VHey @yeoldgrog,
So the last Shipped RHINO is #0036 on 2023-01-12
Average waiting time from preorder to shipped is 102 days, median is 110 days, max is 183 days
34 Rhinos are shipped in total
So the last Shipped RHINO is #0036 on 2023-01-12
Average waiting time from preorder to shipped is 102 days, median is 110 days, max is 183 days
34 Rhinos are shipped in total
Y@xupicor
Pah, thanks!
Pstill quite a while till my lucky number then! Half way there.
YThat's not so bad then
V:package: RHINO #0037 Has Shipped!
WIs it possible that you had two tabs open ? It will not work then, I've noticed.
VAy another one out.
AMaster gain seems to go from 0 to 200%, is there a special signifigance to the 100% position?
A!status
VHey @txgunslinger,
So the last Shipped RHINO is #0037 on 2023-01-23
Average waiting time from preorder to shipped is 105 days, median is 110 days, max is 194 days
35 Rhinos are shipped in total
So the last Shipped RHINO is #0037 on 2023-01-23
Average waiting time from preorder to shipped is 105 days, median is 110 days, max is 194 days
35 Rhinos are shipped in total
WIt's currently clamped to 100% in firmware - will need to fix this GUI discrepancy.
W@peachmonkey I've updated https://github.com/walmis/VPforce-TelemFFB
Now features a configuration file and changed the telemetry port to a more random one to not interfere with SimShaker.
P.S run again the
Now features a configuration file and changed the telemetry port to a more random one to not interfere with SimShaker.
P.S run again the
Install the required packages: pip install -r requirements.txtGitHub
DCS FFB Telemetry Effects (for VPforce FFB). Contribute to walmis/VPforce-TelemFFB development by creating an account on GitHub.
Pthis is awesome, @walmis , thank you! I'll give it a try and let you know. Btw, do I need the latest firmware for it? I'm running whatever the version before the latest one..
WIf it's the 1.0.13 then it's good to go!
Pcool, i'll make sure to test it with .13
Pas far as the udp port: are you saying that the client will pick the unused port dynamically? (I don't see how I can use a specific fixed port in the config, unless it's buried somewhere else)..
Wit's here https://github.com/walmis/VPforce-TelemFFB/blob/master/export/TelemFFB.lua#L17 and here https://github.com/walmis/VPforce-TelemFFB/blob/master/main.py#L89
But it should be free
But it should be free
Pi see it: socket.try(self.sock_udp:setpeername("127.255.255.255", 34380))
Pkewl
P@walmis one more question: looking at config.ini I see [default] section, which I assume is used when a specific aircraft isn't defined (like TF-51S or others in .ini). Can I add engine_rumble variable to [default]? And if yes, how can I modify engine_rumble intensity? I see it's only as true/false ..
WThat one will work only for type=PropellerAircraft and RPM from telemetry must come in RPMs (not percentage)
Pyes, I get that, my question is about its intensity..
PI see it in aircraftas.py:
P
Whttps://github.com/walmis/VPforce-TelemFFB/blob/master/aircrafts.py#L161 <- this here
You can define it in ini file as
You can define it in ini file as
engine_rumble_intensity awesome, thank you!
KAnyone know how many units are sent out pr week? Reason I'm asking is not because I'm impatient, but rather opposite. Need to stall a bit due to financial reasons
Kim number 227
F!status
VHey @.flatspin,
So the last Shipped RHINO is #0037 on 2023-01-23
Average waiting time from preorder to shipped is 105 days, median is 110 days, max is 194 days
35 Rhinos are shipped in total
So the last Shipped RHINO is #0037 on 2023-01-23
Average waiting time from preorder to shipped is 105 days, median is 110 days, max is 194 days
35 Rhinos are shipped in total
KOh, tyvm
SI have a setup where it would be much easier for me to mount the base at the level indicated by the red arrows in the picture. What are the possibilities for placing mounting points there? Would it be possible to modify?
(It's a car-seat from an old BMW where I will make a cut-out for the base and sort of "hang" it below the base level of the seat.)
(It's a car-seat from an old BMW where I will make a cut-out for the base and sort of "hang" it below the base level of the seat.)
RCan anyone explain in simpler terms how to get the DCS telemetry ffbs effects working? I have no idea how this python stuff works....
WI'll make an executable later, but to get it running directly from source you need to install Python3 and Git. Open a powershell window and copy paste the instructions 
ROk. Have Python3 installed but not Git. I'd say thats my issue..
Dhurry up and git it
Agit is bae
R@walmis keep getting this when I copy and paste 'pip install -r requirements.txt'
RDisregard. Python not installed correctly
MDoes the mirage f1 feel a bit soggy after the update to others?
RWhich aircraft are supported?
RI have it running but must be missing something.. the small DCS telemetry window is saying its waiting for telemetry...
R(This is with the F/A-18C)
WShould work on all of them. Could you check if the Export.lua and TelemFFB.lua installed correctly in your c/users/you/Saved Games/DCS/Scripts dir?
WAlso dcs.log might give some clues if script has errored out
RI was in a hurry and hadn't really troubleshooted yet. Maybe it lua files didn't go to correct location. Will check soon.
RMy installation is DCS.Openbeta - so it installed wrong location.
Works now. Incredible potentional here @walmis . Loved the feel of the effects. Even if not quite realistic, it certainly felt natural.
Didn't feel any ground roll/touchdown effects with F/A-18C though? I thought those effects applied to all aircraft by default? Also couldn't feel weapon release..
Works now. Incredible potentional here @walmis . Loved the feel of the effects. Even if not quite realistic, it certainly felt natural.
Didn't feel any ground roll/touchdown effects with F/A-18C though? I thought those effects applied to all aircraft by default? Also couldn't feel weapon release..
WDo you have WeightOnWheels data coming?
RFrom memory, I think so. Does it come through as a decimal value? 0 - 1.0? I think I saw 0.81 on ground..