestions? Also the Button/hat Source in Loopback not saving. Screenshot attached Thank you

Eagle1OP•2/14/25, 1:20 PM

Allso tried the pot 1/2 in Loopback source to be Rhino but no luck.

EEagle1 Hi all, I just got my Rhino up and running, and everything works fine, but telem...

Bob Bushman•2/14/25, 1:22 PM

Just checking: But stick will be practically dead until you are in a loaded and started aircraft.

And any changes to configurator needs to be applied and stored to stick.

Eagle1OP•2/14/25, 1:28 PM

Stick works in DCS but no telemffb. Nothing shows in settings/master instance when i am in aircraft. I use "store settings" everytime i change anything in Configurator.

Fr4Ged•2/14/25, 1:32 PM

Maybe the telemffb.lua is no bueno?

Eagle1OP•2/14/25, 1:33 PM

VPforceBot•2/14/25, 1:35 PM

:package:

RHINO #0905 Has Shipped!

VPforceBot•2/14/25, 1:35 PM

:package:

RHINO #0904 Has Shipped!

walmis•2/14/25, 1:35 PM

@Eagle1 attach your dcs.log file and export.lua so we can take a look

FFr4Ged Maybe the telemffb.lua is no bueno?

Eagle1OP•2/14/25, 1:36 PM

Is that file missing somewere?

Wwalmis @Eagle1 attach your dcs.log file and export.lua so we can take a look

Eagle1OP•2/14/25, 1:36 PM

Ok, just a moment

walmis•2/14/25, 1:53 PM

I don't see references to telemFFB in DCS log. Probably the module isn't loaded. Can you attach the export.lua from Saved Games directory.
Also let's move this to #

telemffb-user to not clobber up #

general

Eagle1OP•2/14/25, 1:54 PM

OK..Thank you

wolfman59#6013•2/14/25, 4:34 PM

Hello everyone, I would like to know, I have just tested my rhino on DCS, what should I set to feel, for example, the vibration of the aircraft when taxiing, the stall etc...

Wwolfman59#6013 Hello everyone, I would like to know, I have just tested my rhino on DCS, what s...

Fr4Ged•2/14/25, 5:11 PM

you need to run TelemFFB for those effects

FFr4Ged you need to run TelemFFB for those effects

wolfman59#6013•2/14/25, 5:13 PM

ah ok, I'll install it now.

Youtch•2/15/25, 1:18 PM

Anyone observing a different behavior since the last version? I noticed that the first time I get into a DCS module, it does not seem to always take the correct profile specified in TelemFFB. I have to open VB_Configurator and import and apply manually the profile, then it works ok, and then it seems to be able to switch profile correctly from one module to another, and work as well correctly for the rest of the day, each time I get into DCS. Does it have to do with how things are kept into the memory of the Rhino? Just wandering if it is my set-up or something that other people have been noticing since last update?

Youtch•2/15/25, 1:19 PM

Also, for me the RhinoLoopBack does not seem to memorize yet correctly previous joystick assigned, although I thought it was supposed to be fixed in last version

Old Prospector•2/15/25, 3:47 PM

Does the Rhino mount adapter connect to this Virpil thing

Old Prospector•2/15/25, 3:49 PM

All my stuff is put away at the moment so I can't check

YYoutch Anyone observing a different behavior since the last version? I noticed that the...

Youtch•2/15/25, 6:00 PM

I am keeping on having issue since the last update. In the middle of a DCS game, the Rhino stopped and told me that boot loader was detected. I started boot loader and it tells me to upgrade the firmware although the firmware was already up to date, I upgraded anyway. After, the update whatever profiles that I load in VPForce, the Spring force is null, although all this other parameters seems correct.

OOld Prospector Does the Rhino mount adapter connect to this Virpil thing

Jehly•2/15/25, 8:17 PM

I wouldn’t recommend just a clamp to the desk, but maybe someone who runs that can verify

Jehly•2/15/25, 8:17 PM

I use a chair mount

Old Prospector•2/15/25, 8:32 PM

Yea I'm going to use a floor mount

Old Prospector•2/15/25, 8:32 PM

Was just seeing what was possible I guess

Thorngeist•2/16/25, 5:05 PM

Should I use the "Override DCS Spring" effect in TelemFFB? I'm not getting any spring centering in DCS otherwise...

