Yeah. I would note there that you aren't guaranteed to be running in the same colo twice in a row, s

HHard@Work Yeah. I would note there that you aren't guaranteed to be running in the same co...

D

dave•2/24/25, 10:28 PM

True, but I've noticed they tend to stick in a colo for awhile.

1

1984 Ford Laser•2/24/25, 11:12 PM

This new Images binding looks great! Definitely will simplify multiple parts of my graphics workflow

One question, is there a limit to the number of

.draw()

.draw()

.draw()

.draw() commands that can be done in a single request? Through the existing

draw: []

draw: []

draw: []

draw: [] method, I have been limited to ~70 layers due to 16KB header limit, hoping this will be able to get around that but not sure if the binding is just doing a

fetch()

fetch()

underneath

11984 Ford Laser This new Images binding looks great! Definitely will simplify multiple parts of ...

I

Isaac McFadyen•2/24/25, 11:14 PM

Most bindings are doing fetches underneath, but whether it uses the same format (passed in the header) will depend on the implementation.

IIsaac McFadyen Most bindings are doing fetches underneath, but whether it uses the same format ...

1

1984 Ford Laser•2/24/25, 11:15 PM

All good, I have a batching method that works fine (draw 25 layers, save result, draw next 25 layers on saved result), but this should still simplify that setup a lot

IIsaac McFadyen Most bindings are doing fetches underneath, but whether it uses the same format ...

H

Hard@WorkOP•2/24/25, 11:29 PM

It appends it as JSON in a FormData payload

HHard@Work It appends it as JSON in a FormData payload

I

Isaac McFadyen•2/24/25, 11:30 PM

Good to know, so the 16KB limit wouldn't apply to that then @1984 Ford Laser ^

H

Hard@WorkOP•2/24/25, 11:30 PM

formData.append('transforms', JSON.stringify(transforms));

GitHub

workerd/src/cloudflare/internal/images-api.ts at fe0d71662666cdf193...

The JavaScript / Wasm runtime that powers Cloudflare Workers - cloudflare/workerd

HHard@Work [formData.append('transforms', JSON.stringify(transforms));](https://github.com/...

I

Isaac McFadyen•2/24/25, 11:30 PM

Oh nice it's open-source, I wasn't sure if it was.

IIsaac McFadyen Oh nice it's open-source, I wasn't sure if it was.

H

Hard@WorkOP•2/24/25, 11:30 PM

Most bindings are, iirc

H

Hard@WorkOP•2/24/25, 11:31 PM

Here's a good one: https://github.com/cloudflare/workerd/blob/main/src/workerd/api/r2-bucket.c%2B%2B

GitHub

workerd/src/workerd/api/r2-bucket.c++ at main · cloudflare/workerd

The JavaScript / Wasm runtime that powers Cloudflare Workers - cloudflare/workerd

1

1984 Ford Laser•2/24/25, 11:32 PM

SICK :partyparrot: :catjam:
I spent an entire day debugging that 16KB limit and now days later a solution appears

1

1984 Ford Laser•2/24/25, 11:34 PM

Now I just need a Stream binding

C

CS176•2/25/25, 8:58 AM

Trying to deploy my site on pages and I'm running into issues when deploying a function:

01:51:31.039    Cloning repository...
01:51:31.945    From https://github.com/chrismuntean/Event-Photography
01:51:31.945     * branch            471052acb01bd770cf02209e0756104342d22953 -> FETCH_HEAD
01:51:31.945    
01:51:31.979    HEAD is now at 471052a Created backup file of original development worker
01:51:31.980    
01:51:32.053    
01:51:32.053    Using v2 root directory strategy
01:51:32.073    Success: Finished cloning repository files
01:51:33.605    Checking for configuration in a Wrangler configuration file (BETA)
01:51:33.606    
01:51:34.708    No wrangler.toml file found. Continuing.
01:51:34.708    No build command specified. Skipping build step.
01:51:34.708    Found Functions directory at /functions. Uploading.
01:51:34.714     ⛅️ wrangler 3.101.0
01:51:34.714    -------------------
01:51:35.547    
01:51:35.639    ✘ [ERROR] No routes found when building Functions directory: /opt/buildhome/repo/functions
01:51:35.640    
01:51:35.640    
01:51:35.733    🪵  Logs were written to "/root/.config/.wrangler/logs/wrangler-2025-02-25_08-51-35_301.log"
01:51:35.743    Warning: Wrangler did not find routes when building functions. Skipping.
01:51:35.744    Validating asset output directory
01:51:38.199    Deploying your site to Cloudflare's global network...
01:51:41.797    Uploading... (29/29)
01:51:41.798    ✨ Success! Uploaded 0 files (29 already uploaded) (0.28 sec)
01:51:41.798    
01:51:42.005    ✨ Upload complete!
01:51:44.613    Success: Assets published!
01:51:46.372    Success: Your site was deployed!

