Software Engineering Courses (SECourses)•10mo ago

WAN 2.1 14B Image-to-Video 480P FP8 working fine now. Thanks!!

JJaviEM WAN 2.1 14B Image-to-Video 480P FP8 working fine now. Thanks!!

Furkan Gözükara SECourses•3/13/25, 11:34 PM

i hope results accurate

Furkan Gözükara SECourses•3/13/25, 11:34 PM

let me know

11nfern0 Hey, did I read correctly that with the new Flux Kohya training I can use the 4...

Furkan Gözükara SECourses•3/13/25, 11:34 PM

yes

Furkan Gözükara SECourses•3/13/25, 11:34 PM

it fits into vram :d

FFurkan Gözükara SECourses it fits into vram :d

1nfern0•3/13/25, 11:36 PM

I thought that was case . Just testing a fresh install. It started ok but seems to have froze and not calculating it/s

11nfern0 I thought that was case . Just testing a fresh install. It started ok but seem...

Furkan Gözükara SECourses•3/13/25, 11:38 PM

it works. make sure that you vram usage is below than 2 gb

Furkan Gözükara SECourses•3/13/25, 11:38 PM

it uses like 28 gb

Furkan Gözükara SECourses•3/13/25, 11:38 PM

also these are when all images 1024x1024

Furkan Gözükara SECourses•3/13/25, 11:38 PM

if you have different res it impacts

1nfern0•3/13/25, 11:39 PM

images are fine, Will check to free up memory. Just noticed I wasn't using onboard GPU for monitor.

1nfern0•3/13/25, 11:39 PM

crippled it

11nfern0 images are fine, Will check to free up memory. Just noticed I wasn't using on...

Furkan Gözükara SECourses•3/13/25, 11:41 PM

ye using too much vram

11nfern0 images are fine, Will check to free up memory. Just noticed I wasn't using on...

Furkan Gözükara SECourses•3/13/25, 11:41 PM

you are using 48GB_GPU_28200MB_6.3_second_it_Tier_1.json right?

FFurkan Gözükara SECourses you are using 48GB_GPU_28200MB_6.3_second_it_Tier_1.json right?

1nfern0•3/13/25, 11:42 PM

48GB_GPU_Quality_Tier_1_40000MB_9.3_Second_IT_Trains_T5_and_T5_Attention for Lora

1nfern0•3/13/25, 11:43 PM

sorry, it's late. it's 40Gb needed for that.

11nfern0 48GB_GPU_Quality_Tier_1_40000MB_9.3_Second_IT_Trains_T5_and_T5_Attention for Lo...

Furkan Gözükara SECourses•3/13/25, 11:43 PM

it literally says 40 gb

1nfern0•3/13/25, 11:43 PM

I'll drop it to the Tier_3

FFurkan Gözükara SECourses it literally says 40 gb 😄

1nfern0•3/13/25, 11:43 PM

long day.

JaviEMOP•3/14/25, 12:17 AM

something is wrong with img to video 14b FP8. After 2-3 frames goes full pink image

JaviEMOP•3/14/25, 12:17 AM

39 minutes to generate it with teacache and FP8

JaviEMOP•3/14/25, 12:20 AM

Doing a second video. I'll post the result here

JaviEMOP•3/14/25, 12:59 AM

WAN 2.1 14B Image-to-Video 480P FP8 is broken

JaviEMOP•3/14/25, 1:03 AM

And the negative prompt box is always empty when you start the app

JaviEMOP•3/14/25, 1:04 AM

should have the default or saved profile prompts, like previous versions

TrumpYouAll•3/14/25, 1:55 AM

@Dr. Furkan Gözükara I just come back and thank you for:
1. the Dreambooth training for 5090 is working ! (In windows)
2. the MAssed Cloud got 300G version for me to train my models !! U are a star ! @Dr. Furkan Gözükara

JMPA•3/14/25, 4:43 AM

hey brothers, is there a way to make social banners without letters/fonts errors? with stable diffusion?

JaviEMOP•3/14/25, 1:35 PM

I think the latest DiffSynth-Studio fix for FP8 on WAN 2.1 14B Image-to-Video 480P has broken the FP16 quality too. I'm testing with previous commit before the FP8 fix

JJaviEM I think the latest DiffSynth-Studio fix for FP8 on WAN 2.1 14B Image-to-Video 48...

