WThat app above is that exact thing 
Wjust run
python main.py
VYep app is great, the only downside is having to run so many apps and exports in the first place for something that should be working natively in the sim
WI'll try integrating auto launch inside the lua script
VAnd as winwing has shown us the exports can greatly impact performance if done wrong, luckily Walmis' script seems to have little to no impact which is great
Pyou mean that one?
Wya
SBTW, I installed npm for windows, built teleplot, got it running, with this showing in the cmd window:
STeleplot server started
Open your browser at 127.0.0.1:8080
Send telemetry with a "key:value" UDP packet to 127.0.0.1:47269
Example:
BASH: echo "myData:1234" | nc -u -w0 127.0.0.1 47269
Open your browser at 127.0.0.1:8080
Send telemetry with a "key:value" UDP packet to 127.0.0.1:47269
Example:
BASH: echo "myData:1234" | nc -u -w0 127.0.0.1 47269
SI opened a browser then started DCS.
STelemetry started appearring in the TelemFFB window
SBut teleplot was not doing anything
SThe TelemFFB cmd showed this:
S2023-02-01 12:22:47 - INFO - Open Rhino HID FFFF:2055
2023-02-01 12:22:47 - INFO - Using 127.0.0.1:47269 for plotting
2023-02-01 12:22:47 - INFO - Listening on UDP :34380
2023-02-01 12:25:16 - WARNING - Aircraft definition not found, using default class for AH-64D_BLK_II
2023-02-01 12:25:16 - INFO - Creating handler for AH-64D_BLK_II: <class 'aircrafts.Aircraft'>
2023-02-01 12:22:47 - INFO - Using 127.0.0.1:47269 for plotting
2023-02-01 12:22:47 - INFO - Listening on UDP :34380
2023-02-01 12:25:16 - WARNING - Aircraft definition not found, using default class for AH-64D_BLK_II
2023-02-01 12:25:16 - INFO - Creating handler for AH-64D_BLK_II: <class 'aircrafts.Aircraft'>
Sso I know the UDP port is correct
WTeleplot is useful for debugging/developing, though not much use for end use cases.
PSo how do I update the effects for planes that other people are adding to the app? Do I just give it the update command through python?
MIf you used git then command from powetshell is > git pull
if not redownload the updated zip from git hub and install
if not redownload the updated zip from git hub and install
PNo I didn't use git, might look at using it next time then instead of doing the install again for each update 
J@walmis , I did set everything up and it works like a charme. Now I'm want to connect my homemade B8 grip. Just the Grip does not talk to the Rhino. I used these Shift register https://de.aliexpress.com/item/1005004847890448.html?spm=a2g0o.order_list.order_list_main.23.13195c5feS1ACo&gatewayAdapt=glo2deu , would they actually work or do I need to get me something different ?
WI think the latch signal needs to be inverted for that one
JOh shoot, so I'm screwed?
WYou can get one of my shift registers
WThere's a profile for them in the software
Wor you could invert the HC165_SL_1 signal with a simple inverter:
JDo you, by any chance got a figure for R1/R2? Its a long time I was in electronics, now I only know that it hurts if I poke something in the power outlet 
JI think an inverter like 74AHC would do as well ?
WR1 R2 can be any, 1-100k, yeah an HC04 inverter would do as well
P
this looks like some sort of star map to me?JThank you.
NDo you need to own the base of any of the grip manufacturers. i.e. Tm Virpil or winwing to get the grip to work or can you just plug them straight into the unit?
VYou can just plug them in, but the only issue is if you want to update the firmware for whatever reason or do typical troubleshooting steps they might ask you to do for a warranty replacement then you'd be unable to
VMaybe not an issue for most, I've had two switches die on my super Taurus throttle and one on my f18 stick, their track record with me isn't the greatest so I may be biased
YIt depends on the grip.
TM and Virpil plug straight in. Winwing needs Walmis' adapter.
The VKB you don't need the base but you do need Walmis' adapter and the black box. Which VKB will sell you separately.
TM and Virpil plug straight in. Winwing needs Walmis' adapter.
The VKB you don't need the base but you do need Walmis' adapter and the black box. Which VKB will sell you separately.
DI wonder how easy to transition to vkb, I hope it isn’t a huge job to do
Pin what way do you mean m8? I have the vkb mcgu & v2 kg12 grips & gladiator base, if you want to know anything about them I can tell you whatever I know that may help you, but as far as their software is concerned all I know is the very basics & that it seems very powerful
PAfter running the main.py I get a small window flash up for a brief moment then after that how do I know if it worked? just go in game & see if I get effects?
SThe small window becomes big and filled w words and changing numbers
SAlt tab to c it if u only have 1 screen
DHow quick is it to switch the vkb adapter back to the standard one, (tm/virpil) one
Pvirpil connection plug always stays on, you simply thread on the vkb adapter on top of it..
DHow long is the process? 5min or more?
Pas fast as you can unscrew a big locking ring
DIf I wanted to go from virpil to vkb and back again, are we talking seconds or longer?
Pseconds, yes
VThe larger issue is making sure you go slow and don't bend the pins, also the 3d printed threads might wear over time, need to be careful not to cross thread with the plastic on metal connections especially
VI hate the mini din connection
DYeah, the threading is why I want metal thread, but walmis isnt planning on doing that
Pthere are no pins on virpil connection embedded in the base, it's a female socket