01:51:31.039    Cloning repository...
01:51:31.945    From https://github.com/chrismuntean/Event-Photography
01:51:31.945     * branch            471052acb01bd770cf02209e0756104342d22953 -> FETCH_HEAD
01:51:31.945    
01:51:31.979    HEAD is now at 471052a Created backup file of original development worker
01:51:31.980    
01:51:32.053    
01:51:32.053    Using v2 root directory strategy
01:51:32.073    Success: Finished cloning repository files
01:51:33.605    Checking for configuration in a Wrangler configuration file (BETA)
01:51:33.606    
01:51:34.708    No wrangler.toml file found. Continuing.
01:51:34.708    No build command specified. Skipping build step.
01:51:34.708    Found Functions directory at /functions. Uploading.
01:51:34.714     ⛅️ wrangler 3.101.0
01:51:34.714    -------------------
01:51:35.547    
01:51:35.639    ✘ [ERROR] No routes found when building Functions directory: /opt/buildhome/repo/functions
01:51:35.640    
01:51:35.640    
01:51:35.733    🪵  Logs were written to "/root/.config/.wrangler/logs/wrangler-2025-02-25_08-51-35_301.log"
01:51:35.743    Warning: Wrangler did not find routes when building functions. Skipping.
01:51:35.744    Validating asset output directory
01:51:38.199    Deploying your site to Cloudflare's global network...
01:51:41.797    Uploading... (29/29)
01:51:41.798    ✨ Success! Uploaded 0 files (29 already uploaded) (0.28 sec)
01:51:41.798    
01:51:42.005    ✨ Upload complete!
01:51:44.613    Success: Assets published!
01:51:46.372    Success: Your site was deployed!

01:51:31.039    Cloning repository...
01:51:31.945    From https://github.com/chrismuntean/Event-Photography
01:51:31.945     * branch            471052acb01bd770cf02209e0756104342d22953 -> FETCH_HEAD
01:51:31.945    
01:51:31.979    HEAD is now at 471052a Created backup file of original development worker
01:51:31.980    
01:51:32.053    
01:51:32.053    Using v2 root directory strategy
01:51:32.073    Success: Finished cloning repository files
01:51:33.605    Checking for configuration in a Wrangler configuration file (BETA)
01:51:33.606    
01:51:34.708    No wrangler.toml file found. Continuing.
01:51:34.708    No build command specified. Skipping build step.
01:51:34.708    Found Functions directory at /functions. Uploading.
01:51:34.714     ⛅️ wrangler 3.101.0
01:51:34.714    -------------------
01:51:35.547    
01:51:35.639    ✘ [ERROR] No routes found when building Functions directory: /opt/buildhome/repo/functions
01:51:35.640    
01:51:35.640    
01:51:35.733    🪵  Logs were written to "/root/.config/.wrangler/logs/wrangler-2025-02-25_08-51-35_301.log"
01:51:35.743    Warning: Wrangler did not find routes when building functions. Skipping.
01:51:35.744    Validating asset output directory
01:51:38.199    Deploying your site to Cloudflare's global network...
01:51:41.797    Uploading... (29/29)
01:51:41.798    ✨ Success! Uploaded 0 files (29 already uploaded) (0.28 sec)
01:51:41.798    
01:51:42.005    ✨ Upload complete!
01:51:44.613    Success: Assets published!
01:51:46.372    Success: Your site was deployed!

01:51:31.039    Cloning repository...
01:51:31.945    From https://github.com/chrismuntean/Event-Photography
01:51:31.945     * branch            471052acb01bd770cf02209e0756104342d22953 -> FETCH_HEAD
01:51:31.945    
01:51:31.979    HEAD is now at 471052a Created backup file of original development worker
01:51:31.980    
01:51:32.053    
01:51:32.053    Using v2 root directory strategy
01:51:32.073    Success: Finished cloning repository files
01:51:33.605    Checking for configuration in a Wrangler configuration file (BETA)
01:51:33.606    
01:51:34.708    No wrangler.toml file found. Continuing.
01:51:34.708    No build command specified. Skipping build step.
01:51:34.708    Found Functions directory at /functions. Uploading.
01:51:34.714     ⛅️ wrangler 3.101.0
01:51:34.714    -------------------
01:51:35.547    
01:51:35.639    ✘ [ERROR] No routes found when building Functions directory: /opt/buildhome/repo/functions
01:51:35.640    
01:51:35.640    
01:51:35.733    🪵  Logs were written to "/root/.config/.wrangler/logs/wrangler-2025-02-25_08-51-35_301.log"
01:51:35.743    Warning: Wrangler did not find routes when building functions. Skipping.
01:51:35.744    Validating asset output directory
01:51:38.199    Deploying your site to Cloudflare's global network...
01:51:41.797    Uploading... (29/29)
01:51:41.798    ✨ Success! Uploaded 0 files (29 already uploaded) (0.28 sec)
01:51:41.798    
01:51:42.005    ✨ Upload complete!
01:51:44.613    Success: Assets published!
01:51:46.372    Success: Your site was deployed!

