i guess i just have to play around with the values.. they seem to be in couple of sections..
i guess i just have to play around with the values.. they seem to be in couple of sections..
P@walmis - what are these: "telemetry_item1" and "telemetry_item2" ? Are they defined somewhere ?
WYeah, I'll move the settings to an .ini file once I have some more spare time, would be much better than to hardcode
WThese should be the actual telemetry keys (such as AoA, GunShells, etc). Though these are only used when developing/plotting the telemetry, ignore them otherwise.
Pso, how do I launch it then, if it's optional, like below is the correct string ?
python main.py --teleplot 127.0.0.1:47269 -D ffff:2055
python main.py --teleplot 127.0.0.1:47269 -D ffff:2055
WJust python main.py should work
Por
python main.py ffff:2055
or just:
python main.py
python main.py ffff:2055
or just:
python main.py
Pgotcha, thank you, @walmis !
P@walmis seems theres and error in ffb_rhyno.py, the letter case must be lower case instead upper case, i fixed it on line 255 per the error message
P
Pchanging Device to device laumched it
Pabout to test it
PSound Module from Andres Simshaker cant start due to network port conflict
Pit seems both apps use the same port
P
P@walmis changing teleplot port doesnt fix it, so its some other port... Anyway to change the ports somehow so both apps would run simultaneously ?
Phmm, the app is running, its receiving stuff but the stick doesnt shake at all
P
Pmaybe it needs a new firmware but i cant update it via the browsrer, complains it cant claim the device, however disconnect/connect works, nothing else is using it (vprforce app is off)
P
Pi guess ill wait until someone else figures it out 
Punless A8 isn't supported? will try p51
PQuestion: which serial numbers are being produced at the moment? Is there a way to monitor that? I seem to remember there was, but can't find it on the discord anymore.
Y!status
VHey @yeoldgrog,
So the last Shipped RHINO is #0036 on 2023-01-12
Average waiting time from preorder to shipped is 102 days, median is 110 days, max is 183 days
34 Rhinos are shipped in total
So the last Shipped RHINO is #0036 on 2023-01-12
Average waiting time from preorder to shipped is 102 days, median is 110 days, max is 183 days
34 Rhinos are shipped in total
Y@xupicor
Pah, thanks!
Pstill quite a while till my lucky number then! Half way there.
YThat's not so bad then
V:package: RHINO #0037 Has Shipped!
WIs it possible that you had two tabs open ? It will not work then, I've noticed.
VAy another one out.
AMaster gain seems to go from 0 to 200%, is there a special signifigance to the 100% position?
A!status
VHey @txgunslinger,
So the last Shipped RHINO is #0037 on 2023-01-23
Average waiting time from preorder to shipped is 105 days, median is 110 days, max is 194 days
35 Rhinos are shipped in total
So the last Shipped RHINO is #0037 on 2023-01-23
Average waiting time from preorder to shipped is 105 days, median is 110 days, max is 194 days
35 Rhinos are shipped in total
WIt's currently clamped to 100% in firmware - will need to fix this GUI discrepancy.
W@peachmonkey I've updated https://github.com/walmis/VPforce-TelemFFB
Now features a configuration file and changed the telemetry port to a more random one to not interfere with SimShaker.
P.S run again the
Now features a configuration file and changed the telemetry port to a more random one to not interfere with SimShaker.
P.S run again the
Install the required packages: pip install -r requirements.txtGitHub
DCS FFB Telemetry Effects (for VPforce FFB). Contribute to walmis/VPforce-TelemFFB development by creating an account on GitHub.
Pthis is awesome, @walmis , thank you! I'll give it a try and let you know. Btw, do I need the latest firmware for it? I'm running whatever the version before the latest one..
WIf it's the 1.0.13 then it's good to go!
Pcool, i'll make sure to test it with .13
Pas far as the udp port: are you saying that the client will pick the unused port dynamically? (I don't see how I can use a specific fixed port in the config, unless it's buried somewhere else)..
Wit's here https://github.com/walmis/VPforce-TelemFFB/blob/master/export/TelemFFB.lua#L17 and here https://github.com/walmis/VPforce-TelemFFB/blob/master/main.py#L89
But it should be free
But it should be free
Pi see it: socket.try(self.sock_udp:setpeername("127.255.255.255", 34380))
Pkewl
P@walmis one more question: looking at config.ini I see [default] section, which I assume is used when a specific aircraft isn't defined (like TF-51S or others in .ini). Can I add engine_rumble variable to [default]? And if yes, how can I modify engine_rumble intensity? I see it's only as true/false ..
WThat one will work only for type=PropellerAircraft and RPM from telemetry must come in RPMs (not percentage)
Pyes, I get that, my question is about its intensity..
PI see it in aircraftas.py:
P
Whttps://github.com/walmis/VPforce-TelemFFB/blob/master/aircrafts.py#L161 <- this here
You can define it in ini file as
You can define it in ini file as
engine_rumble_intensity Pawesome, thank you!