TThorngeist Should I use the "Override DCS Spring" effect in TelemFFB? I'm not getting any s...

walmis•2/16/25, 5:07 PM

DCS should create it's own spring effect. Can you post your dcs.log from saved games

Thorngeist•2/16/25, 5:08 PM

Log here, I think:

dcs.log208.24KB

walmis•2/16/25, 5:17 PM

Hmm, log looks good. Is you USB connection via HUB or direct connection to motherboard?

Thorngeist•2/16/25, 5:19 PM

Via powered HUB.

walmis•2/16/25, 5:21 PM

Try a direct connection to isolate a possible issue. There were some issues reported in the past with some hubs.

Thorngeist•2/16/25, 5:23 PM

Cool, trying now.

Wwalmis Try a direct connection to isolate a possible issue. There were some issues repo...

Thorngeist•2/16/25, 5:34 PM

This was 100% it, like night and day. All of the TelemFFB options were working, but no stick centering. Now I'm fighting the stick to roll, pitch, etc, which I can only assume is proper. Thank you!

Slavko Stanic•2/16/25, 11:48 PM

Anyone know what the wait time is right now? The FAQ is outdated

Bob Bushman•2/16/25, 11:57 PM

I've heard walmis say about two to three months.

Slavko Stanic•2/17/25, 12:04 AM

Oooh tempting

Slavko Stanic•2/17/25, 12:04 AM

Thanks

Bob Bushman•2/17/25, 12:40 AM

I have to remind myself I don't need a second one..

Bob Bushman•2/17/25, 12:41 AM

And my bank account won't like it.

Slavko Stanic•2/17/25, 12:57 AM

I wasn't even in the market for one but wanted to have more grip compatability, now I'm looking at this lol

onebullet95•2/17/25, 1:03 AM

I've been waiting since Dec 4th and according to the Bot, it looks like I'm almost there.

Slavko Stanic•2/17/25, 2:37 AM

Thats not bad, good to know. Thanks

FlatSpin•2/17/25, 5:27 AM

!status

FFlatSpin !status

VPforceBot•2/17/25, 5:27 AM

Hey @FlatSpin,
So the last Shipped RHINO is #0903 on 2025-02-14
Average waiting time from preorder to shipped is 204 days, median is 207 days, max is 437 days
865 Rhinos are shipped in total

Horizon•2/17/25, 11:10 AM

November 16 ordered and just got my payment form

VPforceBot•2/17/25, 3:14 PM

:package:

RHINO #0907 Has Shipped!

VPforceBot•2/17/25, 3:14 PM

:package:

RHINO #0906 Has Shipped!

TonyDarkZero•2/17/25, 3:26 PM

Hello, what’s the approximate lead time for a DIY FFB kit: 57BLF03 x2 + USB to the UK?

TTonyDarkZero Hello, what’s the approximate lead time for a DIY FFB kit: 57BLF03 x2 + USB to t...

walmis•2/17/25, 3:44 PM

It's usually shipped next day, delivery time is approx 7 days

Slavko Stanic•2/17/25, 3:46 PM

What is the Rhino made out of? I do notice 3d printed gears, but what is the frame made of? Looks like aluminum or steel?
Also, with 9nm and possibly a small extension, does this still have the ability to be as strong or stronger than a cam base? I have no reference for what 9nm feels on a grip vs on a wheel.

Bob Bushman•2/17/25, 4:11 PM

Box is painted plywood, and main gimbal is also 3d printed.

Stronger than my virpil bases, albeit didnt try the most powerful springs
But easily twice the force of any medium spring I've tried. But it is difficult to compare, the forces in an ffb stick is just that different.

The base itself has a built in 10cm extension, so most don't need extensions for height, nor for range (its quite common to reduce the range from stock) but some use the virpil z-extension to bring the grip closer.

Hi all, I just got my Rhino up and running, and everything works fine, but telemffb not working in D

Similar Threads

Similar Threads

Similar Threads