C

CS176•2/25/25, 8:59 AM

Not sure how to fix this

C

CS176•2/25/25, 9:00 AM

Deploying via github by the way

S

Silvan•2/25/25, 11:12 AM

wait did i see correctly that we now have images bindings but it dosent support upload? so i still need the api and a formData fetch? :(

CCS176 Trying to deploy my site on pages and I'm running into issues when deploying a f...

W

Walshy•2/25/25, 11:14 AM

what's the issue?

W

Walshy•2/25/25, 11:14 AM

your logs show success

WWalshy your logs show success

C

CS176•2/25/25, 11:14 AM

The function doesn't get deployed

C

CS176•2/25/25, 11:14 AM

I get a 405 err when trying to call it

W

Walshy•2/25/25, 11:15 AM

Wrangler did not find routes when building functions.

W

Walshy•2/25/25, 11:15 AM

it can't find any routes

W

Walshy•2/25/25, 11:15 AM

what does your code look like?

C

CS176•2/25/25, 11:16 AM

addEventListener('fetch', event => {
    event.respondWith(handleRequest(event.request, event))
})

async function handleRequest(request, env) {
    if (request.method !== 'POST') {
        return new Response("Method Not Allowed", { status: 405 });
    }

    try {
      ...

addEventListener('fetch', event => {
    event.respondWith(handleRequest(event.request, event))
})

async function handleRequest(request, env) {
    if (request.method !== 'POST') {
        return new Response("Method Not Allowed", { status: 405 });
    }

    try {
      ...

addEventListener('fetch', event => {
    event.respondWith(handleRequest(event.request, event))
})

async function handleRequest(request, env) {
    if (request.method !== 'POST') {
        return new Response("Method Not Allowed", { status: 405 });
    }

    try {
      ...

addEventListener('fetch', event => {
    event.respondWith(handleRequest(event.request, event))
})

async function handleRequest(request, env) {
    if (request.method !== 'POST') {
        return new Response("Method Not Allowed", { status: 405 });
    }

    try {
      ...

W

Walshy•2/25/25, 11:18 AM

yeah that isn't valid functions code

W

Walshy•2/25/25, 11:19 AM

https://developers.cloudflare.com/pages/functions/get-started/

SSilvan wait did i see correctly that we now have images bindings but it dosent support ...

1

1984 Ford Laser•2/25/25, 11:19 AM

The Images binding is for doing transformations in code

WWalshy yeah that isn't valid functions code

C

CS176•2/25/25, 11:19 AM

Ahh thank you

C

CS176•2/25/25, 11:20 AM

@Walshy | Workers/Pages your always there for my stupid questions

11984 Ford Laser The Images binding is for doing transformations in code

S

Silvan•2/25/25, 11:35 AM

i figured but when they said image bindings i was expecting the entire service
like https://developers.cloudflare.com/images/upload-images/upload-file-worker/

Cloudflare Docs

Upload via a Worker · Cloudflare Images docs

You can use a Worker to upload your image to Cloudflare Images.

SSilvan i figured but when they said image bindings i was expecting the entire service ...

1

1984 Ford Laser•2/25/25, 11:37 AM

Usually they're expecting that the images will be stored somewhere outside Images itself, to be transformed by the binding. I would like your suggestion to be added, as well as listing and getting images directly through the binding instead of needing to pull from R2 or similar

S

Silvan•2/25/25, 11:39 AM

yea i will have to do things like that soon still have to decide if images alone can even do what i want. else its just r2

1

1984 Ford Laser•2/25/25, 11:58 AM

so the Images binding allows a maximum of 10 transforms per call (

"IMAGES_TRANSFORM_ERROR 9432: Bad request: 10 \"transforms\" maximum"

"IMAGES_TRANSFORM_ERROR 9432: Bad request: 10 \"transforms\" maximum"

"IMAGES_TRANSFORM_ERROR 9432: Bad request: 10 \"transforms\" maximum"

"IMAGES_TRANSFORM_ERROR 9432: Bad request: 10 \"transforms\" maximum"). In the docs there is this note for error 9432:

 The Images Binding is not available using legacy billing. Your account is using the legacy Image Resizing subscription. To bind Images to your Worker, you will need to update your plan to the Images subscription in the dashboard.

