What values do you get in the telem windows? Can you screenshot it?
What values do you get in the telem windows? Can you screenshot it?
TWhat powersupply should one use with the 86BLF04 motors?
I guess the USB board has a max power and voltage limit?
I guess the USB board has a max power and voltage limit?
W20-24V, 180-350W. Meanwell LRS-350-24 is good one for the price. The USB board only does the power distribution, the main power delivery is inbuilt inside the motors.
W19-20V laptop PSUs work well too
LHow do I use Input loop back tool? Just start it and select my grip?
LIs the "92" supposed to appear when I click the box and push the button in my grip?
LI just found this 
Phey m8, looks like your onto it
Plooks like the consecutive numbers for a HAT swich
Palso you might need to check the 'Override Trim' box too, what sim you playing?
LAll good I just started up in a Huey and flipped that old "force trim" toggle switch I've always had in my pit but for the first time the stick came alive when I did! 
And both trim and trim reset now change the centre point as (I imagine) they'd do in a real one. 
And both trim and trim reset now LYeah I had to come back to correct something... what happens now when I hit trim: the stick DOESN*T move. The centering force just disappears. And it's amazing. 
SDoes anyone notice how far the F-14 default stick position is in DCS? I read that this is a function of the stick curvature of the real airplane that they modeled. I love all the other FFB features of this module, but I need to somehow make an adjustment for the Rhino default position. Any tips? Thanks
HYou can change the endstops of the axis so they bias forward if it bothers you
HIt's not a function of stick curvature, but rather a function of how the stick in a real aircraft works, with the stick "center" not actually being in the physical center of the pitch axis
HSince you don't need the same authority on pitch down as you do for pitch up
LI ran TelemFFB while trying the Huey. Am I correct that Huey doesn't have any translational lift effects yet? Can I just add my own lines to config.ini under these and try?
[UH-1H]
type=Helicopter
[UH-1H]
type=Helicopter
LYea you can
SThank you. Great explanation. I’ll experiment with the forward pitch stop.
MAny of this help?
HHi, I'm trying to get to work the rudder motor. The Rhino joystick is working fine. But I can't get the third motor to deliver some values. I startet the configuration twice and selected different id's, so one is for the joystick and one for the rudder motor. For the rudder motor i get values for cycle time, pot_1,pot_2, curr_x and temp_x. Curr_x is changing if I spin the motor axis but x and y deliver no values even when calibrating. The usb product Id is the same in both instances of the configuration. Any ideas what I could try?
WYou might need to to disable the inactive axis
WIf your motor is on X, you need to check "disable Y" checkbox 
HThank you that helped
HBoth appear as rhino ffb joystick in Windows. Is it easy to change the name or should I let them like this?
WJust change the product id and name
HThank you for your lightning fast support!
H
HWhat does it mean when those values are red?
WMotor physical center is off center.
To fix this you can
To fix this you can
- Remove the belt
- Enter min 0, max 4096
- apply config.
- Enable spring, so motor recenters
- Center your pedals
- Put on the belt
- Recalibrate
HThank you, will try tomorrow
FHello i have two questions, I don’t know if some one has tried the jf-17 DCS native force feedback it’s really great, the stick vibrates progressively as AoA increases, can this be done with the telemetry software with any other airplane, and can trim feature be implemented in harrier with this software ??
MYeah it can be done with the telemetry software in the harrier
MI use like .05 buffering to give it a light burble
FOk the trim can be done with the harrier but the vibration gets stronger with more AoA can be done too ??
MYes
F
VHow ?
MUmm so the buffet in the config file is the start of the ramp so I put that at like 11 (when the canopy starts shaking)
And the stall is the end of the ramp (maybe like 16)
And the buffet amount is how much you want to feel
Which I put at .05 because it’s got hydraulic controls
And the stall is the end of the ramp (maybe like 16)
And the buffet amount is how much you want to feel
Which I put at .05 because it’s got hydraulic controls
MYou kinda just make up what feels good
MIt doesn’t take into account variable flaps though (changing the stall aoa)
FBut the buffer increases with AoA.?
Fand how does the harrier trim can be written ??
BI'll be starting the design work for my stick soon, as the lathe and mill should be operational in a few weeks.
My first question is the reduction ratio of the pulleys, what is going to work best ?
My first question is the reduction ratio of the pulleys, what is going to work best ?
LAs a side note I seem to have become a better virtual pilot since my last flightsim gear purchase 
L
I posted my UH-1H TelemFFB settings in the knowledge base. I'll do Mi-8 next.
VAfter installing a throw limiter (10.5 y axis, 8.4 X axis) I was able to use force comp to resolve the Y axis (value 215) not reaching full but the X axis cant reach full deflection even with the max force comp of 255
Dcould you provide some comment lines so we know what they all mean?
WThanks for the feedback, indeed there's an issue when axis is scaled. I'll take a look at the maths 
WHey, forgot that you can scale down X axis spring globally using the spring curve/mapping feature