![Rat Rig Community [Unofficial]](https://cdn.discordapp.com/icons/582187371529764864/08375bea6b5b9088b6d4cfc2b6e25fba.webp?size=48){kind=icon}
Core V4 500 IDEX - commisioning - first print failed
After posting on FB i ask my question here and added the debug.zip I want to print the skew_correcton.stl from the guide, my first print I use Prusa slicer and imnported the setting as pointed out in the guide.
At first after doing home and Z-tilt the printer made a big blob on the oozeguard_arms. After a good look in the config there was a ! added to the extruder pins. I removed that. Now the blob is put on the print bed, then the print head moves above the oozeguard_arms and retracts the filament, it keeps doeing that saying 'extruder allready active' in the console. What can this be? Thank you in advance!
At first after doing home and Z-tilt the printer made a big blob on the oozeguard_arms. After a good look in the config there was a ! added to the extruder pins. I removed that. Now the blob is put on the print bed, then the print head moves above the oozeguard_arms and retracts the filament, it keeps doeing that saying 'extruder allready active' in the console. What can this be? Thank you in advance!
ratos-debug_1.zip2.47MB
![Rat Rig Community [Unofficial] banner](https://cdn.discordapp.com/banners/582187371529764864/4ee3e42e227d6aac26f048a3e69d5924.webp?size=480)
The #1 unofficial Rat Rig Community on Discord!
14,034Members
Resources
Recent Announcements
Similar Threads
Was this page helpful?
![Rat Rig Community [Unofficial]](https://cdn.discordapp.com/icons/582187371529764864/08375bea6b5b9088b6d4cfc2b6e25fba.webp?size=16){kind=icon}