 The Images Binding is not available using legacy billing. Your account is using the legacy Image Resizing subscription. To bind Images to your Worker, you will need to update your plan to the Images subscription in the dashboard.

 The Images Binding is not available using legacy billing. Your account is using the legacy Image Resizing subscription. To bind Images to your Worker, you will need to update your plan to the Images subscription in the dashboard.

 The Images Binding is not available using legacy billing. Your account is using the legacy Image Resizing subscription. To bind Images to your Worker, you will need to update your plan to the Images subscription in the dashboard.

Is this an error or just part of the runtime?
Edit: I pay for the 'Images Stream Basic' subscription

T

Tiebienotjuh•2/25/25, 11:59 AM

Hi, i have a question about the rules and R2, I have a rule that redirects all traffic on my domain. But i want to setup a custom domain for R2 storage and i want that the traffic on this domain is not redirecting, but showing the content. Will this custom domain thing overwrite the CloudFlare Rule?

D

Deep•2/25/25, 2:04 PM

Hi. I use this a lot when debugging my Pages function - npx wrangler pages deployment tail --environment "preview". But, it often just closes the connection and exits after it spits out a few debugging statements. Is there some type of timeout that I need to configure to keep it listening until I'm done debugging?

M

MEAT SHIELD•2/25/25, 6:50 PM

hi. when I set environment variables they are not available to my pages deployment. see "Environment variables: none". what am I doing wrong?

M

matt•2/25/25, 11:25 PM

in a pages function, can I connect to a cloudflare tunnel if there are no public dns records?

M

matt•2/25/25, 11:49 PM

looks like you need either a dns record or a load balancer, since dns records are public... can i use a load balancer and route to the tunnel if the incoming request contains a header secret?

P

Peps•2/26/25, 2:18 AM

you could totally do that. I forgot if the free plan has access to WAF, but if it does, you could simply create a WAF rule that blocks all requests to that specific subdomain when it doesn't contain a specific header with a pre-determined value

P

Peps•2/26/25, 2:19 AM

another option would be using Cloudflare Access and making use of a service token to programmatically access the protected app (which would mean just setting 2 headers basically)
https://developers.cloudflare.com/cloudflare-one/identity/service-tokens/

M

matt•2/26/25, 2:26 AM

cheers @Peps

I ended up just using a load balancer rule since I already had one in place to route between my Pages app and some backend routes on my k8s service that users need to access. i just added the extra condition to the custom rule and voilà!

although the secret does come through in plaintext in the UI, I will probably need to switch to your method if im looking for something more secure

M

matt•2/26/25, 4:05 AM

how do you create a secret for the Preview branch from the CLI?

T

TetraEtc•2/26/25, 4:18 AM

page, or worker?

T

TetraEtc•2/26/25, 4:22 AM

I believe, just

wrangler pages secret put <key> <value> --environment preview

wrangler pages secret put <key> <value> --environment preview

wrangler pages secret put <key> <value> --environment preview

wrangler pages secret put <key> <value> --environment preview?

M

matt•2/26/25, 4:39 AM

for Pages... but I've been through all the help screens and there's nothing to switch environments

bunx wrangler pages secret list --environment preview
✘ [ERROR] Unknown argument: environment

bunx wrangler pages secret list --environment preview
✘ [ERROR] Unknown argument: environment

bunx wrangler pages secret list --environment preview
✘ [ERROR] Unknown argument: environment

bunx wrangler pages secret list --environment preview
✘ [ERROR] Unknown argument: environment

M

matt•2/26/25, 4:39 AM

oh its

--env

--env

that works! but not documented in any
```
--help
```
```
--help
```
screen

11984 Ford Laser so the Images binding allows a maximum of 10 transforms per call (`"IMAGES_TRANS...

1

1984 Ford Laser•2/26/25, 10:31 AM

Can the Images docs get a Limits page documenting things like this?

W

wolfmankey•2/26/25, 11:53 AM

Hey! Im running a worker that fetches a cloudflare page(static HTML with static assets JS/CSS) and serves it back to the user if a URL-pattern matches.

It seems all the static assets are served totally uncached on each page load. The worker is set to only run on the "/" path, but turned off on "/static-assets".

Do we need to specifically add cache headers for each type, or can this be handled automagically by the CF Page or worker?

S

Silvan•2/26/25, 11:56 AM

Does anyone have a nice way to debug/log latency?
i use workers assets + d1. locally my api and server routes take 20-40ms while in prod its 70-150 and it feels kind of high? d1 reports queries taking less than 1ms.

Yeah. I would note there that you aren't guaranteed to be running in the same colo twice in a row, s

Similar Threads