JaviEMOP•3/14/25, 2:38 PM

Confirmed

JaviEMOP•3/14/25, 2:38 PM

@Dr. Furkan Gözükara Please revert (or fix) the latest DiffSynth update. It breaks colours and quality in FP16, and in FP8 the video turns completely pink. I think it only affects WAN 2.1 14B Image-to-Video 480P model

PixelMonkey•3/14/25, 3:25 PM

@JaviEM i do noit have that iissue .. strange..
I do have a issue so running video to video

RuntimeError: The size of tensor a (36) must match the size of tensor b (13) at non-singleton dimension 2

PPixelMonkey @JaviEM i do noit have that iissue .. strange.. I do have a issue so running vi...

JaviEMOP•3/14/25, 3:48 PM

I reverted to previous DiffSynth commit and it's working fine again, so it's a problem from the latest commit

JJaviEM I reverted to previous DiffSynth commit and it's working fine again, so it's a p...

PixelMonkey•3/14/25, 4:11 PM

Ok that is weird .. for me it seems to work fine on rtx 3090

JJaviEM WAN 2.1 14B Image-to-Video 480P FP8 is broken

Furkan Gözükara SECourses•3/14/25, 4:38 PM

the offical repo authors made some fixes

Furkan Gözükara SECourses•3/14/25, 4:38 PM

i will move to them back

Furkan Gözükara SECourses•3/14/25, 4:38 PM

i hope it fixes

TTrumpYouAll @Dr. Furkan Gözükara I just come back and thank you for: 1. the Dreambooth trai...

Furkan Gözükara SECourses•3/14/25, 4:38 PM

1 : yes

Furkan Gözükara SECourses•3/14/25, 4:38 PM

2 awesome

JJaviEM And the negative prompt box is always empty when you start the app

Furkan Gözükara SECourses•3/14/25, 4:38 PM

will fix this too

PPixelMonkey @JaviEM i do noit have that iissue .. strange.. I do have a issue so running vi...

Furkan Gözükara SECourses•3/14/25, 4:39 PM

this looks like frame count of video to video

Furkan Gözükara SECourses•3/14/25, 5:10 PM

i am testing newest DiffSynth i hope they added lora properly as we did

blackhat•3/14/25, 5:18 PM

@Dr. Furkan Gözükara can you tell me the commands need to start the swarmui in the runpod bcz i installed and runned it last time with one command and now i have installed i want to run that only so i can use gui to do some generations

Bblackhat @Dr. Furkan Gözükara can you tell me the commands need to start the swarmui in t...

Furkan Gözükara SECourses•3/14/25, 5:42 PM

i have updated commands here https://www.patreon.com/posts/tutorial-instructions-links-public-post-106135985

Patreon

SwarmUI Master Tutorial - Use Stable Diffusion 3.5 Large and FLUX m...

Get more from SECourses: FLUX, Tutorials, Guides, Resources, Training, Scripts on Patreon

Furkan Gözükara SECourses•3/14/25, 5:43 PM

and tutorial here

Furkan Gözükara SECourses•3/14/25, 5:43 PM

https://youtu.be/XFUZof6Skkw

YouTubeSECourses

How to Use SwarmUI & Stable Diffusion 3 on Cloud Services Kaggle (f...

In this video, I demonstrate how to install and use #SwarmUI on cloud services. If you lack a powerful GPU or wish to harness more GPU power, this video is essential. You'll learn how to install and utilize SwarmUI, one of the most powerful Generative AI interfaces, on Massed Compute, RunPod, and Kaggle (which offers free dual T4 GPU access for ...

blackhat•3/14/25, 5:43 PM

thanks a lot

Furkan Gözükara SECourses•3/14/25, 5:43 PM

i have to be afk few hours after that hopefully will fix wan 2.1 errors

smoke•3/14/25, 5:54 PM

@Dr. Furkan Gözükara Would you recommend to always use adetailer for faces (even if it’s a closer face)? Using forge.

And do you know if adetailer would possibly lower likeness of a character lora? Or if it's supposed to increase it

Ssmoke @Dr. Furkan Gözükara Would you recommend to always use adetailer for faces (even...

PixelMonkey•3/14/25, 6:07 PM

hey.. i used forge before as well and switched to SwarmUi and can highly recommend it. I use the facedetaile yolo there and it works amazing. There is no way to achieve that detail out of the box in my opinion, especially witzh multiple character images

PPixelMonkey hey.. i used forge before as well and switched to SwarmUi and can highly recomme...

smoke•3/14/25, 6:16 PM

Will have a look into that! Thanks a lot

Nrkozan•3/14/25, 6:20 PM

I'm looking for a ComfyUI workflow that generates output using a pose and reference image with LoRA.

Does anyone have such a workflow, or is there someone who can help as a freelancer?

WAN 2.1 14B Image-to-Video 480P FP8 working fine now. Thanks!!

Similar Threads

Similar Threads

Similar Threads