Have you noticed for the Apache under special options when you select ```INSTANT TRIM (FFB FRIENDLY)

Have you noticed for the Apache under special options when you select

INSTANT TRIM (FFB FRIENDLY)

INSTANT TRIM (FFB FRIENDLY)

INSTANT TRIM (FFB FRIENDLY)

INSTANT TRIM (FFB FRIENDLY)

Joystick Without Springs and FFB

Joystick Without Springs and FFB

Joystick Without Springs and FFB

Joystick Without Springs and FFB

options from the drop downs there is a speed limit to the input. I started flying with my stick and pedals on instant trim option since the day the Apache came out and I didn't realize that my controls where lagging until a few days ago I saw my friends controls and his where perfectly in sync so I had to do some investigation until I found that to fix this I had to choose the

Central Position Trimmer Mode

Central Position Trimmer Mode

Central Position Trimmer Mode

Central Position Trimmer Mode

SwiftVengeanceOP•12/14/22, 12:10 PM

I thought that the Apache was just really hard to fly compared to other helicopter modules and it took me a while to get used to flying it like this.

SwiftVengeanceOP•12/14/22, 12:15 PM

Im still forced to fly with the lag on the pedals though because Joystick Without Springs and FFBJoystick Without Springs and FFB is the only option that doesn't trim my center since I use pedals with only damper

jubuttib•12/14/22, 12:23 PM

... HOLY SHIT.

jubuttib•12/14/22, 12:23 PM

I'd never noticed that!

jubuttib•12/14/22, 12:39 PM

And it's not even a subtle difference.

SwiftVengeanceOP•12/14/22, 12:55 PM

yeah its huge. I cant believe I suffered for so long. Everyone needs to know or this needs to be fixed asap

SwiftVengeanceOP•12/14/22, 12:57 PM

also they need to fix the trimming response curvature for ffb users

Wwalmis There are a couple of arduino projects with FFB - one is Fino. Also there's the ...

SwiftVengeanceOP•12/14/22, 1:13 PM

Thanks, cant wait to try out Fino

SSwiftVengeance yeah its huge. I cant believe I suffered for so long. Everyone needs to know or...

jubuttib•12/14/22, 2:26 PM

Yeah, responded with a video to a topic discussing this on the forums, which up until now had been listed as "Solved".

https://forum.dcs.world/topic/313711-cyclic-stick-deflection-rate-slower-than-actual-joystick/?do=findComment&comment=5106427

ED Forums

cyclic stick deflection rate slower than actual joystick.

For example, when the actual joystick deflects from max left to max right quickly, the cyclic stick in game just deflects from max left to max right slowly, not fully synced to the actual joystick. Is it intended, can I get rid of it? I prefer that they are synced, could give more controllability.

SwiftVengeanceOP•12/14/22, 2:28 PM

https://youtu.be/84KZf48ugVw

YouTubeMr. Simulator

apache test input speed limit

SwiftVengeanceOP•12/14/22, 2:28 PM

I also have

SwiftVengeanceOP•12/14/22, 2:30 PM

I will post

jubuttib•12/14/22, 2:53 PM

You might want to change the name, "input lag" is slightly different to the issue we're having here.

SwiftVengeanceOP•12/14/22, 3:01 PM

done

jubuttib•12/14/22, 3:01 PM

Thanks for bringing this up, really hoping it gets sorted.

SwiftVengeanceOP•12/14/22, 3:01 PM

same

jubuttib•12/14/22, 3:02 PM

I can't really go back to center trim from unsprung, but I tried it quickly and it was indeed way easier to handle.

SwiftVengeanceOP•12/14/22, 3:02 PM

im sure a lot of other pilots are a victim of this bug without realizing

Jjubuttib I can't really go back to center trim from unsprung, but I tried it quickly and ...

