The !info command appears to not give a response anymore btw
The !info command appears to not give a response anymore btw
A(At least for my email)
FWorking for me
WFixed!
SHaving what I hope is a stupid me issue, but my TM Warthog grip seems to only register the trigger and it lights up everything in the VPForce software. Yes, I've verified it's plugged in correctly (tried both extension cable, and directly to the grip) and verified the buttons work by plugging it back into it's old base. I ran the debugging profile too and it just spammed the FF line with button trigger presses showing 00 00 repeating. This is NOT using the passthrough port you installed, was trying to just use the native interface. I also tried power cycling/unplugging USB. Everything else seems fine and during a test flight the base functioned as expected.
SShort logfile capture if relevant.
samples.csv1.61MB
WWe figured out that the USB voltage on the hub was too high - 5.6V, hence the grip didn't register the 3.3V signaling correctly. When plugged directly into PC it works correctly.
STo build on this, I believe this hub was previously faulty its not an issue with the Rhino or hubs in general. I was just running out of shit to plug shit into.
PIf anyone can help out with the install process for the DCS Telemetry app that'd be cool. I have python installed & the .zip file downloaded from Walmis's github but I'm lost as to what to do with the cmd prompt stuff, I'll be online for a while if anyone is keen to help? Cheers
W- open up windows explorer, navigate to the source files.
- Hold shift and right click on a blank area
- Click
open powershell here - enter
pip3 install -r requirements.txtin powershell prompt - and then
python main.py
P
Pright clicking in this window & typing in the powershell window "pip3 install -r requirements.txt" gives me an error
P
Wtry pip instead of pip3
Pok
Palright, looks like for some reason the installer for python that I got from their site didn't install correctly for this to work, instead I did what Skypickle told me to do in cmd type python & it lead me to windows store, once I did the python install again through the store this time the commands you gave me worked
DI haven't read everything but, would it not be possible to add the base in the simshaker software?
It would be easier then to make profil with different effect
It would be easier then to make profil with different effect
WNo, it's not that simple
POk Walmis what next? Do I put the export .lua file just in the DCS.openbeta folder? or is it in a specific folder?
DBecause of them not wanting you to do it or because of the way the effect is generated being different
DI mean, with a soft between the simshaker app and the base translating app input to input that apply on the base
DIt couldn't?
WYeah, simshaker is very simplistic at it's core and the logic of the control is very different
DSo no way to translate those input into rhino input?
DOr making a similar app for the rhino maybe?
WThat app above is that exact thing 
Wjust run
python main.py it should install the lua stuff automatically
VYep app is great, the only downside is having to run so many apps and exports in the first place for something that should be working natively in the sim
WI'll try integrating auto launch inside the lua script
VAnd as winwing has shown us the exports can greatly impact performance if done wrong, luckily Walmis' script seems to have little to no impact which is great
Pyou mean that one?
Wya
SBTW, I installed npm for windows, built teleplot, got it running, with this showing in the cmd window:
STeleplot server started
Open your browser at 127.0.0.1:8080
Send telemetry with a "key:value" UDP packet to 127.0.0.1:47269
Example:
BASH: echo "myData:1234" | nc -u -w0 127.0.0.1 47269
Open your browser at 127.0.0.1:8080
Send telemetry with a "key:value" UDP packet to 127.0.0.1:47269
Example:
BASH: echo "myData:1234" | nc -u -w0 127.0.0.1 47269
SI opened a browser then started DCS.
STelemetry started appearring in the TelemFFB window
SBut teleplot was not doing anything
SThe TelemFFB cmd showed this:
S2023-02-01 12:22:47 - INFO - Open Rhino HID FFFF:2055
2023-02-01 12:22:47 - INFO - Using 127.0.0.1:47269 for plotting
2023-02-01 12:22:47 - INFO - Listening on UDP :34380
2023-02-01 12:25:16 - WARNING - Aircraft definition not found, using default class for AH-64D_BLK_II
2023-02-01 12:25:16 - INFO - Creating handler for AH-64D_BLK_II: <class 'aircrafts.Aircraft'>
2023-02-01 12:22:47 - INFO - Using 127.0.0.1:47269 for plotting
2023-02-01 12:22:47 - INFO - Listening on UDP :34380
2023-02-01 12:25:16 - WARNING - Aircraft definition not found, using default class for AH-64D_BLK_II
2023-02-01 12:25:16 - INFO - Creating handler for AH-64D_BLK_II: <class 'aircrafts.Aircraft'>
Sso I know the UDP port is correct
WTeleplot is useful for debugging/developing, though not much use for end use cases.
PSo how do I update the effects for planes that other people are adding to the app? Do I just give it the update command through python?
MIf you used git then command from powetshell is > git pull
if not redownload the updated zip from git hub and install
if not redownload the updated zip from git hub and install
PNo I didn't use git, might look at using it next time then instead of doing the install again for each update 
J@walmis , I did set everything up and it works like a charme. Now I'm want to connect my homemade B8 grip. Just the Grip does not talk to the Rhino. I used these Shift register https://de.aliexpress.com/item/1005004847890448.html?spm=a2g0o.order_list.order_list_main.23.13195c5feS1ACo&gatewayAdapt=glo2deu , would they actually work or do I need to get me something different ?
WI think the latch signal needs to be inverted for that one
JOh shoot, so I'm screwed?
WYou can get one of my shift registers
WThere's a profile for them in the software
Wor you could invert the HC165_SL_1 signal with a simple inverter:
