2 things that occurred to me that could be an issue.. one is if your printer is calibrated (like if

2 things that occurred to me that could be an issue.. one is if your printer is calibrated (like if a 20mm cube measures 20.00mm or not) the other is rounding errors from digital interpolation.

Mmechsicko 2 things that occurred to me that could be an issue.. one is if your printer is ...

Will3D•3/27/23, 8:19 PM

I had certainly thought about printer error, but I recently printed a sleeve to go over 2020 extrusion at 20.1x20.1mm and it fit like a glove. This seems like a larger error.

Will3D•3/27/23, 8:19 PM

I'm printing yours now.

DDeleted User PointCTRL is great, but damn I want something that can recognize depth and give ...

TheZoq2•3/27/23, 10:10 PM

I made something like that for steamVR using vive trackers. I could send a link if you remind me in a few hours

TheZoq2•3/27/23, 10:11 PM

(It's janky and the code only works on linux, but perhaps someone can steal some ideas

Polack-1•3/28/23, 12:14 AM

got #64 today. Working just fine, I didn't have much time to tinker with it - but actually being able to use trim on the Huey and the Hind is pretty cool!

Polack-1•3/28/23, 12:15 AM

packaged very well, worked out of the box with no problems. Also stick stiffening in Fw190 was nice to see, well, feel!

Polack-1•3/28/23, 12:18 AM

I won't have the time till weekend to really sink my teeth into it - and vpforce config, but I love it. Also - it's so god damned smooth!

Polack-1•3/28/23, 12:18 AM

and the spring feeling can give a good deal of force

Polack-1•3/28/23, 12:19 AM

I see the power supply is 9.5A and the default psu current was set at 7A in the software, there shouldn't be any issue with setting it at 9A - apart from reaching higher temps faster if I hold it against max force?

PiNKSH!T•3/28/23, 12:21 AM

From what I was told, don't touch any of the settings in Expert Settings or Input Filtering

PiNKSH!T•3/28/23, 12:23 AM

I've never even set my master gain to 100% yet, I've left it on 90% & with 100% spring & some other settings warbirds feel really good, never going to need two hands to pull back in a turn but still a lot more stiff & alive feeling than my VKB GF3 base

Polack-1•3/28/23, 12:26 AM

oh it's alive for sure, I've gone vertical in a Fw190 and entered a a lively and... let's call it - acrobatic - spin. The stick was very much alive for a while, until I regained control and got into a dive to recover.

PiNKSH!T•3/28/23, 12:26 AM

IL2 or DCS?

Polack-1•3/28/23, 12:26 AM

DCS

PiNKSH!T•3/28/23, 12:28 AM

ahh nice, I don't have any warbirds for DCS yet, IL2 has been my go to for that. Planning on getting at least a warbird for axis & allied, maybe one from each country eventually

PPolack-1 DCS

PiNKSH!T•3/28/23, 12:28 AM

are you using the Telem app from Walmis?

Polack-1•3/28/23, 12:29 AM

I just got the Rhino this evening, so most of the time I was disassembling, fitting and reassembling the simpit. I say simpit, it's not that impressive, but I still had to disassemble the diy seat to fit the damn thing

Polack-1•3/28/23, 12:29 AM

so just the vpforce ffb configurator

Polack-1•3/28/23, 12:29 AM

need to get the telem app too

PiNKSH!T•3/28/23, 12:30 AM

Do you fly modern aircraft in dcs too? What about heli's?

Polack-1•3/28/23, 12:30 AM

I have all the modules in DCS, just not enough time to fly them all regularly

Polack-1•3/28/23, 12:31 AM

but I do fly helicopters, yes. Huey is a favourite, Mi8 is a my first love though. I crashed so many of them I should have gotten a medal from Zelensky by now

PiNKSH!T•3/28/23, 12:31 AM

nice, yeah my m8 grabbed almost all of them on a sale a year or so back, got like 50% or more off the price, pretty good buy really

Polack-1•3/28/23, 12:32 AM

the Hind is fun to fly, Apache can be annoying but is manageable

Polack-1•3/28/23, 12:32 AM

I can very reliably crash on take off in the gazelle. The only module I bounced off of

Polack-1•3/28/23, 12:32 AM

I mean, I even fly yak52 just for sightseeing

Polack-1•3/28/23, 12:33 AM

and try to put some time into warbirds from time to time

PiNKSH!T•3/28/23, 12:33 AM

Heli's is were the Rhino shines too, force trim actually working in them is so much better, hard to explain how much better it is until you use it

Polack-1•3/28/23, 12:33 AM

yep, flown the Huey and quite a bit with a Hind

Polack-1•3/28/23, 12:34 AM

so far I've managed to fly the copters without trimming because I hated the mechanics of it in a non-ffb stick

PPolack-1 I can very reliably crash on take off in the gazelle. The only module I bounced ...

PiNKSH!T•3/28/23, 12:34 AM

yeah it's a pitty about that module, I really wanted it but I've heard mnegative things about the FM on it

Polack-1•3/28/23, 12:34 AM

now, though... NOW I can trim just fine

Polack-1•3/28/23, 12:34 AM

now I'm going to use it, lol. Because now it feels right

PPolack-1 so far I've managed to fly the copters without trimming because I hated the mech...

PiNKSH!T•3/28/23, 12:35 AM

it's so much better with ffb, just make sure you change the special settings to default

PiNKSH!T•3/28/23, 12:35 AM

for the force trim special setting

Polack-1•3/28/23, 12:35 AM

already did for all of the relevant modules, first thing ;)|

Polack-1•3/28/23, 12:36 AM

alright, I need to go to bed, it's way, waaay past the time I should be already ZzzzZz-ing

Polack-1•3/28/23, 12:37 AM

Now I have to go through all the modules, so of course I'll share my findings

PPolack-1 alright, I need to go to bed, it's way, waaay past the time I should be already ...

PiNKSH!T•3/28/23, 12:37 AM

no worries m8, catch you later & enjoy the Rhino

Polack-1•3/28/23, 12:37 AM

PPolack-1 I can very reliably crash on take off in the gazelle. The only module I bounced ...

mechsickoOP•3/28/23, 2:55 AM

I really hope they end up making that Cobra module they Lucy'd the football with

PPolack-1 I see the power supply is 9.5A and the default psu current was set at 7A in the...

walmis•3/28/23, 4:32 AM

You can increase it to 9A, but the PSU might drop out on sudden changes in power and motors will report Undervoltage fault. So keep that in mind

It might work fine too though.

Mmechsicko 2 things that occurred to me that could be an issue.. one is if your printer is ...

Will3D•3/28/23, 4:43 AM

The print finished. Unfortunately it's the same! Good news is it's not my ( or yours) design, but something else. Probably the 3D printer. I'll take some measurements and try a calibration print later. But I think it is a small error that is accumulated across the teeth.