SwiftVengeanceOP•12/14/22, 3:03 PM

sorry I don't understand what you mean

SwiftVengeanceOP•12/14/22, 3:04 PM

are you using the "Joystick Without Springs and FFB" option?

jubuttib•12/14/22, 3:17 PM

Yes, I have a joystick that can be easily swapped between sprung and unsprung, and when flying helis I always go unsprung.

jubuttib•12/14/22, 3:17 PM

So the stick is almost never at the center.

jubuttib•12/14/22, 3:18 PM

The meaning was that I don't want to start using "center trim" option again, because I'd have to use springs while flying a helicopter. Really don't want that, so Apache is off the table for now.

Reed•12/14/22, 4:52 PM

Does this lag go away when you are holding the trim button while moving the cyclic?

SwiftVengeanceOP•12/14/22, 5:04 PM

Jjubuttib The meaning was that I don't want to start using "center trim" option again, bec...

SwiftVengeanceOP•12/14/22, 5:07 PM

wouldn't you be able to just ignore the trim button and leave it unbound?

SwiftVengeanceOP•12/14/22, 5:08 PM

if the joystick is springless then means you don't even need trim at all and the center trim option works just fine without it.

SwiftVengeanceOP•12/14/22, 5:09 PM

unless your using spring pedals also with center trim

SSwiftVengeance wouldn't you be able to just ignore the trim button and leave it unbound?

jubuttib•12/14/22, 5:44 PM

That works fine on something like the Huey, but the Apache's autopilot/stability augmentation system will be fighting you all the time. Sometimes you need to tell the autopilot "hey, this is the attitude and heading I want to be holding", and the only way to do that is with the trim button. The trim button is also the only way to reset the autopilot channels when they get saturated.

SwiftVengeanceOP•12/14/22, 5:54 PM

you dont have to use the trim up

SwiftVengeanceOP•12/14/22, 5:54 PM

just trim left right and down

Jjubuttib That works fine on something like the Huey, but the Apache's autopilot/stability...

SwiftVengeanceOP•12/14/22, 5:55 PM

trim up you can use for something else or leave it unbound. trim down resets the auto pilot, trim right engages alt hold and trim left engages att hold

TheLurk🌽•12/15/22, 1:39 AM

You still need to trim for scas sleeve centering else you run out of authority quick

TheLurk🌽•12/15/22, 1:40 AM

Specific for the Apache I should say

TheLurk🌽•12/15/22, 1:41 AM

If you don’t the system will fight you, keeping the trimmer pressed doesn’t work either since that just puts it into rate damping not full scas authority within its band

TheLurk🌽•12/15/22, 1:42 AM

Can just bump trim it to keep the sleeve around your stick position

TTheLurk🌽You still need to trim for scas sleeve centering else you run out of authority q...

SwiftVengeanceOP•12/15/22, 1:47 AM

sorry I dont follow

TheLurk🌽•12/15/22, 1:48 AM

Look at the controls indicator box when flying the Apache

SwiftVengeanceOP•12/15/22, 1:48 AM

yeah?

TheLurk🌽•12/15/22, 1:48 AM

The lighter areas and the green cross

SwiftVengeanceOP•12/15/22, 1:48 AM

yes

TheLurk🌽•12/15/22, 1:49 AM

The green cross is your scas, the light area the authority it has

SwiftVengeanceOP•12/15/22, 1:49 AM

the green cross is your center position yes?

SwiftVengeanceOP•12/15/22, 1:49 AM

for trim

TheLurk🌽•12/15/22, 1:49 AM

It’s what the scas channel is doing

SwiftVengeanceOP•12/15/22, 1:49 AM

alright

TheLurk🌽•12/15/22, 1:50 AM

Basically if you move your stick out of that box the scas can’t do it’s job

TheLurk🌽•12/15/22, 1:51 AM

What trimming does is place the light square around your sticks position giving scas its control authority

SwiftVengeanceOP•12/15/22, 1:51 AM

hmm, so your sayng that you are forced to trim if you want the helicopter to help you fly

Have you noticed for the Apache under special options when you select ```INSTANT TRIM (FFB FRIENDLY)

Similar Threads

Similar Threads

Similar Threads