![Rat Rig Community [Unofficial]](https://cdn.discordapp.com/icons/582187371529764864/08375bea6b5b9088b6d4cfc2b6e25fba.webp?size=48){kind=icon}
Probe samples exceed sample_tolerance
Got the new beacon revision , I am trying to recalibrate my system and during the auto calibrate it kept failing. After many hours and physically checking the printer, verifying that their are nothing in the way of the nozzle I started calibrating it manually step by step.
During the thermal expansion is when it always fails. I PID my nozzle 2x and when it checks the nozle is withing 1.5+_ degrees of the target 150/250 but still fails. Initial and other calibrations work. Its just during thermal expansion that its too large
During the thermal expansion is when it always fails. I PID my nozzle 2x and when it checks the nozle is withing 1.5+_ degrees of the target 150/250 but still fails. Initial and other calibrations work. Its just during thermal expansion that its too large
![Rat Rig Community [Unofficial] banner](https://cdn.discordapp.com/banners/582187371529764864/4ee3e42e227d6aac26f048a3e69d5924.webp?size=480)
![Rat Rig Community [Unofficial]](https://cdn.discordapp.com/icons/582187371529764864/08375bea6b5b9088b6d4cfc2b6e25fba.webp?size=16){kind=icon}