Reed
TTyperactive.xyz
•Created by Reed on 5/15/2025 in #🛟-help
Left-side column 6 (pin 1.11 / TGB+thumb) non-responsive on new build
Thank you @Mike ! 🙏🏼 really appreciate it
9 replies
TTyperactive.xyz
•Created by Reed on 5/15/2025 in #🛟-help
Left-side column 6 (pin 1.11 / TGB+thumb) non-responsive on new build
@Mike any thoughts? order number was #TA17501
9 replies
TTyperactive.xyz
•Created by Reed on 5/15/2025 in #🛟-help
Left-side column 6 (pin 1.11 / TGB+thumb) non-responsive on new build
Update… I also tried swapping the nanos on the right and left side and the same keys on the left hand aren’t working. So I’m fairly certain I’ve narrowed this down to an issue with the pcb
9 replies
TTyperactive.xyz
•Created by erik on 5/17/2025 in #🛟-help
NiceNano Pins Dying
Is there any history of the no solder headers causing damage to the nano or PCB…? I’ve tried everything I can think short of buying a new nano and / or pcb
8 replies
TTyperactive.xyz
•Created by erik on 5/17/2025 in #🛟-help
NiceNano Pins Dying
https://discord.com/channels/924164891990978570/1372706987036643329/1372706987036643329
I think I’m facing a similar issue, although this is on a brand new build and not after a few weeks of wear. I’m 90% sure this is an issue with either my pcb or the nano itself, given I’ve swapped the headers and tried different orientations and the error persists on the same column of keys
8 replies
TTyperactive.xyz
•Created by Nordar on 10/25/2024 in #🛟-help
Corne with premium case: bottom row on the left split stopped working
@Micky thanks!
90 replies
TTyperactive.xyz
•Created by Reed on 5/15/2025 in #🛟-help
Left-side column 6 (pin 1.11 / TGB+thumb) non-responsive on new build
I have also tried flipping the no solder headers upside down and 180 degrees to test if it was a bad pin, and they all led to the same result of non-responsive keys associated with pin 1.11 . So I believe it is either an issue with the nano or the pcb
9 replies
TTyperactive.xyz
•Created by Reed on 5/15/2025 in #🛟-help
Left-side column 6 (pin 1.11 / TGB+thumb) non-responsive on new build
And here’s my firmware for reference
https://github.com/mrbende/dotfiles/tree/main/corne
9 replies
TTyperactive.xyz
•Created by Reed on 5/15/2025 in #🛟-help
Left-side column 6 (pin 1.11 / TGB+thumb) non-responsive on new build
I’ve also looked here
https://docs.typeractive.xyz/troubleshooting/rows-columns-not-working
9 replies
TTyperactive.xyz
•Created by Nordar on 10/25/2024 in #🛟-help
Corne with premium case: bottom row on the left split stopped working
Yes. I posted a separate more detailed help thread here
https://discord.com/channels/924164891990978570/1372706987036643329
90 replies
TTyperactive.xyz
•Created by Nordar on 10/25/2024 in #🛟-help
Corne with premium case: bottom row on the left split stopped working
I do have the solder headers, and I’ve been reading this can be a common issue with the solder less headers. So I could swap to the solder, but a) I’d rather not take it all apart again and b) I don’t want to solder it if I’ll potentially need a new PCB or nano
90 replies
TTyperactive.xyz
•Created by Nordar on 10/25/2024 in #🛟-help
Corne with premium case: bottom row on the left split stopped working
I’ve been playing around with that this morning, I took the acrylic plate off and have tried disconnecting the nano and headers from the pcb and reconnecting… the issue persists
90 replies
TTyperactive.xyz
•Created by Reed on 5/15/2025 in #🛟-help
Left-side column 6 (pin 1.11 / TGB+thumb) non-responsive on new build
The documentation I'm looking at is here... https://docs.typeractive.xyz/build-guides/corne-wireless/troubleshooting
9 replies
TTyperactive.xyz
•Created by Nordar on 10/25/2024 in #🛟-help
Corne with premium case: bottom row on the left split stopped working
90 replies